HomeKit Accessory Protocol implementation in python 3 (tested with 3.4, 3.5 and 3.6). With this project, you can integrate your own accessories and add them to your iOS Home app. Since Siri is integrated with the Home app, you can start voice-control your accessories right away - e.g. "What is the temperature in my bedroom." and "Turn on the lights in the Dining Room."
The project was developed for a Raspberry Pi, but it should work on other platforms. You
can even integrate with HAP-python remotely using HTTP (see below). To kick-start things,
you can open main.py, where you can find out how to launch a mock temperature sensor.
Just run python3 main.py and you should see it in the Home app (be sure to be in the same network).
Stop it by hitting Ctrl+C.
There are example accessories in the accessories folder:
- AM2302 (DHT22) temperature and humidity sensor.
- SDS011 air particulate density sensor.
- TSL2591 light sensor.
It's very easy to add your own.
- API
- Installation
- Integrating non-compatible devices
- Run at boot (and a Switch to shutdown your device)
- Notice
As a prerequisite, you will need Avahi/Bonjour installed (due to zeroconf package). On a Raspberry Pi, you can get it with:
$ sudo apt-get install libavahi-compat-libdnssd-dev
avahi-utils may also fit the bill. Then, you can install with pip3 (you will need sudo or --user for the install):
$ pip3 install HAP-pythonThis will install HAP-python in your python packages, so that you can import it as pyhap. To uninstall, just do:
$ pip3 uninstall HAP-python
A typical flow for using HAP-python starts with implementing an Accessory. This is done by subclassing Accessory and putting in place a few details (see below). After that, you give your accessory to an AccessoryDriver to manage. This will take care of advertising it on the local network, setting a HAP server and running the Accessory. Take a look at main.py for a quick start on that.
from pyhap.accessory import Accessory, AsyncAccessory, Category
import pyhap.loader as loader
### Async accessory - run method is run asynchronously in the event loop
class TemperatureSensor(AsyncAccessory):
"""Implementation of a mock temperature sensor accessory."""
category = Category.SENSOR # This is for the icon in the iOS Home app.
def __init__(self, *args, **kwargs):
"""Here, we just store a reference to the current temperature characteristic and
add a method that will be executed every time its value changes.
"""
# If overriding this method, be sure to call the super's implementation first,
# because it calls _set_services and performs some other important actions.
super(TemperatureSensor, self).__init__(*args, **kwargs)
self.temp_char = self.get_service("TemperatureSensor")\
.get_characteristic("CurrentTemperature")
# Having a callback is optional, but you can use it to add functionality.
self.temp_char.setter_callback = self.temperature_changed
def temperature_changed(self, value):
"""This will be called every time the value of the CurrentTemperature Characteristic
is changed. Use setter_callbacks to react to user actions, e.g. setting the
lights On could fire some GPIO code to turn on a LED (see pyhap/accessories/LightBulb.py).
NOTE: no need to set the value yourself, this is done for you, before the callback
is called.
"""
print("Temperature changed to: ", value)
def _set_services(self):
"""We override this method to add the services that we want our accessory to
support. Services have "mandatory" characteristics and optional
characteristics. Mandatory characteristics are automatically added
to your selected service, but you must add optional characteristics yourself.
Take a look at pyhap/accessories/FakeFan.py for an example of how to do that.
"""
super(TemperatureSensor, self)._set_services() # Adds some neccessary characteristics.
# A loader creates Service and Characteristic objects based on json representation
# such as the Apple-defined ones in pyhap/resources/.
temp_sensor_service = loader.get_serv_loader().get("TemperatureSensor")
self.add_service(temp_sensor_service)
@AsyncAcessory.run_at_interval(3) # Run this method every 3 seconds
async def run(self):
"""We override this method to implement what the accessory will do when it is
started. An accessory is started and stopped from the AccessoryDriver.
We set the current temperature to a random number. The decorator runs this method
every 3 seconds.
"""
self.temp_char.set_value(random.randint(18, 26))
def stop(self):
"""We override this method to clean up any resources or perform final actions, as
this is called by the AccessoryDriver when the Accessory is being stopped.
"""
print("Stopping accessory.")
### Synchronouse accessory - run method is in a thread
class SyncTemperatureSensor(Accessory):
"""Everything is same as in the TemperatureSensor, apart from the run method which is
not async.
"""
@Accessory.run_at_interval(3)
def run(self):
self.temp_char.set_value(random.randint(18, 26))HAP-python may not be available for many IoT devices. For them, HAP-python allows devices to be bridged by means of communicating with an HTTP server - the HttpBridge. You can add as many remote accessories as you like.
For example, the bellow snippet creates an Http Accessory that listens on port 51800 for updates on the TemperatureSensor service:
import pyhap.util as util
import pyhap.loader as loader
from pyhap.accessories.Http import HttpBridge
from pyhap.accessory import Accessory
from pyhap.accessory_driver import AccessoryDriver
# get loaders
service_loader = loader.get_serv_loader()
char_loader = loader.get_char_loader()
# Create an accessory with the temperature sensor service.
# Also, add an optional characteristic StatusLowBattery to that service.
remote_accessory = Accessory("foo", aid=2)
tservice = service_loader.get("TemperatureSensor")
tservice.add_opt_characteristic(
char_loader.get("StatusLowBattery"))
remote_accessory.add_service(tservice)
# Create the HTTP Bridge and add the accessory to it.
address = ("", 51111)
http_bridge = HttpBridge(address=address,
display_name="HTTP Bridge",
pincode=b"203-23-999")
http_bridge.add_accessory(remote_accessory)
# Add to driver and run.
driver = AccessoryDriver(http_bridge, 51826)
driver.start()Now, remote accessories can do an HTTP POST to the address of the device where the accessory is running (port 51111) with the following content:
{
"aid": 2,
"services": {
"TemperatureSensor": {
"CurrentTemperature" : 20,
"StatusLowBattery": true,
}
}
}This will update the value of the characteristic "CurrentTemperature" to 20 degrees C
and "StatusLowBattery" to true.
Needless to say the communication to the Http Bridge poses a security risk, so
keep that in mind.
This is a quick way to get HAP-python to run at boot on a Raspberry Pi. It is recommended
to turn on "Wait for network" in raspi-config. If this turns to be unreliable, see
this.
Copy the below in /etc/systemd/system/HAP-python.service (needs sudo).
[Unit]
Description = HAP-python daemon
Wants = pigpiod.service # Remove this if you don't depend on pigpiod
After = local-fs.target network-online.target pigpiod.service
[Service]
User = lesserdaemon # It's a good idea to use some unprivileged system user
# Script starting HAP-python, e.g. main.py
# Be careful to set any paths you use, e.g. for persisting the state.
ExecStart = /usr/bin/python3 /home/lesserdaemon/.hap-python/hap-python.py
[Install]
WantedBy = multi-user.target
Test that everything is fine by doing:
> sudo systemctl start HAP-python
> systemctl status HAP-python
> sudo journalctl -u HAP-python # to see the output of the start up script.
> sudo systemctl stop HAP-pythonTo enable or disable at boot, do:
> sudo systemctl enable HAP-python
> sudo systemctl disable HAP-pythonIf you are running HAP-python on a Raspberry Pi, you may want to add a
Shutdown Switch to your Home. This is a
Switch Accessory, which, when triggered, executes sudo shutdown -h now, i.e.
it shutdowns and halts the Pi. This allows you to safely unplug it.
For the above to work, you need to enable passwordless /sbin/shutdown to whichever
user is running HAP-python. For example, do:
$ sudo visudo # and add the line: "<hap-user> ALL=NOPASSWD: /sbin/shutdown".Some HAP know-how was taken from HAP-NodeJS by KhaosT.
I am not aware of any bugs, but I am more than confident that such exist. If you find any, please report and I will try to fix them.
Suggestions are always welcome.
Have fun!