Merge tag 'v4.19-rc6' into for-4.20/block

Merge -rc6 in, for two reasons:

1) Resolve a trivial conflict in the blk-mq-tag.c documentation
2) A few important regression fixes went into upstream directly, so
   they aren't in the 4.20 branch.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

* tag 'v4.19-rc6': (780 commits)
  Linux 4.19-rc6
  MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
  cpufreq: qcom-kryo: Fix section annotations
  perf/core: Add sanity check to deal with pinned event failure
  xen/blkfront: correct purging of persistent grants
  Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
  selftests/powerpc: Fix Makefiles for headers_install change
  blk-mq: I/O and timer unplugs are inverted in blktrace
  dax: Fix deadlock in dax_lock_mapping_entry()
  x86/boot: Fix kexec booting failure in the SEV bit detection code
  bcache: add separate workqueue for journal_write to avoid deadlock
  drm/amd/display: Fix Edid emulation for linux
  drm/amd/display: Fix Vega10 lightup on S3 resume
  drm/amdgpu: Fix vce work queue was not cancelled when suspend
  Revert "drm/panel: Add device_link from panel device to DRM device"
  xen/blkfront: When purging persistent grants, keep them in the buffer
  clocksource/drivers/timer-atmel-pit: Properly handle error cases
  block: fix deadline elevator drain for zoned block devices
  ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
  drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set
  ...

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Author: axboe

Documentation/ABI/stable/sysfs-devices-system-xen_memory

@@ -75,3 +75,12 @@ Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 Description:
 		Amount (in KiB) of low (or normal) memory in the
 		balloon.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/scrub_pages
+Date:		September 2018
+KernelVersion:	4.20
+Contact:	xen-devel@lists.xenproject.org
+Description:
+		Control scrubbing pages before returning them to Xen for others domains
+		use. Can be set with xen_scrub_pages cmdline
+		parameter. Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.

Documentation/admin-guide/kernel-parameters.txt

@@ -3523,6 +3523,12 @@
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
 			See Documentation/blockdev/ramdisk.txt.
 
+	random.trust_cpu={on,off}
+			[KNL] Enable or disable trusting the use of the
+			CPU's random number generator (if available) to
+			fully seed the kernel's CRNG. Default is controlled
+			by CONFIG_RANDOM_TRUST_CPU.
+
 	ras=option[,option,...]	[KNL] RAS-specific options
 
 		cec_disable	[X86]
@@ -4994,6 +5000,12 @@
 			Disables the PV optimizations forcing the HVM guest to
 			run as generic HVM guest with no PV drivers.
 
+	xen_scrub_pages=	[XEN]
+			Boolean option to control scrubbing pages before giving them back
+			to Xen, for use by other domains. Can be also changed at runtime
+			with /sys/devices/system/xen_memory/xen_memory0/scrub_pages.
+			Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
+
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]

Documentation/device-mapper/dm-raid.txt

@@ -348,3 +348,7 @@ Version History
 1.13.1  Fix deadlock caused by early md_stop_writes().  Also fix size an
 	state races.
 1.13.2  Fix raid redundancy validation and avoid keeping raid set frozen
+1.14.0  Fix reshape race on small devices.  Fix stripe adding reshape
+	deadlock/potential data corruption.  Update superblock when
+	specific devices are requested via rebuild.  Fix RAID leg
+	rebuild errors.

Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt

@@ -3,15 +3,14 @@
 Required properties:
 - compatible :
   - "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
-  - "fsl,imx8dv-lpi2c" for LPI2C compatible with the one integrated on i.MX8DV soc
 - reg : address and length of the lpi2c master registers
 - interrupts : lpi2c interrupt
 - clocks : lpi2c clock specifier
 
 Examples:
 
 lpi2c7: lpi2c7@40a50000 {
-	compatible = "fsl,imx8dv-lpi2c";
+	compatible = "fsl,imx7ulp-lpi2c";
 	reg = <0x40A50000 0x10000>;
 	interrupt-parent = <&intc>;
 	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/input/gpio-keys.txt

@@ -1,4 +1,4 @@
-Device-Tree bindings for input/gpio_keys.c keyboard driver
+Device-Tree bindings for input/keyboard/gpio_keys.c keyboard driver
 
 Required properties:
 	- compatible = "gpio-keys";

Documentation/devicetree/bindings/net/macb.txt

@@ -10,6 +10,7 @@ Required properties:
   Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
   the Cadence GEM, or the generic form: "cdns,gem".
   Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
+  Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs.
   Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
   Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
   Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.

Documentation/filesystems/vfs.txt

@@ -848,7 +848,7 @@ struct file_operations
 ----------------------
 
 This describes how the VFS can manipulate an open file. As of kernel
-4.1, the following members are defined:
+4.18, the following members are defined:
 
 struct file_operations {
 	struct module *owner;
@@ -858,11 +858,11 @@ struct file_operations {
 	ssize_t (*read_iter) (struct kiocb *, struct iov_iter *);
 	ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
 	int (*iterate) (struct file *, struct dir_context *);
+	int (*iterate_shared) (struct file *, struct dir_context *);
 	__poll_t (*poll) (struct file *, struct poll_table_struct *);
 	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
 	long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
 	int (*mmap) (struct file *, struct vm_area_struct *);
-	int (*mremap)(struct file *, struct vm_area_struct *);
 	int (*open) (struct inode *, struct file *);
 	int (*flush) (struct file *, fl_owner_t id);
 	int (*release) (struct inode *, struct file *);
@@ -882,6 +882,10 @@ struct file_operations {
 #ifndef CONFIG_MMU
 	unsigned (*mmap_capabilities)(struct file *);
 #endif
+	ssize_t (*copy_file_range)(struct file *, loff_t, struct file *, loff_t, size_t, unsigned int);
+	int (*clone_file_range)(struct file *, loff_t, struct file *, loff_t, u64);
+	int (*dedupe_file_range)(struct file *, loff_t, struct file *, loff_t, u64);
+	int (*fadvise)(struct file *, loff_t, loff_t, int);
 };
 
 Again, all methods are called without any locks being held, unless
@@ -899,6 +903,9 @@ otherwise noted.
 
   iterate: called when the VFS needs to read the directory contents
 
+  iterate_shared: called when the VFS needs to read the directory contents
+	when filesystem supports concurrent dir iterators
+
   poll: called by the VFS when a process wants to check if there is
 	activity on this file and (optionally) go to sleep until there
 	is activity. Called by the select(2) and poll(2) system calls
@@ -951,6 +958,16 @@ otherwise noted.
 
   fallocate: called by the VFS to preallocate blocks or punch a hole.
 
+  copy_file_range: called by the copy_file_range(2) system call.
+
+  clone_file_range: called by the ioctl(2) system call for FICLONERANGE and
+	FICLONE commands.
+
+  dedupe_file_range: called by the ioctl(2) system call for FIDEDUPERANGE
+	command.
+
+  fadvise: possibly called by the fadvise64() system call.
+
 Note that the file operations are implemented by the specific
 filesystem in which the inode resides. When opening a device node
 (character or block special) most filesystems will call special

Documentation/media/uapi/dvb/video_function_calls.rst

@@ -33,4 +33,3 @@ Video Function Calls
     video-clear-buffer
     video-set-streamtype
     video-set-format
-    video-set-attributes

Documentation/process/changes.rst

@@ -86,7 +86,7 @@ pkg-config
 
 The build system, as of 4.18, requires pkg-config to check for installed
 kconfig tools and to determine flags settings for use in
-'make {menu,n,g,x}config'.  Previously pkg-config was being used but not
+'make {g,x}config'.  Previously pkg-config was being used but not
 verified or documented.
 
 Flex

Documentation/process/code-of-conduct.rst

@@ -0,0 +1,81 @@
+Contributor Covenant Code of Conduct
+++++++++++++++++++++++++++++++++++++
+
+Our Pledge
+==========
+
+In the interest of fostering an open and welcoming environment, we as
+contributors and maintainers pledge to making participation in our project and
+our community a harassment-free experience for everyone, regardless of age, body
+size, disability, ethnicity, sex characteristics, gender identity and
+expression, level of experience, education, socio-economic status, nationality,
+personal appearance, race, religion, or sexual identity and orientation.
+
+Our Standards
+=============
+
+Examples of behavior that contributes to creating a positive environment
+include:
+
+* Using welcoming and inclusive language
+* Being respectful of differing viewpoints and experiences
+* Gracefully accepting constructive criticism
+* Focusing on what is best for the community
+* Showing empathy towards other community members
+
+
+Examples of unacceptable behavior by participants include:
+
+* The use of sexualized language or imagery and unwelcome sexual attention or
+  advances
+* Trolling, insulting/derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others’ private information, such as a physical or electronic
+  address, without explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+
+Our Responsibilities
+====================
+
+Maintainers are responsible for clarifying the standards of acceptable behavior
+and are expected to take appropriate and fair corrective action in response to
+any instances of unacceptable behavior.
+
+Maintainers have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, or to ban temporarily or permanently any
+contributor for other behaviors that they deem inappropriate, threatening,
+offensive, or harmful.
+
+Scope
+=====
+
+This Code of Conduct applies both within project spaces and in public spaces
+when an individual is representing the project or its community. Examples of
+representing a project or community include using an official project e-mail
+address, posting via an official social media account, or acting as an appointed
+representative at an online or offline event. Representation of a project may be
+further defined and clarified by project maintainers.
+
+Enforcement
+===========
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported by contacting the Technical Advisory Board (TAB) at
+<tab@lists.linux-foundation.org>. All complaints will be reviewed and
+investigated and will result in a response that is deemed necessary and
+appropriate to the circumstances. The TAB is obligated to maintain
+confidentiality with regard to the reporter of an incident.  Further details of
+specific enforcement policies may be posted separately.
+
+Maintainers who do not follow or enforce the Code of Conduct in good faith may
+face temporary or permanent repercussions as determined by other members of the
+project’s leadership.
+
+Attribution
+===========
+
+This Code of Conduct is adapted from the Contributor Covenant, version 1.4,
+available at https://www.contributor-covenant.org/version/1/4/code-of-conduct.html