-
-
Notifications
You must be signed in to change notification settings - Fork 19.2k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
[BUG] SD card is not reading #24712
Comments
Disabled by default... Configuration.h
|
I tried both of them differently. nothing has changed, the problem persists. |
Provided Config does not compile
Updated to current bugfix configs and added Z2 pins |
First issue I see
So there is a conflict with PS_ON_PIN and Z2_SERIAL_RX_PIN that needs resolved. |
no sd detect pin either |
Odd behavior during testing, with the MKS H43 Adapter-A connected and the SD_DETECT_PIN defined If you disable DGUS_LCD_UI_MKS and enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER But when you enable DGUS_LCD_UI_MKS and disable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER If your connected via serial and insert a sdcard the controller seem to do a partial reboot and then flashes the led (pin 13) forever. |
It seem to be a memory issue... to many things enabled on old mega2560 with only 4k |
YES, I have the same issue. I have the Creality Ender 3 Max with BTT Octopus Pro F429 board. I enabled SDSUPPORT and CRC check. The SDCARD was working in 2.0.x. My BTT BOARD uploaded and installed the 2.1.2 Firmware file just fine. Once or twice I get the message Initialization fail. For the SDCARD. |
HI for at least my issue where SDCARD was not detected/working in Marlin 2.1.2. I had to add the line #define SDCARD_CONNECTION ONBOARD to the Configuration.adv file. Apparently, This line was left out. Now everything is working. |
Not working for me too. Hardware: Kingroon K3PS/Robin nano board, BLTouch |
I am also facing the same issue now, suddenly !!!, was working fine before, in 2.1.2.1 branch, It had another issue of stopping print intermediately without any reason.
All commands sent from serial port directly works fine, Hardware: Ramps 1.4, Mega 2560 |
Same beaviour, everything perfect and fully working but the SD reader. Files appears I select one and it doesn't print. When I go back to media the files disappear. If I extract and insert again the SD card they appeat again but still no printing. Tryed both 2.1.2.1 and 2.1.2. I saw around 2.1.2 firmwares fully working. So I think it's only a misconfiguration. |
I had the same issue, fixed by uncommenting those if you are using the lcd sdcard slot, |
Did you test the latest
bugfix-2.1.x
code?Yes, and the problem still exists.
Bug Description
SD card is not reading.
my system
Mks Gen L v2.1
Mks H43 Display
Mks H43 Adapter
Mks PWC v3.0
Bug Timeline
a new error, it does not read the card in any way.
Expected behavior
As soon as the printer is turned on, the contents of the sd card should appear, but the files are not visible. There is no such problem in the previous version. Marlin-V2.X-MKS-H43-main
Actual behavior
No response
Steps to Reproduce
No response
Version of Marlin Firmware
Marlin-2.1.1
Printer model
Corexy
Electronics
Mks gen L 2.1 , Mks Pwc, Mks H43 LCD, bltouch, h43 a adapter
Add-ons
No response
Bed Leveling
ABL Bilinear mesh
Your Slicer
Prusa Slicer
Host Software
SD Card (headless)
Don't forget to include
Configuration.h
andConfiguration_adv.h
.Additional information & file uploads
Marlin.zip
The text was updated successfully, but these errors were encountered: