diff --git a/boards/same54-xpro/Makefile.features b/boards/same54-xpro/Makefile.features
index 2a0b7d1abcb8..ecf8e7b7f0b4 100644
--- a/boards/same54-xpro/Makefile.features
+++ b/boards/same54-xpro/Makefile.features
@@ -16,6 +16,7 @@ FEATURES_PROVIDED += periph_uart_hw_fc
 FEATURES_PROVIDED += periph_adc
 FEATURES_PROVIDED += periph_usbdev
 FEATURES_PROVIDED += periph_freqm
+FEATURES_PROVIDED += periph_can
 
 # Put other features for this board (in alphabetical order)
 FEATURES_PROVIDED += riotboot
diff --git a/boards/same54-xpro/include/board.h b/boards/same54-xpro/include/board.h
index 50a966787fef..a712f88c6ef9 100644
--- a/boards/same54-xpro/include/board.h
+++ b/boards/same54-xpro/include/board.h
@@ -75,6 +75,13 @@ extern "C" {
 #define BTN0_MODE           GPIO_IN_PU
 /** @} */
 
+/**
+ * @name ATA6561 STANDBY pin definition
+ * @{
+ */
+#define AT6561_STBY_PIN            GPIO_PIN(PC, 13)
+/** @} */
+
 /**
  * @name MTD configuration
  * @{
diff --git a/boards/same54-xpro/include/periph_conf.h b/boards/same54-xpro/include/periph_conf.h
index 33dbb72cfd13..d21ba169812d 100644
--- a/boards/same54-xpro/include/periph_conf.h
+++ b/boards/same54-xpro/include/periph_conf.h
@@ -106,6 +106,27 @@ static const tc32_conf_t timer_config[] = {
 #define TIMER_NUMOF         ARRAY_SIZE(timer_config)
 /** @} */
 
+/**
+ * @name CAN configuration
+ * @{
+ */
+/** Available CAN interfaces */
+static const can_conf_t candev_conf[] = {
+    {
+        .can = CAN1,
+        .rx_pin = GPIO_PIN(PB, 13),
+        .tx_pin = GPIO_PIN(PB, 12),
+        .gclk_src = SAM0_GCLK_PERIPH,
+    }
+};
+
+/** CAN 1 configuration */
+#define ISR_CAN1    isr_can1
+
+/** Number of CAN interfaces */
+#define CAN_NUMOF         ARRAY_SIZE(candev_conf)
+/** @} */
+
 /**
  * @name UART configuration
  * @{
diff --git a/cpu/samd5x/Makefile.dep b/cpu/samd5x/Makefile.dep
index a51a8aa278be..ae047ccf39c2 100644
--- a/cpu/samd5x/Makefile.dep
+++ b/cpu/samd5x/Makefile.dep
@@ -2,4 +2,8 @@ ifneq (,$(filter periph_gpio_tamper_wake,$(USEMODULE)))
   USEMODULE += periph_rtc_rtt
 endif
 
+ifneq (,$(filter periph_can,$(USEMODULE)))
+  FEATURES_REQUIRED += can_rx_mailbox
+endif
+
 include $(RIOTCPU)/sam0_common/Makefile.dep
diff --git a/cpu/samd5x/Makefile.features b/cpu/samd5x/Makefile.features
index 7cba14d2183f..53a3e99d333f 100644
--- a/cpu/samd5x/Makefile.features
+++ b/cpu/samd5x/Makefile.features
@@ -7,5 +7,6 @@ FEATURES_PROVIDED += periph_gpio_tamper_wake
 FEATURES_PROVIDED += periph_rtc_mem
 FEATURES_PROVIDED += periph_spi_on_qspi
 FEATURES_PROVIDED += periph_uart_collision
+FEATURES_PROVIDED += can_rx_mailbox
 
 include $(RIOTCPU)/sam0_common/Makefile.features
diff --git a/cpu/samd5x/include/can_params.h b/cpu/samd5x/include/can_params.h
new file mode 100644
index 000000000000..ac29b9fc1cc2
--- /dev/null
+++ b/cpu/samd5x/include/can_params.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2024 ML!PA Consulting GmbH
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup         cpu_samd5x
+ * @brief           CPU specific definitions for CAN controllers
+ * @{
+ *
+ * @file
+ * @brief           SAMD5x CAN controller (M_CAN Bosch) default device parameters
+ *
+ * @author          Firas Hamdi <firas.hamdi@ml-pa.com>
+ */
+
+#ifndef CAN_PARAMS_H
+#define CAN_PARAMS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "can/device.h"
+
+/** Default SAMD5x CAN devices parameters */
+static const candev_params_t candev_params[] = {
+    {
+        .name = "can_samd5x_0",
+    },
+    {
+        .name = "can_samd5x_1",
+    }
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CAN_PARAMS_H */
+/** @} */
diff --git a/cpu/samd5x/include/candev_samd5x.h b/cpu/samd5x/include/candev_samd5x.h
new file mode 100644
index 000000000000..3e065f93d8cf
--- /dev/null
+++ b/cpu/samd5x/include/candev_samd5x.h
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2024 ML!PA Consulting GmbH
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup         cpu_samd5x
+ * @brief           CPU specific definitions for CAN controllers
+ * @{
+ *
+ * @file
+ * @brief           SAMD5x CAN controller (M_CAN Bosch) driver
+ *
+ * @author          Firas Hamdi <firas.hamdi@ml-pa.com>
+ */
+
+#ifndef CANDEV_SAMD5X_H
+#define CANDEV_SAMD5X_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(CAN_INST_NUM)
+#include "can/candev.h"
+
+#ifndef CANDEV_SAMD5X_DEFAULT_BITRATE
+/** Default bitrate */
+#define CANDEV_SAMD5X_DEFAULT_BITRATE 500000U
+#endif
+
+#ifndef CANDEV_SAMD5X_DEFAULT_SPT
+/** Default sampling-point */
+#define CANDEV_SAMD5X_DEFAULT_SPT 875
+#endif
+
+#ifndef CANDEV_SAMD5X_DEFAULT_STD_FILTER_NUM
+#define CANDEV_SAMD5X_DEFAULT_STD_FILTER_NUM 3
+#endif
+
+#ifndef CANDEV_SAMD5X_DEFAULT_EXT_FILTER_NUM
+#define CANDEV_SAMD5X_DEFAULT_EXT_FILTER_NUM 3
+#endif
+
+#ifndef CANDEV_SAMD5X_DEFAULT_RX_FIFO_0_ELTS_NUM
+#define CANDEV_SAMD5X_DEFAULT_RX_FIFO_0_ELTS_NUM 32
+#endif
+
+#ifndef CANDEV_SAMD5X_DEFAULT_RX_FIFO_1_ELTS_NUM
+#define CANDEV_SAMD5X_DEFAULT_RX_FIFO_1_ELTS_NUM 32
+#endif
+
+#ifndef CANDEV_SAMD5X_DEFAULT_TX_EVT_FIFO_ELTS_NUM
+#define CANDEV_SAMD5X_DEFAULT_TX_EVT_FIFO_ELTS_NUM 16
+#endif
+
+#ifndef CANDEV_SAMD5X_DEFAULT_TX_BUFFER_NUM
+#define CANDEV_SAMD5X_DEFAULT_TX_BUFFER_NUM 16
+#endif
+
+#ifndef CANDEV_SAMD5X_DEFAULT_TX_BUFFER_FIFO_QUEUE_NUM
+#define CANDEV_SAMD5X_DEFAULT_TX_BUFFER_FIFO_QUEUE_NUM 16
+#endif
+
+/* unit: elements */
+#define CANDEV_SAMD5X_MAX_STD_FILTER 128
+#define CANDEV_SAMD5X_MAX_EXT_FILTER 64
+#define CANDEV_SAMD5X_MAX_RX_FIFO_0_ELTS 64
+#define CANDEV_SAMD5X_MAX_RX_FIFO_1_ELTS 64
+#define CANDEV_SAMD5X_MAX_RX_BUFFER 64
+#define CANDEV_SAMD5X_MAX_TX_EVT_FIFO_ELTS 32
+#define CANDEV_SAMD5X_MAX_TX_BUFFER 32
+#define CANDEV_SAMD5X_MSG_RAM_MAX_SIZE 448
+
+/**
+ * @brief CAN device configuration descriptor
+ */
+typedef struct {
+    /** CAN device handler */
+    Can *can;
+    /** CAN Rx pin */
+    gpio_t rx_pin;
+    /** CAN Tx pin */
+    gpio_t tx_pin;
+    /** GCLK source supplying the CAN controller */
+    uint8_t gclk_src;
+} can_conf_t;
+#define HAVE_CAN_CONF_T
+
+/**
+ * @brief CAN message RAM accessible to the CAN controller
+ */
+typedef struct {
+    /** Standard filters space in the CAN message RAM */
+    CanMramSidfe std_filter[CANDEV_SAMD5X_DEFAULT_STD_FILTER_NUM];
+    /** Extended filters space in the CAN message RAM */
+    CanMramXifde ext_filter[CANDEV_SAMD5X_DEFAULT_EXT_FILTER_NUM];
+    /** Reception FIFO_0 space in the CAN message RAM */
+    CanMramRxf0e rx_fifo_0[CANDEV_SAMD5X_DEFAULT_RX_FIFO_0_ELTS_NUM];
+    /** Reception FIFO_1 space in the CAN message RAM */
+    CanMramRxf1e rx_fifo_1[CANDEV_SAMD5X_DEFAULT_RX_FIFO_1_ELTS_NUM];
+    /** Reception buffers space in the CAN message RAM */
+    CanMramRxbe rx_buffer[CANDEV_SAMD5X_MAX_RX_BUFFER];
+    /** Transmission events FIFO space in the CAN message RAM */
+    CanMramTxefe tx_event_fifo[CANDEV_SAMD5X_DEFAULT_TX_EVT_FIFO_ELTS_NUM];
+    /** Transmission FIFO space in the CAN message RAM */
+    CanMramTxbe tx_fifo_queue[CANDEV_SAMD5X_DEFAULT_TX_BUFFER_FIFO_QUEUE_NUM];
+} msg_ram_conf_t;
+
+/**
+ * @brief CAN device descriptor
+ */
+typedef struct {
+    /** Structure to hold driver state */
+    candev_t candev;
+    /** CAN device configuration descriptor */
+    const can_conf_t *conf;
+    /** CAN message RAM accessible to the CAN controller */
+    msg_ram_conf_t msg_ram_conf;
+    /** Enable/Disable Transceiver Delay Compensation */
+    bool tdc_ctrl;
+    /** False to use Tx FIFO operation, True to use Tx Queue operation */
+    bool tx_fifo_queue_ctrl;
+} can_t;
+#define HAVE_CAN_T
+
+/**
+ * @brief   Enable/Disable the transmitter delay compensation
+ *
+ * @param[in] dev   device descriptor
+ *
+ */
+void candev_samd5x_tdc_control(can_t *dev);
+
+/**
+ * @brief   Enter the device into sleep mode
+ *
+ * @param[in] candev   candev driver
+ *
+ */
+void candev_samd5x_enter_sleep_mode(candev_t *candev);
+
+/**
+ * @brief   Wake up the device from sleep mode
+ *
+ * @param[in] candev   candev driver
+ *
+ */
+void candev_samd5x_exit_sleep_mode(candev_t *candev);
+
+#endif /* CAN_INST_NUM */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CANDEV_SAMD5X_H */
+/** @} */
diff --git a/cpu/samd5x/include/periph_cpu.h b/cpu/samd5x/include/periph_cpu.h
index 450941af1f46..26d509ca77a2 100644
--- a/cpu/samd5x/include/periph_cpu.h
+++ b/cpu/samd5x/include/periph_cpu.h
@@ -25,6 +25,7 @@
 #include "macros/units.h"
 #include "periph_cpu_common.h"
 
+#include "candev_samd5x.h"
 #ifdef __cplusplus
 extern "C" {
 #endif
diff --git a/cpu/samd5x/periph/can.c b/cpu/samd5x/periph/can.c
new file mode 100644
index 000000000000..acf201bac358
--- /dev/null
+++ b/cpu/samd5x/periph/can.c
@@ -0,0 +1,802 @@
+/*
+ * Copyright (C) 2023 ML!PA Consulting GmbH
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup     cpu_samd5x
+ * @{
+ *
+ * @file
+ * @brief       Implementation of the CAN controller driver
+ *
+ * @author      Firas Hamdi <firas.hamdi@ml-pa.com>
+ * @}
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include "periph/can.h"
+#include "periph/gpio.h"
+#include "can/device.h"
+
+#define ENABLE_DEBUG 0
+#include "debug.h"
+
+/**
+ * @brief Value from SAMD5x/E5x Family datasheet, Tables 39-13 and 39-17
+ */
+#define CANDEV_SAMD5X_CLASSIC_FILTER 0x02
+/**
+ * @brief Set to 1 to access the internal loopback mode.
+ * Check SAMD5x/E5x Family datasheet, Figure 39-4
+ */
+#define CANDEV_SAMD5X_INTERNAL_LOOPBACK 0
+
+/**
+ * @brief Specific configuration of the CAN filter
+ */
+enum {
+    CANDEV_SAMD5X_FILTER_DISABLE = 0x00,
+    CANDEV_SAMD5X_FILTER_RX_FIFO_0,
+    CANDEV_SAMD5X_FILTER_RX_FIFO_1
+};
+
+/**
+ * @brief Configuration of how to handle frames not matching the CAN filters
+ */
+enum {
+    /* Direct frames not matching any CAN filters applied to Rx FIFO 0 */
+    CAN_ACCEPT_RX_FIFO_0 = 0x00,
+    /* Direct frames not matching any CAN filters applied to Rx FIFO 1 */
+    CAN_ACCEPT_RX_FIFO_1,
+    /* Reject all frames not matching any CAN filters applied */
+    CAN_REJECT
+};
+
+typedef enum {
+    MODE_INIT,
+    MODE_TEST,
+} can_mode_t;
+
+typedef struct {
+    /* Message Marker Put index */
+    uint8_t put:4;
+    /* Message Marker Get index */
+    uint8_t get:4;
+} can_mm_t;
+
+/* Used to handle interrupts generated by the CAN controller 0 */
+static can_t *_can_0;
+/* Used to handle interrupts generated by the CAN controller 1 */
+static can_t *_can_1;
+
+static int _init(candev_t *candev);
+static int _send(candev_t *candev, const struct can_frame *frame);
+static int _set_filter(candev_t *candev, const struct can_filter *filter);
+static int _remove_filter(candev_t *candev, const struct can_filter *filter);
+static int _set(candev_t *candev, canopt_t opt, void *value, size_t value_len);
+static void _isr(candev_t *candev);
+
+static int _set_mode(Can *can, can_mode_t mode);
+
+static const candev_driver_t candev_samd5x_driver = {
+    .init = _init,
+    .send = _send,
+    .set_filter = _set_filter,
+    .remove_filter = _remove_filter,
+    .set = _set,
+    .isr = _isr,
+};
+
+/* Values taken from SAMD5x/E5x datasheet section 39.8.8 */
+static const struct can_bittiming_const bittiming_const = {
+    .tseg1_min = 1,
+    .tseg1_max = 256,
+    .tseg2_min = 1,
+    .tseg2_max = 128,
+    .sjw_max = 128,
+    .brp_min = 1,
+    .brp_max = 512,
+    .brp_inc = 1,
+};
+
+static int _power_on(can_t *dev)
+{
+    if (dev->conf->can == CAN0) {
+        DEBUG_PUTS("CAN0 controller is used");
+        MCLK->AHBMASK.reg |= MCLK_AHBMASK_CAN0;
+    }
+    else if (dev->conf->can == CAN1) {
+        DEBUG_PUTS("CAN1 controller is used");
+        MCLK->AHBMASK.reg |= MCLK_AHBMASK_CAN1;
+    }
+    else {
+        DEBUG_PUTS("Unsupported CAN channel");
+        assert(0);
+    }
+
+    return 0;
+}
+
+static int _power_off(can_t *dev)
+{
+    if (dev->conf->can == CAN0) {
+        DEBUG_PUTS("CAN0 controller is used");
+        MCLK->AHBMASK.reg &= ~MCLK_AHBMASK_CAN0;
+    }
+    else if (dev->conf->can == CAN1) {
+        DEBUG_PUTS("CAN1 controller is used");
+        MCLK->AHBMASK.reg &= ~MCLK_AHBMASK_CAN1;
+    }
+    else {
+        DEBUG_PUTS("Unsupported CAN channel");
+        return -1;
+    }
+
+    return 0;
+}
+
+static void _enter_init_mode(Can *can)
+{
+    can->CCCR.reg |= CAN_CCCR_INIT;
+    while (!(can->CCCR.reg & CAN_CCCR_INIT)) {}
+    DEBUG_PUTS("Device in init mode");
+}
+
+static void _exit_init_mode(Can *can)
+{
+    if (can->CCCR.reg & CAN_CCCR_INIT) {
+        can->CCCR.reg &= ~CAN_CCCR_INIT;
+    }
+
+    while (can->CCCR.reg & CAN_CCCR_INIT) {}
+    DEBUG_PUTS("Device out of init mode");
+}
+
+static int _set_mode(Can *can, can_mode_t can_mode)
+{
+    switch (can_mode) {
+        case MODE_INIT:
+            _enter_init_mode(can);
+            can->CCCR.reg |= CAN_CCCR_CCE;
+            break;
+        case MODE_TEST:
+            DEBUG_PUTS("test mode");
+            _enter_init_mode(can);
+            /* CCCR.TEST and CCCR.MON can be set only when CCCR.INIT and CCCR.CCE are set */
+            can->CCCR.reg |= CAN_CCCR_CCE;
+            can->CCCR.reg |= CAN_CCCR_TEST;
+            can->TEST.reg |= CAN_TEST_LBCK;
+#if IS_ACTIVE(CANDEV_SAMD5X_INTERNAL_LOOPBACK)
+            can->CCCR.reg |= CAN_CCCR_MON;
+#endif
+            _exit_init_mode(can);
+            break;
+        default:
+            DEBUG_PUTS("Unsupported mode");
+            return -1;
+    }
+
+    return 0;
+}
+
+static void _setup_clock(can_t *dev)
+{
+    if (dev->conf->can == CAN0) {
+        GCLK->PCHCTRL[CAN0_GCLK_ID].reg = GCLK_PCHCTRL_CHEN | GCLK_PCHCTRL_GEN(dev->conf->gclk_src);
+    }
+    else if (dev->conf->can == CAN1) {
+        GCLK->PCHCTRL[CAN1_GCLK_ID].reg = GCLK_PCHCTRL_CHEN | GCLK_PCHCTRL_GEN(dev->conf->gclk_src);
+    }
+    else {
+        DEBUG_PUTS("CAN channel not supported");
+    }
+}
+
+static void _set_bit_timing(can_t *dev)
+{
+    assert(dev->candev.bittiming.sjw >= 1);
+    assert(dev->candev.bittiming.phase_seg2 >= 1);
+    assert(dev->candev.bittiming.phase_seg1 + dev->candev.bittiming.prop_seg >= 1);
+    assert(dev->candev.bittiming.brp >= 1);
+
+    DEBUG("bitrate=%" PRIu32 ", sample_point=%" PRIu32 ", brp=%" PRIu32 ", prop_seg=%" PRIu32
+          ", phase_seg1=%" PRIu32 ", phase_seg2=%" PRIu32 ", sjw=%" PRIu32 "\n",
+          dev->candev.bittiming.bitrate, dev->candev.bittiming.sample_point,
+          dev->candev.bittiming.brp, dev->candev.bittiming.prop_seg,
+          dev->candev.bittiming.phase_seg1, dev->candev.bittiming.phase_seg2,
+          dev->candev.bittiming.sjw);
+
+    /* Set bit timing */
+    dev->conf->can->NBTP.reg = (uint32_t)((CAN_NBTP_NTSEG2(dev->candev.bittiming.phase_seg2 - 1))
+                            | (CAN_NBTP_NTSEG1(dev->candev.bittiming.phase_seg1 + dev->candev.bittiming.prop_seg - 1))
+                            | (CAN_NBTP_NBRP(dev->candev.bittiming.brp - 1))
+                            | (CAN_NBTP_NSJW(dev->candev.bittiming.sjw - 1)));
+}
+
+static void _set_tx_fifo_data_size(can_t *dev, uint8_t size) {
+    assert(size < 0x8);
+    dev->conf->can->TXESC.reg |= CAN_TXESC_TBDS(size);
+}
+
+static void _set_rx_buffer_data_size(can_t *dev, uint8_t size) {
+    assert(size < 0x8);
+    dev->conf->can->RXESC.reg |= CAN_RXESC_RBDS(size);
+}
+
+static void _set_rx_fifo_0_data_size(can_t *dev, uint8_t size) {
+    assert(size < 0x8);
+    dev->conf->can->RXESC.reg |= CAN_RXESC_F0DS(size);
+}
+
+static void _set_rx_fifo_1_data_size(can_t *dev, uint8_t size) {
+    assert(size < 0x8);
+    dev->conf->can->RXESC.reg |= CAN_RXESC_F1DS(size);
+}
+
+static void _set_can_pins(can_t *dev)
+{
+    assert(dev->conf->tx_pin != GPIO_UNDEF);
+    assert(dev->conf->rx_pin != GPIO_UNDEF);
+
+    gpio_init(dev->conf->tx_pin, GPIO_OUT);
+    gpio_init(dev->conf->rx_pin, GPIO_IN);
+
+    if (dev->conf->can == CAN0) {
+        gpio_init_mux(dev->conf->tx_pin, GPIO_MUX_I);
+        gpio_init_mux(dev->conf->rx_pin, GPIO_MUX_I);
+    }
+    else if (dev->conf->can == CAN1) {
+        gpio_init_mux(dev->conf->tx_pin, GPIO_MUX_H);
+        gpio_init_mux(dev->conf->rx_pin, GPIO_MUX_H);
+    }
+    else {
+        DEBUG_PUTS("Unsupported can channel");
+    }
+}
+
+void candev_samd5x_enter_sleep_mode(candev_t *candev)
+{
+    can_t *dev = container_of(candev, can_t, candev);
+
+    dev->conf->can->CCCR.reg |= CAN_CCCR_CSR;
+    while (!(dev->conf->can->CCCR.reg & CAN_CCCR_CSA)) {}
+    DEBUG_PUTS("Device in sleep mode");
+}
+
+void candev_samd5x_exit_sleep_mode(candev_t *candev)
+{
+    can_t *dev = container_of(candev, can_t, candev);
+
+    dev->conf->can->CCCR.reg &= ~CAN_CCCR_CSR;
+    while (dev->conf->can->CCCR.reg & CAN_CCCR_CSA) {}
+    DEBUG_PUTS("Device out of sleep mode");
+}
+
+void candev_samd5x_tdc_control(can_t *dev)
+{
+    if (dev->tdc_ctrl) {
+        DEBUG_PUTS("Enable Transceiver Delay Compensation");
+        dev->conf->can->DBTP.reg |= CAN_DBTP_TDC;
+    }
+    else {
+        DEBUG_PUTS("Disable Transceiver Delay Compensation");
+        dev->conf->can->DBTP.reg &= ~(CAN_DBTP_TDC);
+    }
+}
+
+void can_init(can_t *dev, const can_conf_t *conf)
+{
+    dev->candev.driver = &candev_samd5x_driver;
+
+    struct can_bittiming timing = { .bitrate = CANDEV_SAMD5X_DEFAULT_BITRATE,
+                                    .sample_point = CANDEV_SAMD5X_DEFAULT_SPT };
+
+    uint32_t clk_freq = sam0_gclk_freq(conf->gclk_src);
+    can_device_calc_bittiming(clk_freq, &bittiming_const, &timing);
+
+    memcpy(&dev->candev.bittiming, &timing, sizeof(timing));
+    dev->conf = conf;
+}
+
+static void _dump_msg_ram_section(can_t *dev)
+{
+    puts("start address|\tsize of section");
+    printf("Standard filters|\t0x%02lx|\t%lu\n", (uint32_t)(dev->msg_ram_conf.std_filter),
+                                        (uint32_t)(ARRAY_SIZE(dev->msg_ram_conf.std_filter)));
+    printf("Extended filters|\t0x%02lx|\t%lu\n", (uint32_t)(dev->msg_ram_conf.ext_filter),
+                                        (uint32_t)(ARRAY_SIZE(dev->msg_ram_conf.ext_filter)));
+    printf("Rx FIFO 0|\t0x%02lx|\t%lu\n", (uint32_t)(dev->msg_ram_conf.rx_fifo_0),
+                                        (uint32_t)(ARRAY_SIZE(dev->msg_ram_conf.rx_fifo_0)));
+    printf("Rx FIFO 1|\t0x%02lx|\t%lu\n", (uint32_t)(dev->msg_ram_conf.rx_fifo_1),
+                                        (uint32_t)(ARRAY_SIZE(dev->msg_ram_conf.rx_fifo_1)));
+    printf("Rx buffer|\t0x%02lx|\t%lu\n", (uint32_t)(dev->msg_ram_conf.rx_buffer),
+                                        (uint32_t)(ARRAY_SIZE(dev->msg_ram_conf.rx_buffer)));
+    printf("Tx event FIFO|\t0x%02lx|\t%lu\n", (uint32_t)(dev->msg_ram_conf.tx_event_fifo),
+                                        (uint32_t)(ARRAY_SIZE(dev->msg_ram_conf.tx_event_fifo)));
+    printf("Tx buffer|\t0x%02lx|\t%lu\n", (uint32_t)(dev->msg_ram_conf.tx_fifo_queue),
+                                        (uint32_t)(ARRAY_SIZE(dev->msg_ram_conf.tx_fifo_queue)));
+}
+
+static int _init(candev_t *candev)
+{
+    can_t *dev = container_of(candev, can_t, candev);
+    int res = 0;
+
+    sam0_gclk_enable(dev->conf->gclk_src);
+
+    _setup_clock(dev);
+    _power_on(dev);
+
+    _set_can_pins(dev);
+
+    res = _set_mode(dev->conf->can, MODE_INIT);
+    if (res != 0) {
+        return -1;
+    }
+
+    _set_bit_timing(dev);
+
+    candev_samd5x_tdc_control(dev);
+
+    /*Configure the start addresses of the RAM message sections */
+    dev->conf->can->SIDFC.reg = CAN_SIDFC_FLSSA((uint32_t)(dev->msg_ram_conf.std_filter))
+                            | CAN_SIDFC_LSS((uint32_t)(ARRAY_SIZE(dev->msg_ram_conf.std_filter)));
+    dev->conf->can->XIDFC.reg = CAN_XIDFC_FLESA((uint32_t)(dev->msg_ram_conf.ext_filter))
+                            | CAN_XIDFC_LSE((uint32_t)(ARRAY_SIZE(dev->msg_ram_conf.ext_filter)));
+    dev->conf->can->RXF0C.reg = CAN_RXF0C_F0SA((uint32_t)(dev->msg_ram_conf.rx_fifo_0))
+                            | CAN_RXF0C_F0S((uint32_t)(ARRAY_SIZE(dev->msg_ram_conf.rx_fifo_0)));
+    dev->conf->can->RXF1C.reg = CAN_RXF1C_F1SA((uint32_t)(dev->msg_ram_conf.rx_fifo_1))
+                            | CAN_RXF1C_F1S((uint32_t)(ARRAY_SIZE(dev->msg_ram_conf.rx_fifo_1)));
+    dev->conf->can->RXBC.reg = CAN_RXBC_RBSA((uint32_t)(dev->msg_ram_conf.rx_buffer));
+    dev->conf->can->TXEFC.reg = CAN_TXEFC_EFSA((uint32_t)(dev->msg_ram_conf.tx_event_fifo))
+                            | CAN_TXEFC_EFS((uint32_t)(ARRAY_SIZE(dev->msg_ram_conf.tx_event_fifo)));
+    dev->conf->can->TXBC.reg = CAN_TXBC_TBSA((uint32_t)(dev->msg_ram_conf.tx_fifo_queue))
+                            | CAN_TXBC_TFQS((uint32_t)(ARRAY_SIZE(dev->msg_ram_conf.tx_fifo_queue)));
+
+    /* In the vendor file, the data field size in CanMramTxbe is set to 64 bytes
+        although it can be configurable. That's why 64 bytes is used here by default */
+    _set_tx_fifo_data_size(dev, CAN_RXESC_F1DS_DATA64_Val);
+    /* In the vendor file, the data field size in CanMramRxbe is set to 64 bytes
+        although it can be configurable. That's why 64 bytes is used here by default */
+    _set_rx_buffer_data_size(dev, CAN_RXESC_RBDS_DATA64_Val);
+    /* In the vendor file, the data field size in CanMramRxf0e is set to 64 bytes
+        although it can be configurable. That's why 64 bytes is used here by default */
+    _set_rx_fifo_0_data_size(dev, CAN_RXESC_F0DS_DATA64_Val);
+    /* In the vendor file, the data field size in CanMramRxf1e is set to 64 bytes
+        although it can be configurable. That's why 64 bytes is used here by default */
+    _set_rx_fifo_1_data_size(dev, CAN_RXESC_F1DS_DATA64_Val);
+
+    if (IS_ACTIVE(ENABLE_DEBUG)) {
+        _dump_msg_ram_section(dev);
+    }
+    /* Disable automatic retransmission by default */
+    /* This can be added as a configuration parameter for the CAN controller */
+    dev->conf->can->CCCR.reg |= CAN_CCCR_DAR;
+
+    /* Reject all remote frames */
+    dev->conf->can->GFC.reg |= CAN_GFC_RRFE | CAN_GFC_RRFS;
+
+    /* Enable reception interrupts: reception on FIFO0 and FIFO1 */
+    dev->conf->can->IE.reg |= CAN_IE_RF0NE | CAN_IE_RF1NE;
+    /* Enable transmission events interrupts */
+    dev->conf->can->IE.reg |= CAN_IE_TEFNE;
+    /* Enable the interrupt lines */
+    dev->conf->can->ILE.reg = CAN_ILE_EINT0 | CAN_ILE_EINT1;
+
+    /* Enable the peripheral's interrupt */
+    if (dev->conf->can == CAN0) {
+        NVIC_EnableIRQ(CAN0_IRQn);
+        _can_0 = dev;
+    }
+    else {
+        NVIC_EnableIRQ(CAN1_IRQn);
+        _can_1 = dev;
+    }
+
+    /* Exit initialization mode */
+    _exit_init_mode(dev->conf->can);
+
+    return res;
+}
+
+static uint8_t _form_message_marker(can_mm_t *can_mm)
+{
+    return can_mm->put | (can_mm->get << 4);
+}
+
+static int _send(candev_t *candev, const struct can_frame *frame)
+{
+    can_t *dev = container_of(candev, can_t, candev);
+
+    if (frame->can_dlc > CAN_MAX_DLEN) {
+        DEBUG_PUTS("CAN frame payload not supported");
+        return -1;
+    }
+
+    /* Check if the Tx FIFO is full */
+    if (dev->conf->can->TXFQS.reg & CAN_TXFQS_TFQF) {
+        DEBUG_PUTS("Tx FIFO is full");
+        return -1;
+    }
+
+    can_mm_t can_mm = {0};
+    uint8_t fifo_queue_put_idx = (dev->conf->can->TXFQS.reg >> CAN_TXFQS_TFQPI_Pos) & 0x1F;
+    DEBUG("Tx FIFO put index = %u\n", fifo_queue_put_idx);
+    uint8_t fifo_queue_get_idx = (dev->conf->can->TXFQS.reg >> CAN_TXFQS_TFGI_Pos) & 0x1F;
+    DEBUG("Tx FIFO get index = %u\n", fifo_queue_get_idx);
+    can_mm.put = fifo_queue_put_idx;
+    can_mm.get = fifo_queue_get_idx;
+
+    if (frame->can_id & CAN_EFF_FLAG) {
+        DEBUG_PUTS("Extended ID");
+        dev->msg_ram_conf.tx_fifo_queue[can_mm.put].TXBE_0.bit.ID = frame->can_id & CAN_EFF_MASK;
+        dev->msg_ram_conf.tx_fifo_queue[can_mm.put].TXBE_0.bit.XTD = 1;
+    }
+    else {
+        DEBUG_PUTS("Standard identifier");
+        dev->msg_ram_conf.tx_fifo_queue[can_mm.put].TXBE_0.bit.ID = (frame->can_id & CAN_SFF_MASK) << 18;
+        dev->msg_ram_conf.tx_fifo_queue[can_mm.put].TXBE_0.bit.XTD = 0;
+    }
+    dev->msg_ram_conf.tx_fifo_queue[can_mm.put].TXBE_0.bit.RTR = (frame->can_id & CAN_RTR_FLAG) >> 30;
+    dev->msg_ram_conf.tx_fifo_queue[can_mm.put].TXBE_0.bit.ESI = 1;
+    dev->msg_ram_conf.tx_fifo_queue[can_mm.put].TXBE_1.bit.DLC = frame->can_dlc;
+    dev->msg_ram_conf.tx_fifo_queue[can_mm.put].TXBE_1.bit.EFC = 1;
+    dev->msg_ram_conf.tx_fifo_queue[can_mm.put].TXBE_1.bit.MM = _form_message_marker(&can_mm);
+    memcpy((void *)dev->msg_ram_conf.tx_fifo_queue[can_mm.put].TXBE_DATA, frame->data, frame->can_dlc);
+
+    /* Request transmission */
+    dev->conf->can->TXBAR.reg |= (1 << can_mm.put);
+
+    return 0;
+}
+
+static int16_t _find_filter(can_t *can, const struct can_filter *filter, bool is_std_filter)
+{
+    int16_t idx = -1;
+
+    /* Standard filter */
+    if (is_std_filter) {
+        /* Search for the standard filter in the CAN controller message RAM */
+        for (uint8_t i = 0; i < ARRAY_SIZE(can->msg_ram_conf.std_filter); i++) {
+            if (((filter->can_id & CAN_SFF_MASK) == can->msg_ram_conf.std_filter[i].SIDFE_0.bit.SFID1)) {
+                idx = i;
+                break;
+            }
+        }
+    }
+    /* Extended filter */
+    else {
+        /* Search for the extended filter in the CAN controller message RAM */
+        for (uint8_t i = 0; i < ARRAY_SIZE(can->msg_ram_conf.ext_filter); i++) {
+            if (((filter->can_id & CAN_EFF_MASK) == can->msg_ram_conf.ext_filter[i].XIDFE_0.bit.EFID1)) {
+                idx = i;
+                break;
+            }
+        }
+    }
+
+    return idx;
+}
+
+static int _set_filter(candev_t *candev, const struct can_filter *filter)
+{
+    can_t *dev = container_of(candev, can_t, candev);
+
+    int16_t idx = 0;
+    uint8_t filter_conf = 0;
+    switch (filter->target_mailbox) {
+        case 0:
+            filter_conf = CANDEV_SAMD5X_FILTER_RX_FIFO_0;
+            break;
+        case 1 :
+            filter_conf = CANDEV_SAMD5X_FILTER_RX_FIFO_1;
+            break;
+        default:
+            puts("Invalid target mailbox --> Do not apply filter");
+            return -1;
+    }
+    if (filter->can_id & CAN_EFF_FLAG) {
+        DEBUG_PUTS("Extended filter to add in the extended filter section of the message RAM");
+        /* Check if the filter already exists */
+        idx = _find_filter(dev, filter, false);
+        if (idx != -1) {
+            DEBUG_PUTS("Extended filter already exists --> Update it");
+        }
+        else {
+            /* Find a free slot where to save the filter */
+            for (idx = 0; (uint16_t)idx < ARRAY_SIZE(dev->msg_ram_conf.ext_filter); idx++) {
+                if (dev->msg_ram_conf.ext_filter[idx].XIDFE_0.bit.EFEC == CANDEV_SAMD5X_FILTER_DISABLE) {
+                    DEBUG_PUTS("empty slot");
+                    break;
+                }
+            }
+        }
+
+        if (idx == ARRAY_SIZE(dev->msg_ram_conf.ext_filter)) {
+            DEBUG_PUTS("Reached maximum capacity of extended filters --> Could not add filter");
+            return -1;
+        }
+
+        DEBUG("Extended Filter to add at idx = %d\n", idx);
+        dev->msg_ram_conf.ext_filter[idx].XIDFE_0.bit.EFEC = filter_conf;
+        /* For now, only CLASSIC filters are supported */
+        dev->msg_ram_conf.ext_filter[idx].XIDFE_1.bit.EFT = CANDEV_SAMD5X_CLASSIC_FILTER;
+        dev->msg_ram_conf.ext_filter[idx].XIDFE_0.bit.EFID1 = filter->can_id;
+        dev->msg_ram_conf.ext_filter[idx].XIDFE_1.bit.EFID2 = filter->can_mask & CAN_EFF_MASK;
+        DEBUG("Extended message ID filter element N°%d = 0x%02lx\n", idx,
+                                    (uint32_t)(dev->msg_ram_conf.std_filter[idx].SIDFE_0.reg));
+        _set_mode(dev->conf->can, MODE_INIT);
+        /* Reject all extended frames that are not matching the filters applied */
+        dev->conf->can->GFC.reg |= CAN_GFC_ANFE((uint32_t)CAN_REJECT);
+        _exit_init_mode(dev->conf->can);
+    }
+    else {
+        DEBUG_PUTS("Standard filter to add in the standard filter section of the message RAM");
+        /* Check if the filter already exists */
+        idx = _find_filter(dev, filter, true);
+        if (idx != -1) {
+            DEBUG_PUTS("Standard filter already exists --> Update it");
+        }
+        else {
+            /* Find a free slot where to save the filter */
+            for (idx = 0; (uint16_t)idx < ARRAY_SIZE(dev->msg_ram_conf.std_filter); idx++) {
+                if (dev->msg_ram_conf.std_filter[idx].SIDFE_0.bit.SFEC == CANDEV_SAMD5X_FILTER_DISABLE) {
+                    DEBUG_PUTS("empty slot");
+                    break;
+                }
+            }
+        }
+
+        if (idx == ARRAY_SIZE(dev->msg_ram_conf.std_filter)) {
+            DEBUG_PUTS("Reached maximum capacity of standard filters --> Could not add filter");
+            return -1;
+        }
+
+        DEBUG("Standard Filter to add at idx = %d\n", idx);
+        dev->msg_ram_conf.std_filter[idx].SIDFE_0.bit.SFEC = filter_conf;
+        /* For now, only CLASSIC filters are supported */
+        dev->msg_ram_conf.std_filter[idx].SIDFE_0.bit.SFT = CANDEV_SAMD5X_CLASSIC_FILTER;
+        dev->msg_ram_conf.std_filter[idx].SIDFE_0.bit.SFID1 = filter->can_id & CAN_SFF_MASK;
+        dev->msg_ram_conf.std_filter[idx].SIDFE_0.bit.SFID2 = filter->can_mask & CAN_SFF_MASK;
+        DEBUG("Standard message ID filter element N°%d = 0x%02lx\n", idx,
+                                    (uint32_t)(dev->msg_ram_conf.std_filter[idx].SIDFE_0.reg));
+        _set_mode(dev->conf->can, MODE_INIT);
+        /* Reject all standard frames that are not matching the filters applied */
+        dev->conf->can->GFC.reg |= CAN_GFC_ANFS((uint32_t)CAN_REJECT);
+        _exit_init_mode(dev->conf->can);
+    }
+
+    return idx;
+}
+
+static int _remove_filter(candev_t *candev, const struct can_filter *filter)
+{
+    can_t *dev = container_of(candev, can_t, candev);
+
+    int16_t idx = 0;
+    if (filter->can_id & CAN_EFF_FLAG) {
+        idx = _find_filter(dev, filter, false);
+        if (idx != -1) {
+            DEBUG("Extended filter to disable at idx = %d\n", idx);
+            dev->msg_ram_conf.ext_filter[idx].XIDFE_0.bit.EFEC = CANDEV_SAMD5X_FILTER_DISABLE;
+        }
+        else {
+            DEBUG_PUTS("Filter not found");
+            return -1;
+        }
+    }
+    else {
+        idx = _find_filter(dev, filter, true);
+        if (idx != -1) {
+            DEBUG("Standard filter to disable at idx = %d\n", idx);
+            dev->msg_ram_conf.std_filter[idx].SIDFE_0.bit.SFEC = CANDEV_SAMD5X_FILTER_DISABLE;
+        }
+        else {
+            DEBUG_PUTS("Filter not found");
+            return -1;
+        }
+    }
+
+    return idx;
+}
+
+static int _set(candev_t *candev, canopt_t opt, void *value, size_t value_len)
+{
+    can_t *dev = container_of(candev, can_t, candev);
+    int res = 0;
+
+    switch (opt) {
+        case CANOPT_BITTIMING:
+            if (value_len < sizeof(struct can_bittiming)) {
+                return -1;
+            }
+            else {
+                memcpy(&candev->bittiming, value, sizeof(struct can_bittiming));
+                uint32_t clk_freq = sam0_gclk_freq(dev->conf->gclk_src);
+                can_device_calc_bittiming(clk_freq, &bittiming_const, &candev->bittiming);
+                res = _init(candev);
+                if (res == 0) {
+                    res = sizeof(candev->bittiming);
+                }
+                else {
+                    return -1;
+                }
+            }
+            break;
+        case CANOPT_RX_FILTERS:
+            if (value_len < sizeof(struct can_filter)) {
+                return -1;
+            }
+            else {
+                res = _set_filter(candev, value);
+                if (res >= 0) {
+                    res = sizeof(struct can_filter);
+                }
+                else {
+                    return -1;
+                }
+            }
+            break;
+        case CANOPT_STATE:
+            if (value_len < sizeof(canopt_state_t)) {
+                return -1;
+            }
+            else {
+                switch (*((canopt_state_t *)value)) {
+                    case CANOPT_STATE_OFF:
+                        res = _power_off(dev);
+                        if (res == 0) {
+                            res = sizeof(canopt_state_t);
+                        }
+                        else {
+                            return -1;
+                        }
+                        break;
+                    case CANOPT_STATE_ON:
+                        res = _power_on(dev);
+                        if (res == 0) {
+                            res = sizeof(canopt_state_t);
+                        }
+                        else {
+                            return -1;
+                        }
+                        break;
+                    case CANOPT_STATE_LOOPBACK:
+                        res = _set_mode(dev->conf->can, MODE_TEST);
+                        if (res == 0) {
+                            res = sizeof(canopt_state_t);
+                        }
+                        else {
+                            return -1;
+                        }
+                        break;
+                    default:
+                        break;
+                }
+            }
+        default:
+            break;
+    }
+
+    return res;
+}
+
+static void _isr(candev_t *candev)
+{
+    can_t *dev = container_of(candev, can_t, candev);
+
+    uint32_t irq_reg = dev->conf->can->IR.reg;
+    DEBUG("isr: IR reg = 0x%02lx\n", irq_reg);
+
+    /* Interrupt triggered due to reception of CAN frame on Rx_FIFO_0 */
+    if (irq_reg & CAN_IR_RF0N) {
+        DEBUG_PUTS("New message in Rx FIFO 0");
+        /* Clear the interrupt source flag */
+        dev->conf->can->IR.reg |= CAN_IR_RF0N;
+
+        uint16_t rx_get_idx = 0;
+        uint16_t rx_put_idx = 0;
+        rx_get_idx = (dev->conf->can->RXF0S.reg >> CAN_RXF0S_F0GI_Pos) & 0x3F;
+        DEBUG("rx get index = %u\n", rx_get_idx);
+        rx_put_idx = (dev->conf->can->RXF0S.reg >> CAN_RXF0S_F0PI_Pos) & 0x3F;
+        DEBUG("rx put index = %u\n", rx_put_idx);
+
+        struct can_frame frame_received = {0};
+        if (!dev->msg_ram_conf.rx_fifo_0[rx_get_idx].RXF0E_0.bit.XTD) {
+            DEBUG_PUTS("Received standard CAN frame");
+            frame_received.can_id = dev->msg_ram_conf.rx_fifo_0[rx_get_idx].RXF0E_0.bit.ID >> 18;
+        }
+        else {
+            DEBUG_PUTS("Received extended CAN frame");
+            frame_received.can_id = dev->msg_ram_conf.rx_fifo_0[rx_get_idx].RXF0E_0.bit.ID;
+        }
+        frame_received.can_dlc = dev->msg_ram_conf.rx_fifo_0[rx_get_idx].RXF0E_1.bit.DLC;
+        memcpy(frame_received.data, (uint32_t *)dev->msg_ram_conf.rx_fifo_0[rx_get_idx].RXF0E_DATA, frame_received.can_dlc);
+
+        dev->conf->can->RXF0A.reg = CAN_RXF0A_F0AI(rx_get_idx);
+        if (dev->candev.event_callback) {
+            dev->candev.event_callback(&(dev->candev), CANDEV_EVENT_RX_INDICATION, &frame_received);
+        }
+    }
+
+    /* Interrupt triggered due to reception of CAN frame on Rx_FIFO_1 */
+    if (irq_reg & CAN_IR_RF1N) {
+        DEBUG_PUTS("New message in Rx FIFO 1");
+        /* Clear the interrupt source flag */
+        dev->conf->can->IR.reg |= CAN_IR_RF1N;
+
+        uint16_t rx_get_idx = 0;
+        uint16_t rx_put_idx = 0;
+        rx_get_idx = (dev->conf->can->RXF1S.reg >> CAN_RXF1S_F1GI_Pos) & 0x3F;
+        DEBUG("rx get index = %u\n", rx_get_idx);
+        rx_put_idx = (dev->conf->can->RXF1S.reg >> CAN_RXF1S_F1PI_Pos) & 0x3F;
+        DEBUG("rx put index = %u\n", rx_put_idx);
+
+        struct can_frame frame_received = {0};
+        if (!dev->msg_ram_conf.rx_fifo_1[rx_get_idx].RXF1E_0.bit.XTD) {
+            DEBUG_PUTS("Received standard CAN frame");
+            frame_received.can_id = dev->msg_ram_conf.rx_fifo_1[rx_get_idx].RXF1E_0.bit.ID >> 18;
+        }
+        else {
+            DEBUG_PUTS("Received extended CAN frame");
+            frame_received.can_id = dev->msg_ram_conf.rx_fifo_1[rx_get_idx].RXF1E_0.bit.ID;
+        }
+        frame_received.can_dlc = dev->msg_ram_conf.rx_fifo_1[rx_get_idx].RXF1E_1.bit.DLC;
+        memcpy(frame_received.data, (uint32_t *)dev->msg_ram_conf.rx_fifo_1[rx_get_idx].RXF1E_DATA, frame_received.can_dlc);
+
+        dev->conf->can->RXF1A.reg = CAN_RXF1A_F1AI(rx_get_idx);
+        if (dev->candev.event_callback) {
+            dev->candev.event_callback(&(dev->candev), CANDEV_EVENT_RX_INDICATION, &frame_received);
+        }
+    }
+
+    /* Interrupt triggered due to new transmission event */
+    if (irq_reg & CAN_IR_TEFN) {
+        DEBUG_PUTS("New Tx event FIFO entry");
+        dev->conf->can->IR.reg |= CAN_IR_TEFN;
+        if (dev->candev.event_callback) {
+            dev->candev.event_callback(&(dev->candev), CANDEV_EVENT_TX_CONFIRMATION, NULL);
+        }
+    }
+
+    /* Enable the peripheral's interrupt */
+    if (dev->conf->can == CAN0) {
+        NVIC_EnableIRQ(CAN0_IRQn);
+    }
+    else {
+        NVIC_EnableIRQ(CAN1_IRQn);
+    }
+}
+
+#ifdef ISR_CAN0
+void ISR_CAN0(void)
+{
+    DEBUG_PUTS("ISR CAN0");
+
+    /* Disable the peripheral's interrupt to avoid potential 'interrupt bouncing' */
+    NVIC_DisableIRQ(CAN0_IRQn);
+    if (_can_0->candev.event_callback) {
+        _can_0->candev.event_callback(&(_can_0->candev), CANDEV_EVENT_ISR, NULL);
+    }
+}
+#endif
+
+#ifdef ISR_CAN1
+void ISR_CAN1(void)
+{
+    DEBUG_PUTS("ISR CAN1");
+
+    /* Disable the peripheral's interrupt to avoid potential 'interrupt bouncing' */
+    NVIC_DisableIRQ(CAN1_IRQn);
+    if (_can_1->candev.event_callback) {
+        _can_1->candev.event_callback(&(_can_1->candev), CANDEV_EVENT_ISR, NULL);
+    }
+
+}
+#endif
diff --git a/dist/tools/doccheck/exclude_simple b/dist/tools/doccheck/exclude_simple
index 17a1385840a9..121d11a15d9f 100644
--- a/dist/tools/doccheck/exclude_simple
+++ b/dist/tools/doccheck/exclude_simple
@@ -8460,3 +8460,4 @@ warning: Member LSM6DSL_REG_X_OFS_USR (macro definition) of file lsm6dsxx_intern
 warning: Member LSM6DSL_REG_Y_OFS_USR (macro definition) of file lsm6dsxx_internal.h is not documented.
 warning: Member LSM6DSL_REG_Z_OFS_USR (macro definition) of file lsm6dsxx_internal.h is not documented.
 warning: Member LSM6DS33_REG_ORIENT_CFG_G (macro definition) of file lsm6dsxx_internal.h is not documented.
+warning: Member AT6561_STBY_PIN (macro definition) of file board.h is not documented.
diff --git a/drivers/mcp2515/Makefile.dep b/drivers/mcp2515/Makefile.dep
index e034a1e4ce8b..6f5bb24591f6 100644
--- a/drivers/mcp2515/Makefile.dep
+++ b/drivers/mcp2515/Makefile.dep
@@ -1,2 +1,3 @@
 USEMODULE += ztimer_usec
+USEMODULE += can_rx_mailbox
 FEATURES_REQUIRED += periph_gpio periph_spi periph_gpio_irq
diff --git a/features.yaml b/features.yaml
index 4b979f21c5a4..a5ca87313263 100644
--- a/features.yaml
+++ b/features.yaml
@@ -651,6 +651,8 @@ groups:
     features:
     - name: periph_can
       help: A CAN peripheral is present.
+    - name: can_rx_mailbox
+      help: CAN controller RX mailbox is supported
     - name: periph_eth
       help: An Ethernet peripheral is present.
 
diff --git a/makefiles/features_existing.inc.mk b/makefiles/features_existing.inc.mk
index 5d4d7359cdab..85c42d685089 100644
--- a/makefiles/features_existing.inc.mk
+++ b/makefiles/features_existing.inc.mk
@@ -43,6 +43,7 @@ FEATURES_EXISTING := \
     ble_phy_2mbit \
     ble_phy_coded \
     bootloader_stm32 \
+    can_rx_mailbox \
     cortexm_fpu \
     cortexm_mpu \
     cortexm_svc \
diff --git a/makefiles/features_modules.inc.mk b/makefiles/features_modules.inc.mk
index 8b02fa96b2d2..a0a6d64ac54b 100644
--- a/makefiles/features_modules.inc.mk
+++ b/makefiles/features_modules.inc.mk
@@ -59,6 +59,9 @@ DEFAULT_MODULE += $(PERIPH_INIT_MODULES)
 # select cpu_check_address pseudomodule if the corresponding feature is used
 USEMODULE += $(filter cpu_check_address, $(FEATURES_USED))
 
+# select can_rx_mailbox pseudomodule if the corresponding feature is used
+USEMODULE += $(filter can_rx_mailbox, $(FEATURES_USED))
+
 # select bootloader_stm32 module if the feature is used
 USEMODULE += $(filter bootloader_stm32, $(FEATURES_USED))
 
diff --git a/makefiles/pseudomodules.inc.mk b/makefiles/pseudomodules.inc.mk
index 499459b07f9d..6b66fcca95ed 100644
--- a/makefiles/pseudomodules.inc.mk
+++ b/makefiles/pseudomodules.inc.mk
@@ -38,6 +38,7 @@ PSEUDOMODULES += arduino_serial_stdio
 PSEUDOMODULES += can_mbox
 PSEUDOMODULES += can_pm
 PSEUDOMODULES += can_raw
+PSEUDOMODULES += can_rx_mailbox
 PSEUDOMODULES += ccn-lite-utils
 PSEUDOMODULES += cc2538_rf_obs_sig
 PSEUDOMODULES += conn_can_isotp_multi
diff --git a/sys/auto_init/can/auto_init_periph_can.c b/sys/auto_init/can/auto_init_periph_can.c
index 8fa49fbdd1b9..b8314406818f 100644
--- a/sys/auto_init/can/auto_init_periph_can.c
+++ b/sys/auto_init/can/auto_init_periph_can.c
@@ -19,6 +19,7 @@
 #include "periph/can.h"
 #include "can/device.h"
 #include "can_params.h"
+#include "periph_conf.h"
 
 #define CANDEV_NUMOF (ARRAY_SIZE(candev_params))
 
diff --git a/sys/include/can/can.h b/sys/include/can/can.h
index 749e9a6f0b0e..b0974aa743fb 100644
--- a/sys/include/can/can.h
+++ b/sys/include/can/can.h
@@ -101,7 +101,7 @@ struct can_frame {
 struct can_filter {
     canid_t can_id;    /**< CAN ID */
     canid_t can_mask;  /**< Mask */
-#if defined(MODULE_MCP2515)
+#if (MODULE_CAN_RX_MAILBOX)
     uint8_t target_mailbox; /**< The mailbox to apply the filter to */
 #endif
 };
diff --git a/tests/drivers/candev/Makefile.board.dep b/tests/drivers/candev/Makefile.board.dep
index 46eda88fd426..25c7a1d8ffff 100644
--- a/tests/drivers/candev/Makefile.board.dep
+++ b/tests/drivers/candev/Makefile.board.dep
@@ -5,8 +5,16 @@ endif
 # define the CAN driver you want to use here
 CAN_DRIVER ?= MCP2515
 
+# define the CPU family used
+CPU_USED ?= SAME54
+
 ifeq ($(CAN_DRIVER), PERIPH_CAN)
   FEATURES_REQUIRED += periph_can
+  ifeq (SAME54, $(CPU_USED))
+    # You can increase the number of provided filters using this block. Default number : 3
+    # CFLAGS += "-DCANDEV_SAMD5X_DEFAULT_STD_FILTER_NUM=5"
+    # CFLAGS += "-DCANDEV_SAMD5X_DEFAULT_EXT_FILTER_NUM=5"
+  endif
 else ifeq ($(CAN_DRIVER), MCP2515)
   USEMODULE += mcp2515
   # Uncomment to enable MCP2515 reception filtering
diff --git a/tests/drivers/candev/main.c b/tests/drivers/candev/main.c
index e9f7f417372f..48f778813a97 100644
--- a/tests/drivers/candev/main.c
+++ b/tests/drivers/candev/main.c
@@ -33,6 +33,9 @@
 
 #include "periph/can.h"
 #include "can_params.h"
+#include "board.h"
+#include "periph_conf.h"
+#include "periph/gpio.h"
 
 static can_t periph_dev;
 
@@ -127,7 +130,86 @@ static int _receive(int argc, char **argv)
     return 0;
 }
 
+static int _set_bit_rate(int argc, char **argv)
+{
+    uint32_t bitrate = 250000;
+    uint32_t sample_point = 875;
+    int res = 0;
+
+    if (argc == 2) {
+        bitrate = atoi(argv[1]);
+        if (!bitrate) {
+            puts("Usage error: Invalid bitrate");
+            return -1;
+        }
+    }
+    if (argc == 3) {
+        bitrate = atoi(argv[1]);
+        sample_point = atoi(argv[2]);
+        if (!bitrate || !sample_point) {
+            puts("Usage error: Invalid bitrate or sample point");
+            return -2;
+        }
+    }
+
+    struct can_bittiming bit_timing = {
+        .bitrate = bitrate,
+        .sample_point = sample_point,
+    };
+
+    res = candev->driver->set(candev, CANOPT_BITTIMING, &bit_timing, sizeof(bit_timing));
+
+    return res;
+}
+
+static int _set_can_filter(int argc, char **argv)
+{
+    (void)argc;
+    (void)argv;
+    int res = 0;
+
+    struct can_filter filter = {
+        .can_mask = 0x7FF,
+        .can_id = 0x1aa,
+#if (MODULE_CAN_RX_MAILBOX)
+        .target_mailbox = 1,
+#endif
+    };
+
+    res = candev->driver->set(candev, CANOPT_RX_FILTERS, &filter, sizeof(struct can_filter));
+
+    return res;
+}
+
+static int _power_off(int argc, char **argv)
+{
+    (void)argc;
+    (void)argv;
+    int res = 0;
+
+    canopt_state_t state = CANOPT_STATE_OFF;
+    res = candev->driver->set(candev, CANOPT_STATE, &state, sizeof(canopt_state_t));
+
+    return res;
+}
+
+static int _power_on(int argc, char **argv)
+{
+    (void)argc;
+    (void)argv;
+    int res = 0;
+
+    canopt_state_t state = CANOPT_STATE_ON;
+    res = candev->driver->set(candev, CANOPT_STATE, &state, sizeof(canopt_state_t));
+
+    return res;
+}
+
 static const shell_command_t shell_commands[] = {
+    { "on", "Turn on the CAN controller", _power_on},
+    { "off", "Turn off the CAN controller", _power_off},
+    { "set_filter", "set CAN filters", _set_can_filter},
+    { "set_bit_rate", "set CAN bit rate", _set_bit_rate},
     { "send", "send some data", _send },
     { "receive", "receive some data", _receive },
     { NULL, NULL, NULL }
@@ -157,7 +239,7 @@ static void _can_event_callback(candev_t *dev, candev_event_t event, void *arg)
 
         frame = (struct can_frame *)arg;
 
-        DEBUG("            id: %" PRIx32 " dlc: %" PRIx8 " data: ", frame->can_id & 0x1FFFFFFF,
+        DEBUG("            id: %" PRIx32 " dlc: %u data: ", frame->can_id & 0x1FFFFFFF,
               frame->can_dlc);
         for (uint8_t i = 0; i < frame->can_dlc; i++) {
             DEBUG("0x%X ", frame->data[i]);
@@ -196,9 +278,13 @@ int main(void)
     isrpipe_init(&rxbuf, (uint8_t *)rx_ringbuf, sizeof(rx_ringbuf));
 #if IS_USED(MODULE_PERIPH_CAN)
     puts("Initializing CAN periph device");
-    can_init(&periph_dev, &(candev_conf[0]));    /* vcan0 on native */
-    candev = (candev_t *)&periph_dev;
-#elif  defined(MODULE_MCP2515)
+    can_init(&periph_dev, &(candev_conf[0]));
+    candev = &(periph_dev.candev);
+#if defined(BOARD_SAME54_XPRO)
+    gpio_init(AT6561_STBY_PIN, GPIO_OUT);
+    gpio_clear(AT6561_STBY_PIN);
+#endif
+#elif defined(MODULE_MCP2515)
     puts("Initializing MCP2515");
     candev_mcp2515_init(&mcp2515_dev, &candev_mcp2515_conf[0]);
     candev = (candev_t *)&mcp2515_dev;
@@ -221,34 +307,45 @@ if (IS_ACTIVE(CONFIG_USE_LOOPBACK_MODE)) {
     candev->driver->set(candev, CANOPT_STATE, &mode, sizeof(mode));
 }
 
+/* Depending from the CAN controller used, this test example will provide different results.
+- For MCP2515 standalone CAN controller, the last filter won't be applied
+as the first reception mailbox supports up to two filters
+- For SAMD5x/E5x CAN controller, and with keeping the default parameters in candev_samd5x.h,
+the last filter won't be applied as the CAN controller supports up to 3 standard filters
+- For SAMD5x/E5x CAN controller, if you increase the maximum capacity of the standard
+filters (check Makefile.board.dep), the last filter can be applied correctly. */
+#if defined(MODULE_MCP2515)
     if (IS_ACTIVE(MCP2515_RECV_FILTER_EN)) {
+#endif
         /* CAN filters examples */
         struct can_filter filter[4];
         filter[0].can_mask = 0x7FF;
         filter[0].can_id = 0x001;
-#if defined(MODULE_MCP2515)
-        filter[0].target_mailbox = 0;   /* messages with CAN ID 0x001 will be received in mailbox 0 */
+#if (MODULE_CAN_RX_MAILBOX)
+        filter[0].target_mailbox = 0;
 #endif
         filter[1].can_mask = 0x7FF;
         filter[1].can_id = 0x002;
-#if defined(MODULE_MCP2515)
-        filter[1].target_mailbox = 1;   /* messages with CAN ID 0x002 will be received in mailbox 1 */
+#if (MODULE_CAN_RX_MAILBOX)
+        filter[1].target_mailbox = 1;
 #endif
         filter[2].can_mask = 0x7FF;
         filter[2].can_id = 0x003;
-#if defined(MODULE_MCP2515)
-        filter[2].target_mailbox = 0;   /* messages with CAN ID 0x003 will be received in mailbox 0 */
+#if (MODULE_CAN_RX_MAILBOX)
+        filter[2].target_mailbox = 0;
 #endif
         filter[3].can_mask = 0x7FF;
         filter[3].can_id = 0x004;
-#if defined(MODULE_MCP2515)
-        filter[3].target_mailbox = 0;   /* this filter won't be applied. Reason is no space found in the first mailbox as it supports only two filters */
+#if (MODULE_CAN_RX_MAILBOX)
+        filter[3].target_mailbox = 1;
 #endif
         for (uint8_t i = 0; i < 4; i++) {
             candev->driver->set_filter(candev, &filter[i]);
         }
         /* All other messages won't be received */
+#if defined(MODULE_MCP2515)
     }
+#endif
 
     char line_buf[SHELL_DEFAULT_BUFSIZE];
     shell_run(shell_commands, line_buf, SHELL_DEFAULT_BUFSIZE);