Some usefull parts for Elegoo Mars 3 MSLA printer.
Some SVG and STL files i created in Inkscape and Rhino 7 for my Elegoo Mars 3 printer.
I had an damaged Resin tank which leads to a dirty LCD-Screen protector film. When i tried to remove the hardend resin, i broke the protector film and had also renew the black gasket around the LCD. Hard to find this part. You can buy a new LCD Screen which is delivered with a new gasket. But the LCD itself was OK.
Since i bought an Cameo 4 plotter, i decided to cut my own gasket. I use a standard Vinyl foil. You can also use a better quality foil used for automotiv stuff. The original one has a thickness of 0,11 mm (both, the gasket and the FEP film).
To make things easy, i made this additional Screen Protector under the VAT and a Seal to prevent Resin running under the the Protector foil. I cut both with the Silhouette Cameo 4 plotter. The Seal foil should as thin as possible.
My Mercury 2in1 washer/curer has only a metal box inside. Maybe there is a pro Version which has also a Build-Plate holder. The downside of this holder is, you can't close the sealed tank. You have to wash your parts with the tank open.
I created my own Build-Plate holder. It has a magnet on top I placed another magnet (both 20x3 mm Neodym-Magnets) on top of the tank cover. Works great.
45° Drip holder for Elegoo Mars 3 Build-Plate.
On Thingyverse i found some VAT cleaners but not for the special Mars 3 VAT and my personally needs. I got a cheap mobile Drill-Stand with a 42 mm diameter hole. The VAT cleaner should fit to this Drill-Stand. So i created my own one that fit's and prevent the VAT from falling off. There is a 20 mm channel where i can place a metal filter mesh. I found cheap 20 mm stainless steel strainer used in (smoke) pipes. Works pretty well. I printed it with cheap ABS-like Resin on the Mars 3.
I use the Elegoo Mercury Plus 2.0 washer/currer combo. The washer has 3,5 l volume. To clean the IPA and reuse it, i got another sealed 5 l Box. I use a cheap manual fuel pump to put the IPA from the washer tank to the 5 l tank that i put outside in the sun for about 2 week. I created this two filters for the pump to prevent pumping Resin residue from the washer tank and later from 5 l tank back into bottles. I printed it with cheap ABS-like Resin on the Mars 3.
