Skip to content

deploy.md

Latest commit

 

History

History
67 lines (58 loc) · 2.2 KB

deploy.md

File metadata and controls

67 lines (58 loc) · 2.2 KB
Raw

Erebrus Deployment Docs

Build from Source

go build -ldflags "-X main.version=1.0.0 -X main.codeHash=$(git rev-parse HEAD)" -o erebrus

Install and Deploy using binary

  1. Make sure all setup were done
  2. Download the suitable binary for your operating system from here
  3. create a .env file in same directory and define the environment for erebrus . you can use template from .sample-env
  4. Run

Install and Deploy using Docker

  1. Make sure all setup were done
  2. Pull the ererbus docker image
docker pull network/erebrus:latest
  1. Run the Image
docker run -d -p 9080:9080/tcp -p 51820:51820/udp --cap-add=NET_ADMIN --cap-add=SYS_MODULE --sysctl="net.ipv4.conf.all.src_valid_mark=1" --sysctl="net.ipv6.conf.all.forwarding=1" \
-e LOAD_CONFIG_FILE="FALSE" \
-e RUNTYPE='debug' \
-e SERVER='0.0.0.0' \
-e GRPC_PORT='9080' \
-e WG_CONF_DIR='/etc/wireguard' \
-e WG_KEYS_DIR='/etc/wireguard/keys' \
-e WG_INTERFACE_NAME='wg0.conf' \
-e WG_ENDPOINT_HOST='your endpoint' \
-e WG_ENDPOINT_PORT='51820' \
-e WG_IPv4_SUBNET='10.0.0.1/24' \
-e WG_IPv6_SUBNET='fd9f:0000::10:0:0:1/64' \
-e WG_DNS='1.1.1.1' \
-e WG_ALLOWED_IP_1='0.0.0.0/0' \
-e WG_ALLOWED_IP_2='::/0' \
-e WG_PRE_UP='echo WireGuard PreUp' \
-e WG_POST_UP='iptables -A FORWARD -i %i -j ACCEPT; iptables -A FORWARD -o %i -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE' \
-e WG_PRE_DOWN='echo WireGuard PreDown' \
-e WG_POST_DOWN='iptables -D FORWARD -i %i -j ACCEPT; iptables -D FORWARD -o %i -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE' \
--restart unless-stopped \
--name erebrus-region \
erebrus

or

docker run -d -p 9080:9080/tcp -p 51820:51820/udp --cap-add=NET_ADMIN --cap-add=SYS_MODULE --sysctl="net.ipv4.conf.all.src_valid_mark=1" --sysctl="net.ipv6.conf.all.forwarding=1" --restart unless-stopped -v /home/ubuntu/erebrus/wireguard/:/etc/wireguard/ --name erebrus --env-file .env ghcr.io/netsepio/erebrus:main
  1. Use the following commands
docker exec -it erebrus bash

sudo netstat -pna | grep 51820

sudo lsof -i -P -n | grep 51820

docker rm -f $(docker ps -aq)