diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp
index 08adb65134d1..740e0538bf6a 100644
--- a/Marlin/src/MarlinCore.cpp
+++ b/Marlin/src/MarlinCore.cpp
@@ -276,7 +276,7 @@ bool wait_for_heatup = false;
 
 // For M0/M1, this flag may be cleared (by M108) to exit the wait-for-user loop
 #if HAS_RESUME_CONTINUE
-  bool wait_for_user; // = false;
+  bool wait_for_user; // = false
 
   void wait_for_user_response(millis_t ms/*=0*/, const bool no_sleep/*=false*/) {
     UNUSED(no_sleep);
diff --git a/Marlin/src/feature/filwidth.cpp b/Marlin/src/feature/filwidth.cpp
index 3befd7752a6e..1142423cf77a 100644
--- a/Marlin/src/feature/filwidth.cpp
+++ b/Marlin/src/feature/filwidth.cpp
@@ -28,7 +28,7 @@
 
 FilamentWidthSensor filwidth;
 
-bool FilamentWidthSensor::enabled; // = false;                          // (M405-M406) Filament Width Sensor ON/OFF.
+bool FilamentWidthSensor::enabled; // = false                           // (M405-M406) Filament Width Sensor ON/OFF.
 uint32_t FilamentWidthSensor::accum; // = 0                             // ADC accumulator
 uint16_t FilamentWidthSensor::raw; // = 0                               // Measured filament diameter - one extruder only
 float FilamentWidthSensor::nominal_mm = DEFAULT_NOMINAL_FILAMENT_DIA,   // (M104) Nominal filament width
diff --git a/Marlin/src/feature/joystick.cpp b/Marlin/src/feature/joystick.cpp
index acab5d7437a2..29addfcf1eba 100644
--- a/Marlin/src/feature/joystick.cpp
+++ b/Marlin/src/feature/joystick.cpp
@@ -123,7 +123,7 @@ Joystick joystick;
 
   void Joystick::inject_jog_moves() {
     // Recursion barrier
-    static bool injecting_now; // = false;
+    static bool injecting_now; // = false
     if (injecting_now) return;
 
     #if ENABLED(NO_MOTION_BEFORE_HOMING)
diff --git a/Marlin/src/lcd/extui/dgus/DGUSDisplay.cpp b/Marlin/src/lcd/extui/dgus/DGUSDisplay.cpp
index 8e54b20d99a1..074dad96c29d 100644
--- a/Marlin/src/lcd/extui/dgus/DGUSDisplay.cpp
+++ b/Marlin/src/lcd/extui/dgus/DGUSDisplay.cpp
@@ -60,7 +60,7 @@ constexpr uint8_t DGUS_CMD_WRITEVAR = 0x82;
 constexpr uint8_t DGUS_CMD_READVAR = 0x83;
 
 #if ENABLED(DEBUG_DGUSLCD)
-  bool dguslcd_local_debug; // = false;
+  bool dguslcd_local_debug; // = false
 #endif
 
 void DGUSDisplay::initDisplay() {
diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp
index bdf99b0ed5d9..c4502673fc46 100644
--- a/Marlin/src/module/motion.cpp
+++ b/Marlin/src/module/motion.cpp
@@ -78,7 +78,7 @@
 #endif
 
 // Relative Mode. Enable with G91, disable with G90.
-bool relative_mode; // = false;
+bool relative_mode; // = false
 
 /**
  * Cartesian Current Position
diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp
index 3df24ce31307..1667cc457f1e 100644
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@@ -938,10 +938,15 @@ float Probe::run_z_probe(const bool sanity_check/*=true*/, const_float_t z_min_p
  * with the previously active tool.
  *
  */
-float Probe::probe_at_point(const_float_t rx, const_float_t ry, const ProbePtRaise raise_after/*=PROBE_PT_NONE*/,
-  const uint8_t verbose_level/*=0*/, const bool probe_relative/*=true*/, const bool sanity_check/*=true*/,
-  const_float_t z_min_point/*=Z_PROBE_LOW_POINT*/, const_float_t z_clearance/*=Z_TWEEN_SAFE_CLEARANCE*/,
-  const bool raise_after_is_relative/*=false*/
+float Probe::probe_at_point(
+  const_float_t rx, const_float_t ry,
+  const ProbePtRaise raise_after,     // = PROBE_PT_NONE
+  const uint8_t verbose_level,        // = 0
+  const bool probe_relative,          // = true
+  const bool sanity_check,            // = true
+  const_float_t z_min_point,          // = Z_PROBE_LOW_POINT
+  const_float_t z_clearance,          // = Z_TWEEN_SAFE_CLEARANCE
+  const bool raise_after_is_relative  // = false
 ) {
   DEBUG_SECTION(log_probe, "Probe::probe_at_point", DEBUGGING(LEVELING));
 
diff --git a/Marlin/src/module/probe.h b/Marlin/src/module/probe.h
index 81b5ec6e02b6..58225f3e5288 100644
--- a/Marlin/src/module/probe.h
+++ b/Marlin/src/module/probe.h
@@ -171,15 +171,27 @@ class Probe {
 
     #endif // !IS_KINEMATIC
 
-    static float probe_at_point(const_float_t rx, const_float_t ry, const ProbePtRaise raise_after=PROBE_PT_NONE,
-      const uint8_t verbose_level=0, const bool probe_relative=true, const bool sanity_check=true,
-      const_float_t z_min_point=Z_PROBE_LOW_POINT, const_float_t z_clearance=Z_TWEEN_SAFE_CLEARANCE,
-      const bool raise_after_is_relative=false);
-
-    static float probe_at_point(const xy_pos_t &pos, const ProbePtRaise raise_after=PROBE_PT_NONE,
-      const uint8_t verbose_level=0, const bool probe_relative=true, const bool sanity_check=true,
-      const_float_t z_min_point=Z_PROBE_LOW_POINT, float z_clearance=Z_TWEEN_SAFE_CLEARANCE,
-      const bool raise_after_is_relative=false
+    static float probe_at_point(
+      const_float_t      rx,
+      const_float_t      ry,
+      const ProbePtRaise raise_after        = PROBE_PT_NONE,
+      const uint8_t      verbose_level      = 0,
+      const bool         probe_relative     = true,
+      const bool         sanity_check       = true,
+      const_float_t      z_min_point        = Z_PROBE_LOW_POINT,
+      const_float_t      z_clearance        = Z_TWEEN_SAFE_CLEARANCE,
+      const bool         raise_after_is_rel = false
+    );
+
+    static float probe_at_point(
+      const xy_pos_t     &pos,
+      const ProbePtRaise raise_after        = PROBE_PT_NONE,
+      const uint8_t      verbose_level      = 0,
+      const bool         probe_relative     = true,
+      const bool         sanity_check       = true,
+      const_float_t      z_min_point        = Z_PROBE_LOW_POINT,
+      const_float_t      z_clearance        = Z_TWEEN_SAFE_CLEARANCE,
+      const bool         raise_after_is_rel = false
     ) {
       return probe_at_point(pos.x, pos.y, raise_after, verbose_level, probe_relative, sanity_check, z_min_point, z_clearance, raise_after_is_relative);
     }
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index 0290b50dd071..5c11df2c6a27 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -459,7 +459,7 @@ PGMSTR(str_t_heating_failed, STR_T_HEATING_FAILED);
   #endif
 
   #if ANY(PROBING_FANS_OFF, ADVANCED_PAUSE_FANS_PAUSE)
-    bool Temperature::fans_paused; // = false;
+    bool Temperature::fans_paused; // = false
     uint8_t Temperature::saved_fan_speed[FAN_COUNT] = ARRAY_N_1(FAN_COUNT, FAN_OFF_PWM);
   #endif
 
@@ -1954,7 +1954,7 @@ void Temperature::mintemp_error(const heater_id_t heater_id OPTARG(ERR_INCLUDE_T
     #endif
 
     #if ANY(CHAMBER_FAN, CHAMBER_VENT) || DISABLED(PIDTEMPCHAMBER)
-      static bool flag_chamber_excess_heat; // = false;
+      static bool flag_chamber_excess_heat; // = false
     #endif
 
     #if ANY(CHAMBER_FAN, CHAMBER_VENT)