Update 5.4-1.0.0-imx to v5.4.62 from stable #122
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit 0828137 upstream. __init_FSCR() was added originally in commit 2468dcf ("powerpc: Add support for context switching the TAR register") (Feb 2013), and only set FSCR_TAR. At that point FSCR (Facility Status and Control Register) was not context switched, so the setting was permanent after boot. Later we added initialisation of FSCR_DSCR to __init_FSCR(), in commit 54c9b22 ("powerpc: Set DSCR bit in FSCR setup") (Mar 2013), again that was permanent after boot. Then commit 2517617 ("powerpc: Fix context switch DSCR on POWER8") (Aug 2013) added a limited context switch of FSCR, just the FSCR_DSCR bit was context switched based on thread.dscr_inherit. That commit said "This clears the H/FSCR DSCR bit initially", but it didn't, it left the initialisation of FSCR_DSCR in __init_FSCR(). However the initial context switch from init_task to pid 1 would clear FSCR_DSCR because thread.dscr_inherit was 0. That commit also introduced the requirement that FSCR_DSCR be clear for user processes, so that we can take the facility unavailable interrupt in order to manage dscr_inherit. Then in commit 152d523 ("powerpc: Create context switch helpers save_sprs() and restore_sprs()") (Dec 2015) FSCR was added to thread_struct. However it still wasn't fully context switched, we just took the existing value and set FSCR_DSCR if the new thread had dscr_inherit set. FSCR was still initialised at boot to FSCR_DSCR | FSCR_TAR, but that value was not propagated into the thread_struct, so the initial context switch set FSCR_DSCR back to 0. Finally commit b57bd2d ("powerpc: Improve FSCR init and context switching") (Jun 2016) added a full context switch of the FSCR, and added an initialisation of init_task.thread.fscr to FSCR_TAR | FSCR_EBB, but omitted FSCR_DSCR. The end result is that swapper runs with FSCR_DSCR set because of the initialisation in __init_FSCR(), but no other processes do, they use the value from init_task.thread.fscr. Having FSCR_DSCR set for swapper allows it to access SPR 3 from userspace, but swapper never runs userspace, so it has no useful effect. It's also confusing to have the value initialised in two places to two different values. So remove FSCR_DSCR from __init_FSCR(), this at least gets us to the point where there's a single value of FSCR, even if it's still set in two places. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Alistair Popple <alistair@popple.id.au> Link: https://lore.kernel.org/r/20200527145843.2761782-1-mpe@ellerman.id.au Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2217b98 upstream. binfmt_flat loader uses the gap between text and data to store data segment pointers for the libraries. Even in the absence of shared libraries it stores at least one pointer to the executable's own data segment. Text and data can go back to back in the flat binary image and without offsetting data segment last few instructions in the text segment may get corrupted by the data segment pointer. Fix it by reverting commit a235722 ("binfmt_flat: don't offset the data start"). Cc: stable@vger.kernel.org Fixes: a235722 ("binfmt_flat: don't offset the data start") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 272502f ] When receiving an IPv4 packet inside an IPv6 GRE packet, and the IP6_TNL_F_RCV_DSCP_COPY flag is set on the tunnel, the IPv4 header would get corrupted. This is due to the common ip6_tnl_rcv() function assuming that the inner header is always IPv6. This patch checks the tunnel protocol for IPv4 inner packets, but still defaults to IPv6. Fixes: 308edfd ("gre6: Cleanup GREv6 receive path, call common GRE functions") Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 55eff0e ] We may access the two bytes after vlan_hdr in vlan_set_encap_proto(). So we should pull VLAN_HLEN + sizeof(unsigned short) in skb_vlan_untag() or we may access the wrong data. Fixes: 0d5501c ("net: Always untag vlan-tagged traffic on input.") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eeaac36 ] Currently the nexthop code will use an empty NHA_GROUP attribute, but it requires at least 1 entry in order to function properly. Otherwise we end up derefencing null or random pointers all over the place due to not having any nh_grp_entry members allocated, nexthop code relies on having at least the first member present. Empty NHA_GROUP doesn't make any sense so just disallow it. Also add a WARN_ON for any future users of nexthop_create_group(). BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [Freescale#1] SMP CPU: 0 PID: 558 Comm: ip Not tainted 5.9.0-rc1+ Freescale#93 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:fib_check_nexthop+0x4a/0xaa Code: 0f 84 83 00 00 00 48 c7 02 80 03 f7 81 c3 40 80 fe fe 75 12 b8 ea ff ff ff 48 85 d2 74 6b 48 c7 02 40 03 f7 81 c3 48 8b 40 10 <48> 8b 80 80 00 00 00 eb 36 80 78 1a 00 74 12 b8 ea ff ff ff 48 85 RSP: 0018:ffff88807983ba00 EFLAGS: 00010213 RAX: 0000000000000000 RBX: ffff88807983bc00 RCX: 0000000000000000 RDX: ffff88807983bc00 RSI: 0000000000000000 RDI: ffff88807bdd0a80 RBP: ffff88807983baf8 R08: 0000000000000dc0 R09: 000000000000040a R10: 0000000000000000 R11: ffff88807bdd0ae8 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88807bea3100 R15: 0000000000000001 FS: 00007f10db393700(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 000000007bd0f004 CR4: 00000000003706f0 Call Trace: fib_create_info+0x64d/0xaf7 fib_table_insert+0xf6/0x581 ? __vma_adjust+0x3b6/0x4d4 inet_rtm_newroute+0x56/0x70 rtnetlink_rcv_msg+0x1e3/0x20d ? rtnl_calcit.isra.0+0xb8/0xb8 netlink_rcv_skb+0x5b/0xac netlink_unicast+0xfa/0x17b netlink_sendmsg+0x334/0x353 sock_sendmsg_nosec+0xf/0x3f ____sys_sendmsg+0x1a0/0x1fc ? copy_msghdr_from_user+0x4c/0x61 ___sys_sendmsg+0x63/0x84 ? handle_mm_fault+0xa39/0x11b5 ? sockfd_lookup_light+0x72/0x9a __sys_sendmsg+0x50/0x6e do_syscall_64+0x54/0xbe entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f10dacc0bb7 Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 8b 05 9a 4b 2b 00 85 c0 75 2e 48 63 ff 48 63 d2 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 b1 f2 2a 00 f7 d8 64 89 02 48 RSP: 002b:00007ffcbe628bf8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffcbe628f80 RCX: 00007f10dacc0bb7 RDX: 0000000000000000 RSI: 00007ffcbe628c60 RDI: 0000000000000003 RBP: 000000005f41099c R08: 0000000000000001 R09: 0000000000000008 R10: 00000000000005e9 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007ffcbe628d70 R15: 0000563a86c6e440 Modules linked in: CR2: 0000000000000080 CC: David Ahern <dsahern@gmail.com> Fixes: 430a049 ("nexthop: Add support for nexthop groups") Reported-by: syzbot+a61aa19b0c14c8770bd9@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8dfddfb ] Passing large uint32 sockaddr_qrtr.port numbers for port allocation triggers a warning within idr_alloc() since the port number is cast to int, and thus interpreted as a negative number. This leads to the rejection of such valid port numbers in qrtr_port_assign() as idr_alloc() fails. To avoid the problem, switch to idr_alloc_u32() instead. Fixes: bdabad3 ("net: Add Qualcomm IPC router") Reported-by: syzbot+f31428628ef672716ea8@syzkaller.appspotmail.com Signed-off-by: Necip Fazil Yildiran <necip@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ab921f3 ] The number of output and input streams was never being reduced, eg when processing received INIT or INIT_ACK chunks. The effect is that DATA chunks can be sent with invalid stream ids and then discarded by the remote system. Fixes: 2075e50 ("sctp: convert to genradix") Signed-off-by: David Laight <david.laight@aculab.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ce51f63 ] __smc_diag_dump() is potentially copying uninitialized kernel stack memory into socket buffers, since the compiler may leave a 4-byte hole near the beginning of `struct smcd_diag_dmbinfo`. Fix it by initializing `dinfo` with memset(). Fixes: 4b1b7d3 ("net/smc: add SMC-D diag support") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 47733f9 ] __tipc_nl_compat_dumpit() has two callers, and it expects them to pass a valid nlmsghdr via arg->data. This header is artificial and crafted just for __tipc_nl_compat_dumpit(). tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well as some nested attribute, TIPC_NLA_SOCK. But the other caller tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized on this call path. Fix this by just adding a similar nlmsghdr without any payload in tipc_nl_compat_dumpit(). This bug exists since day 1, but the recent commit 6ea6776 ("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it easier to appear. Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com Fixes: d0796d1 ("tipc: convert legacy nl bearer dump to nl compat") Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ccd143e ] Most statistics in ena driver are incremented, meaning that a stat's value is a sum of all increases done to it since driver/queue initialization. This patch makes all statistics this way, effectively making missed_tx statistic incremental. Also added a comment regarding rx_drops and tx_drops to make it clearer how these counters are calculated. Fixes: 11095fd ("net: ena: add statistics for missed tx packets") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…rror flow [ Upstream commit eda814b ] tcf_ct_handle_fragments() shouldn't free the skb when ip_defrag() call fails. Otherwise, we will cause a double-free bug. In such cases, just return the error to the caller. Fixes: b57dc7c ("net/sched: Introduce action ct") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d0f5c70 ] Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose NETIF_F_LLTX feature because of the incorrect handling of features in ipvlan_fix_features(). --before-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Actual changes: vlan-challenged: off [fixed] tx-lockless: off [fixed] lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: off [fixed] lpaa10:~# --after-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Could not change any device features lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# Fixes: 2ad7bf3 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cd72c31 ] HDMI on some platforms doesn't enable audio support because its Port Connectivity [31:30] is set to AC_JACK_PORT_NONE: Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x58560010: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 3 0x02 0x03* 0x04 For now, use a quirk to force connectivity based on SSID. If there are more platforms affected by the same issue, we can eye for a more generic solution. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200804155836.16252-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7fabbc ] Drop duplicated words in sound/pci/. {and, the, at} Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20200806021926.32418-1-rdunlap@infradead.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2d2fde ] The jack on Intel NUC 8 Rugged rear panel doesn't work. The spec [1] states that the jack supports both headphone and microphone, so override a Pin Complex which has both Amp-In and Amp-Out to make the jack work. Node 0x1b fits the requirement, and user confirmed the jack now works with new pin config. [1] https://www.intel.com/content/dam/support/us/en/documents/mini-pcs/NUC8CCH_TechProdSpec.pdf BugLink: https://bugs.launchpad.net/bugs/1875199 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200807080514.15293-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d96f27c ] There's another HP desktop has buggy BIOS which flags the Port Connectivity bit as no connection. Apply force connectivity quirk to enable DP/HDMI audio. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200811095336.32396-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4c59b9 ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Link: https://lore.kernel.org/r/20200614033749.2975-1-wu000273@umn.edu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b9fbb0 ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Link: https://lore.kernel.org/r/20200614033344.1814-1-wu000273@umn.edu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deca195 ] Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200613204422.24484-1-wu000273@umn.edu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ea2e4e ] Intel Emmitsburg PCH has the same LPSS than Intel Ice Lake. Add the new IDs to the list of supported devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2ee9ed ] The original qcom kernel changed the PDM GPIOs to be pull-down during sleep at some point. Reportedly this was done because there was some "leakage at PDM outputs during sleep": https://source.codeaurora.org/quic/la/kernel/msm-3.10/commit/?id=0f87e08c1cd3e6484a6f7fb3e74e37340bdcdee0 I cannot say how effective this is, but everything seems to work fine with this change so let's apply the same to mainline just to be sure. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200605185916.318494-3-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0993c8 ] xive_native_provision_pages() allocates memory and passes the pointer to OPAL so kmemleak cannot find the pointer usage in the kernel memory and produces a false positive report (below) (even if the kernel did scan OPAL memory, it is unable to deal with __pa() addresses anyway). This silences the warning. unreferenced object 0xc000200350c40000 (size 65536): comm "qemu-system-ppc", pid 2725, jiffies 4294946414 (age 70776.530s) hex dump (first 32 bytes): 02 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 ....P........... 01 00 08 07 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000081ff046c>] xive_native_alloc_vp_block+0x120/0x250 [<00000000d555d524>] kvmppc_xive_compute_vp_id+0x248/0x350 [kvm] [<00000000d69b9c9f>] kvmppc_xive_connect_vcpu+0xc0/0x520 [kvm] [<000000006acbc81c>] kvm_arch_vcpu_ioctl+0x308/0x580 [kvm] [<0000000089c69580>] kvm_vcpu_ioctl+0x19c/0xae0 [kvm] [<00000000902ae91e>] ksys_ioctl+0x184/0x1b0 [<00000000f3e68bd7>] sys_ioctl+0x48/0xb0 [<0000000001b2c127>] system_call_exception+0x124/0x1f0 [<00000000d2b2ee40>] system_call_common+0xe8/0x214 Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200612043303.84894-1-aik@ozlabs.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
… DMA value in debiirq() [ Upstream commit 6499a0d ] The value av7110->debi_virt is stored in DMA memory, and it is assigned to data, and thus data[0] can be modified at any time by malicious hardware. In this case, "if (data[0] < 2)" can be passed, but then data[0] can be changed into a large number, which may cause buffer overflow when the code "av7110->ci_slot[data[0]]" is used. To fix this possible bug, data[0] is assigned to a local variable, which replaces the use of data[0]. Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b431ef8 ] We make an assumption that a debugfs directory exists, but since this can fail ensure it exists before allowing blktrace setup to complete. Otherwise we end up stuffing blktrace files on the debugfs root directory. In the worst case scenario this *in theory* can create an eventual panic *iff* in the future a similarly named file is created prior on the debugfs root directory. This theoretical crash can happen due to a recursive removal followed by a specific dentry removal. This doesn't fix any known crash, however I have seen the files go into the main debugfs root directory in cases where the debugfs directory was not created due to other internal bugs with blktrace now fixed. blktrace is also completely useless without this directory, so this ensures to userspace we only setup blktrace if the kernel can stuff files where they are supposed to go into. debugfs directory creations typically aren't checked for, and we have maintainers doing sweep removals of these checks, but since we need this check to ensure proper userspace blktrace functionality we make sure to annotate the justification for the check. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a0c256 ] If tcmu_handle_completions() has to process a padding shorter than sizeof(struct tcmu_cmd_entry), the current call to tcmu_flush_dcache_range() with sizeof(struct tcmu_cmd_entry) as length param is wrong and causes crashes on e.g. ARM, because tcmu_flush_dcache_range() in this case calls flush_dcache_page(vmalloc_to_page(start)); with start being an invalid address above the end of the vmalloc'ed area. The fix is to use the minimum of remaining ring space and sizeof(struct tcmu_cmd_entry) as the length param. The patch was tested on kernel 4.19.118. See https://bugzilla.kernel.org/show_bug.cgi?id=208045#c10 Link: https://lore.kernel.org/r/20200629093756.8947-1-bstroesser@ts.fujitsu.com Tested-by: JiangYu <lnsyyj@hotmail.com> Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb7fcad ] Intel Tiger Lake PCH-H has the same LPSS than Intel Broxton. Add the new IDs to the list of supported devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3e3d2b ] Unlike the other instances which represent a complete loss of consistency within the rcache mechanism itself, or a fundamental and obvious misconfiguration by an IOMMU driver, the BUG_ON() in iova_magazine_free_pfns() can be provoked at more or less any time in a "spooky action-at-a-distance" manner by any old device driver passing nonsense to dma_unmap_*() which then propagates through to queue_iova(). Not only is this well outside the IOVA layer's control, it's also nowhere near fatal enough to justify panicking anyway - all that really achieves is to make debugging the offending driver more difficult. Let's simply WARN and otherwise ignore bogus PFNs. Reported-by: Prakash Gupta <guptap@codeaurora.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Prakash Gupta <guptap@codeaurora.org> Link: https://lore.kernel.org/r/acbd2d092b42738a03a21b417ce64e27f8c91c86.1591103298.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20eca01 ] kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f2e8ac ] On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ba8923 ] in amdgpu_driver_open_kms the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1d41698 upstream. If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ohci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 6219424 ("USB: Add Samsung Exynos OHCI diver") Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1cd1b6 upstream. size can potentially hold an overflowed value if its assigned expression is left unchecked, leading to a smaller than needed allocation when vla_group_size() is used by callers to allocate memory. To fix this, add a test for saturation before declaring variables and an overflow check to (n) * sizeof(type). If the expression results in overflow, vla_group_size() will return SIZE_MAX. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Brooke Basile <brookebasile@gmail.com> Acked-by: Felipe Balbi <balbi@kernel.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b74b0a upstream. Some values extracted by ncm_unwrap_ntb() could possibly lead to several different out of bounds reads of memory. Specifically the values passed to netdev_alloc_skb_ip_align() need to be checked so that memory is not overflowed. Resolve this by applying bounds checking to a number of different indexes and lengths of the structure parsing logic. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Brooke Basile <brookebasile@gmail.com> Acked-by: Felipe Balbi <balbi@kernel.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfd08d0 upstream. Inadvertently the commit b1cd1b6 ("USB: gadget: u_f: add overflow checks to VLA macros") makes VLA macros to always return 0 due to different scope of two variables of the same name. Obviously we need to have only one. Fixes: b1cd1b6 ("USB: gadget: u_f: add overflow checks to VLA macros") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Brooke Basile <brookebasile@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20200826192119.56450-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4b9d8a upstream. Clang static analysis reports this error cdc-acm.c:409:3: warning: Use of memory after it is freed acm_process_notification(acm, (unsigned char *)dr); There are three problems, the first one is that dr is not reset The variable dr is set with if (acm->nb_index) dr = (struct usb_cdc_notification *)acm->notification_buffer; But if the notification_buffer is too small it is resized with if (acm->nb_size) { kfree(acm->notification_buffer); acm->nb_size = 0; } alloc_size = roundup_pow_of_two(expected_size); /* * kmalloc ensures a valid notification_buffer after a * use of kfree in case the previous allocation was too * small. Final freeing is done on disconnect. */ acm->notification_buffer = kmalloc(alloc_size, GFP_ATOMIC); dr should point to the new acm->notification_buffer. The second problem is any data in the notification_buffer is lost when the pointer is freed. In the normal case, the current data is accumulated in the notification_buffer here. memcpy(&acm->notification_buffer[acm->nb_index], urb->transfer_buffer, copy_size); When a resize happens, anything before notification_buffer[acm->nb_index] is garbage. The third problem is the acm->nb_index is not reset on a resizing buffer error. So switch resizing to using krealloc and reassign dr and reset nb_index. Fixes: ea25835 ("cdc-acm: reassemble fragmented notifications") Signed-off-by: Tom Rix <trix@redhat.com> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20200801152154.20683-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20934c0 upstream. The PSZ-HA* family of USB disk drives from Sony can't handle the REPORT OPCODES command when using the UAS protocol. This patch adds an appropriate quirks entry. Reported-and-tested-by: Till Dörges <doerges@pre-sense.de> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826143229.GB400430@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e5f10d6 ] Our variety of defined gpu commands have the actual command id field and possibly length and flags applied. We did start to apply the mask during initialization of the cmd descriptors but forgot to also apply it on comparisons. Fix comparisons in order to properly deny access with associated commands. v2: fix lri with correct mask (Chris) References: 926abff ("drm/i915/cmdparser: Ignore Length operands during command matching") Reported-by: Nicolai Stange <nstange@suse.de> Cc: stable@vger.kernel.org # v5.4+ Cc: Miroslav Benes <mbenes@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200817195926.12671-1-mika.kuoppala@linux.intel.com (cherry picked from commit 3b4efa1) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d187c0 ] The SG list may be set up with entry size more than the requested length. Check the usb_request->length and make sure that we don't setup the TRBs to send/receive more than requested. This case may occur when the SG entry is allocated up to a certain minimum size, but the request length is less than that. It can also occur when the request is reused for a different request length. Cc: <stable@vger.kernel.org> # v4.18+ Fixes: a31e63b ("usb: dwc3: gadget: Correct handling of scattergather lists") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2ee3ff ] The usb_request->zero doesn't apply for isoc. Also, if we prepare a 0-length (ZLP) TRB for the OUT direction, we need to prepare an extra TRB to pad up to the MPS alignment. Use the same bounce buffer for the ZLP TRB and the extra pad TRB. Cc: <stable@vger.kernel.org> # v4.5+ Fixes: d6e5a54 ("usb: dwc3: simplify ZLP handling") Fixes: 04c03d1 ("usb: dwc3: gadget: handle request->zero") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc9a2e2 ] Currently dwc3 doesn't handle usb_request->zero for SG requests. This change checks and prepares extra TRBs for the ZLP for SG requests. Cc: <stable@vger.kernel.org> # v4.5+ Fixes: 04c03d1 ("usb: dwc3: gadget: handle request->zero") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d88ca7e ] syzbot is reporting OOB read bug in vc_do_resize() [1] caused by memcpy() based on outdated old_{rows,row_size} values, for resize_screen() can recurse into vc_do_resize() which changes vc->vc_{cols,rows} that outdates old_{rows,row_size} values which were saved before calling resize_screen(). Daniel Vetter explained that resize_screen() should not recurse into fbcon_update_vcs() path due to FBINFO_MISC_USEREVENT being still set when calling resize_screen(). Instead of masking FBINFO_MISC_USEREVENT before calling fbcon_update_vcs(), we can remove FBINFO_MISC_USEREVENT by calling fbcon_update_vcs() only if fb_set_var() returned 0. This change assumes that it is harmless to call fbcon_update_vcs() when fb_set_var() returned 0 without reaching fb_notifier_call_chain(). [1] https://syzkaller.appspot.com/bug?id=c70c88cfd16dcf6e1d3c7f0ab8648b3144b5b25e Reported-and-tested-by: syzbot <syzbot+c37a14770d51a085a520@syzkaller.appspotmail.com> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: kernel test robot <lkp@intel.com> for missing #include Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/075b7e37-3278-cd7d-31ab-c5073cfa8e92@i-love.sakura.ne.jp Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9a06635 upstream. The 'head' and 'tail' commands can take a file path directly. So, you do not need to run 'cat'. cat kernel/kheaders.md5 | head -1 ... is equivalent to: head -1 kernel/kheaders.md5 and the latter saves forking one process. While I was here, I replaced 'head -1' with 'head -n 1'. I also replaced '==' with '=' since we do not have a good reason to use the bashism. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e11773 upstream. This script computes md5sum of headers in srctree and in objtree. However, when we are building in-tree, we know the srctree and the objtree are the same. That is, we end up with the same computation twice. In fact, the first two lines of kernel/kheaders.md5 are always the same for in-tree builds. Unify the two md5sum calculations. For in-tree builds ($building_out_of_srctree is empty), we check only two directories, "include", and "arch/$SRCARCH/include". For out-of-tree builds ($building_out_of_srctree is 1), we check 4 directories, "$srctree/include", "$srctree/arch/$SRCARCH/include", "include", and "arch/$SRCARCH/include" since we know they are all different. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea79e51 upstream. This script copies headers by the cpio command twice; first from srctree, and then from objtree. However, when we building in-tree, we know the srctree and the objtree are the same. That is, all the headers copied by the first cpio are overwritten by the second one. Skip the first cpio when we are building in-tree. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1463f74 upstream. 'pushd' ... 'popd' is the last bash-specific code in this script. One way to avoid it is to run the code in a sub-shell. With that addressed, you can run this script with sh. I replaced $(BASH) with $(CONFIG_SHELL), and I changed the hashbang to #!/bin/sh. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f276031 upstream. This comment block explains why include/generated/compile.h is omitted, but nothing about include/generated/autoconf.h, which might be more difficult to understand. Add more comments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8dfb61d upstream. Allow user to use alternative implementations of compression tools, such as pigz, pbzip2, pxz. For example, multi-threaded tools to speed up the build: $ make GZIP=pigz BZIP2=pbzip2 Variables _GZIP, _BZIP2, _LZOP are used internally because original env vars are reserved by the tools. The use of GZIP in gzip tool is obsolete since 2015. However, alternative implementations (e.g., pigz) still rely on it. BZIP2, BZIP, LZOP vars are not obsolescent. The credit goes to @grsecurity. As a sidenote, for multi-threaded lzma, xz compression one can use: $ export XZ_OPT="--threads=0" Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4a42c8 upstream. Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp. GZIP, BZIP2, LZOP env variables are reserved by the tools. The original attempt to redefine them internally doesn't work in makefiles/scripts intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in broken builds. There can be other broken build commands because of this, so the universal solution is to use non-reserved env variables for the compression tools. Fixes: 8dfb61d ("kbuild: add variables for compression tools") Signed-off-by: Denis Efremov <efremov@linux.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Matthias Maennich <maennich@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25a097f upstream. `uref->usage_index` is not always being properly checked, causing hiddev_ioctl_usage() to go out of bounds under some cases. Fix it. Reported-by: syzbot+34ee1b45d88571c2fa8b@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=f2aebe90b8c56806b050a20b36f51ed6acabe802 Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74a2a7d upstream. As the recent fix addressed the channel swap problem more properly, update the comment as well. Fixes: 1b7ecc2 ("ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109") Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200816084431.102151-1-marcan@marcan.st Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the commit <1c4404efcf2c0> ("<io_uring: make sure async workqueue
is canceled on exit>") caused a crash in io_sq_wq_submit_work().
when io_ring-wq get a req form async_list, which not have been
added to task_list. Then try to delete the req from task_list will caused
a "NULL pointer dereference".
Ensure add req to async_list and task_list at the sametime.
The crash log looks like this:
[95995.973638] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[95995.979123] pgd = c20c8964
[95995.981803] [00000000] *pgd=1c72d831, *pte=00000000, *ppte=00000000
[95995.988043] Internal error: Oops: 817 [Freescale#1] SMP ARM
[95995.992814] Modules linked in: bpfilter(-)
[95995.996898] CPU: 1 PID: 15661 Comm: kworker/u8:5 Not tainted 5.4.56 Freescale#2
[95996.003406] Hardware name: Amlogic Meson platform
[95996.008108] Workqueue: io_ring-wq io_sq_wq_submit_work
[95996.013224] PC is at io_sq_wq_submit_work+0x1f4/0x5c4
[95996.018261] LR is at walk_stackframe+0x24/0x40
[95996.022685] pc : [<c059b898>] lr : [<c030da7c>] psr: 600f0093
[95996.028936] sp : dc6f7e88 ip : dc6f7df0 fp : dc6f7ef4
[95996.034148] r10: deff9800 r9 : dc1d1694 r8 : dda58b80
[95996.039358] r7 : dc6f6000 r6 : dc6f7ebc r5 : dc1d1600 r4 : deff99c0
[95996.045871] r3 : 0000cb5d r2 : 00000000 r1 : ef6b9b80 r0 : c059b88c
[95996.052385] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
[95996.059593] Control: 10c5387d Table: 22be804a DAC: 00000055
[95996.065325] Process kworker/u8:5 (pid: 15661, stack limit = 0x78013c69)
[95996.071923] Stack: (0xdc6f7e88 to 0xdc6f8000)
[95996.076268] 7e80: dc6f7ecc dc6f7e98 00000000 c1f06c08 de9dc800 deff9a04
[95996.084431] 7ea0: 00000000 dc6f7f7c 00000000 c1f65808 0000080c dc677a00 c1ee9bd0 dc6f7ebc
[95996.092594] 7ec0: dc6f7ebc d085c8f6 c0445a90 dc1d1e00 e008f300 c028840 e4ef7100 00000000
[95996.100757] 7ee0: c20d45b0 e4ef7115 dc6f7f34 dc6f7ef8 c03725f0 c059b6b0 c028840 c028840
[95996.108921] 7f00: c028840 00000001 c0288418 e008f300 c028840 e008f314 00000088 c0288418
[95996.117083] 7f20: c1f03d00 dc6f6038 dc6f7f7c dc6f7f38 c0372df8 c037246c dc6f7f5c 00000000
[95996.125245] 7f40: c1f03d00 c1f03d00 c20d3cbe c028840 dc6f7f7c e1c43880 e4fa7980 00000000
[95996.133409] 7f60: e008f300 c0372d9c e48bbe74 e1c4389c dc6f7fac dc6f7f80 c0379244 c0372da8
[95996.141570] 7f80: 600f0093 e4fa7980 c0379108 00000000 00000000 00000000 00000000 00000000
[95996.149734] 7fa0: 00000000 dc6f7fb0 c03010a c0379114 00000000 00000000 00000000 00000000
[95996.157897] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[95996.166060] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[95996.174217] Backtrace:
[95996.176662] [<c059b6a4>] (io_sq_wq_submit_work) from [<c03725f0>] (process_one_work+0x190/0x4c0)
[95996.185425] r10:e4ef7115 r9:c20d45b0 r8:00000000 r7:e4ef7100 r6:c0288400 r5:e008f300
[95996.193237] r4:dc1d1e00
[95996.195760] [<c0372460>] (process_one_work) from [<c0372df8>] (worker_thread+0x5c/0x5bc)
[95996.203836] r10:dc6f6038 r9:c1f03d00 r8:c0288418 r7:00000088 r6:e008f314 r5:c0288400
[95996.211647] r4:e008f300
[95996.214173] [<c0372d9c>] (worker_thread) from [<c0379244>] (kthread+0x13c/0x168)
[95996.221554] r10:e1c4389c r9:e48bbe74 r8:c0372d9c r7:e008f300 r6:00000000 r5:e4fa7980
[95996.229363] r4:e1c43880
[95996.231888] [<c0379108>] (kthread) from [<c03010ac>] (ret_from_fork+0x14/0x28)
[95996.239088] Exception stack(0xdc6f7fb0 to 0xdc6f7ff8)
[95996.244127] 7fa0: 00000000 00000000 00000000 00000000
[95996.252291] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[95996.260453] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[95996.267054] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0379108
[95996.274866] r4:e4fa7980 r3:600f0093
[95996.278430] Code: eb3a59e1 e5952098 e5951094 e5812004 (e5821000)
Signed-off-by: Xin Yin <yinxin_1989@aliyun.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 5.4.62 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Jun 10, 2021
[ Upstream commit 3822d06 ] When configuring TC-MQPRIO offload, only turn off netdev carrier and don't bring physical link down in hardware. Otherwise, when the physical link is brought up again after configuration, it gets re-trained and stalls ongoing traffic. Also, when firmware is no longer accessible or crashed, avoid sending FLOWC and waiting for reply that will never come. Fix following hung_task_timeout_secs trace seen in these cases. INFO: task tc:20807 blocked for more than 122 seconds. Tainted: G S 5.13.0-rc3+ Freescale#122 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:tc state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000 Call Trace: __schedule+0x27b/0x6a0 schedule+0x37/0xa0 schedule_preempt_disabled+0x5/0x10 __mutex_lock.isra.14+0x2a0/0x4a0 ? netlink_lookup+0x120/0x1a0 ? rtnl_fill_ifinfo+0x10f0/0x10f0 __netlink_dump_start+0x70/0x250 rtnetlink_rcv_msg+0x28b/0x380 ? rtnl_fill_ifinfo+0x10f0/0x10f0 ? rtnl_calcit.isra.42+0x120/0x120 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x1a0/0x280 netlink_sendmsg+0x216/0x440 sock_sendmsg+0x56/0x60 __sys_sendto+0xe9/0x150 ? handle_mm_fault+0x6d/0x1b0 ? do_user_addr_fault+0x1c5/0x620 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7f73218321 RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321 RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003 RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6 R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0 Fixes: b1396c2 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Jun 10, 2021
[ Upstream commit 3822d06 ] When configuring TC-MQPRIO offload, only turn off netdev carrier and don't bring physical link down in hardware. Otherwise, when the physical link is brought up again after configuration, it gets re-trained and stalls ongoing traffic. Also, when firmware is no longer accessible or crashed, avoid sending FLOWC and waiting for reply that will never come. Fix following hung_task_timeout_secs trace seen in these cases. INFO: task tc:20807 blocked for more than 122 seconds. Tainted: G S 5.13.0-rc3+ Freescale#122 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:tc state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000 Call Trace: __schedule+0x27b/0x6a0 schedule+0x37/0xa0 schedule_preempt_disabled+0x5/0x10 __mutex_lock.isra.14+0x2a0/0x4a0 ? netlink_lookup+0x120/0x1a0 ? rtnl_fill_ifinfo+0x10f0/0x10f0 __netlink_dump_start+0x70/0x250 rtnetlink_rcv_msg+0x28b/0x380 ? rtnl_fill_ifinfo+0x10f0/0x10f0 ? rtnl_calcit.isra.42+0x120/0x120 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x1a0/0x280 netlink_sendmsg+0x216/0x440 sock_sendmsg+0x56/0x60 __sys_sendto+0xe9/0x150 ? handle_mm_fault+0x6d/0x1b0 ? do_user_addr_fault+0x1c5/0x620 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7f73218321 RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321 RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003 RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6 R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0 Fixes: b1396c2 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Oct 20, 2021
commit 332fdf9 upstream. Currently, mlxsw allows cooling states to be set above the maximum cooling state supported by the driver: # cat /sys/class/thermal/thermal_zone2/cdev0/type mlxsw_fan # cat /sys/class/thermal/thermal_zone2/cdev0/max_state 10 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state # echo $? 0 This results in out-of-bounds memory accesses when thermal state transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the transition table is accessed with a too large index (state) [1]. According to the thermal maintainer, it is the responsibility of the driver to reject such operations [2]. Therefore, return an error when the state to be set exceeds the maximum cooling state supported by the driver. To avoid dead code, as suggested by the thermal maintainer [3], partially revert commit a421ce0 ("mlxsw: core: Extend cooling device with cooling levels") that tried to interpret these invalid cooling states (above the maximum) in a special way. The cooling levels array is not removed in order to prevent the fans going below 20% PWM, which would cause them to get stuck at 0% PWM. [1] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290 Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 Freescale#122 Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016 Workqueue: events_freezable_power_ thermal_zone_device_check Call Trace: dump_stack_lvl+0x8b/0xb3 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b thermal_cooling_device_stats_update+0x271/0x290 __thermal_cdev_update+0x15e/0x4e0 thermal_cdev_update+0x9f/0xe0 step_wise_throttle+0x770/0xee0 thermal_zone_device_update+0x3f6/0xdf0 process_one_work+0xa42/0x1770 worker_thread+0x62f/0x13e0 kthread+0x3ee/0x4e0 ret_from_fork+0x1f/0x30 Allocated by task 1: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 thermal_cooling_device_setup_sysfs+0x153/0x2c0 __thermal_cooling_device_register.part.0+0x25b/0x9c0 thermal_cooling_device_register+0xb3/0x100 mlxsw_thermal_init+0x5c5/0x7e0 __mlxsw_core_bus_device_register+0xcb3/0x19c0 mlxsw_core_bus_device_register+0x56/0xb0 mlxsw_pci_probe+0x54f/0x710 local_pci_probe+0xc6/0x170 pci_device_probe+0x2b2/0x4d0 really_probe+0x293/0xd10 __driver_probe_device+0x2af/0x440 driver_probe_device+0x51/0x1e0 __driver_attach+0x21b/0x530 bus_for_each_dev+0x14c/0x1d0 bus_add_driver+0x3ac/0x650 driver_register+0x241/0x3d0 mlxsw_sp_module_init+0xa2/0x174 do_one_initcall+0xee/0x5f0 kernel_init_freeable+0x45a/0x4de kernel_init+0x1f/0x210 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff8881052f7800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 1016 bytes inside of 1024-byte region [ffff8881052f7800, ffff8881052f7c00) The buggy address belongs to the page: page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0 head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x200000000010200(slab|head|node=0|zone=2) raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-1895-1fdc45c0244e@linaro.org/ [3] https://lore.kernel.org/linux-pm/af9857f2-578e-de3a-e62b-6baff7e69fd4@linaro.org/ CC: Daniel Lezcano <daniel.lezcano@linaro.org> Fixes: a50c1e3 ("mlxsw: core: Implement thermal zone") Fixes: a421ce0 ("mlxsw: core: Extend cooling device with cooling levels") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20211012174955.472928-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Oct 20, 2021
commit 332fdf9 upstream. Currently, mlxsw allows cooling states to be set above the maximum cooling state supported by the driver: # cat /sys/class/thermal/thermal_zone2/cdev0/type mlxsw_fan # cat /sys/class/thermal/thermal_zone2/cdev0/max_state 10 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state # echo $? 0 This results in out-of-bounds memory accesses when thermal state transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the transition table is accessed with a too large index (state) [1]. According to the thermal maintainer, it is the responsibility of the driver to reject such operations [2]. Therefore, return an error when the state to be set exceeds the maximum cooling state supported by the driver. To avoid dead code, as suggested by the thermal maintainer [3], partially revert commit a421ce0 ("mlxsw: core: Extend cooling device with cooling levels") that tried to interpret these invalid cooling states (above the maximum) in a special way. The cooling levels array is not removed in order to prevent the fans going below 20% PWM, which would cause them to get stuck at 0% PWM. [1] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290 Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 Freescale#122 Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016 Workqueue: events_freezable_power_ thermal_zone_device_check Call Trace: dump_stack_lvl+0x8b/0xb3 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b thermal_cooling_device_stats_update+0x271/0x290 __thermal_cdev_update+0x15e/0x4e0 thermal_cdev_update+0x9f/0xe0 step_wise_throttle+0x770/0xee0 thermal_zone_device_update+0x3f6/0xdf0 process_one_work+0xa42/0x1770 worker_thread+0x62f/0x13e0 kthread+0x3ee/0x4e0 ret_from_fork+0x1f/0x30 Allocated by task 1: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 thermal_cooling_device_setup_sysfs+0x153/0x2c0 __thermal_cooling_device_register.part.0+0x25b/0x9c0 thermal_cooling_device_register+0xb3/0x100 mlxsw_thermal_init+0x5c5/0x7e0 __mlxsw_core_bus_device_register+0xcb3/0x19c0 mlxsw_core_bus_device_register+0x56/0xb0 mlxsw_pci_probe+0x54f/0x710 local_pci_probe+0xc6/0x170 pci_device_probe+0x2b2/0x4d0 really_probe+0x293/0xd10 __driver_probe_device+0x2af/0x440 driver_probe_device+0x51/0x1e0 __driver_attach+0x21b/0x530 bus_for_each_dev+0x14c/0x1d0 bus_add_driver+0x3ac/0x650 driver_register+0x241/0x3d0 mlxsw_sp_module_init+0xa2/0x174 do_one_initcall+0xee/0x5f0 kernel_init_freeable+0x45a/0x4de kernel_init+0x1f/0x210 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff8881052f7800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 1016 bytes inside of 1024-byte region [ffff8881052f7800, ffff8881052f7c00) The buggy address belongs to the page: page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0 head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x200000000010200(slab|head|node=0|zone=2) raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-1895-1fdc45c0244e@linaro.org/ [3] https://lore.kernel.org/linux-pm/af9857f2-578e-de3a-e62b-6baff7e69fd4@linaro.org/ CC: Daniel Lezcano <daniel.lezcano@linaro.org> Fixes: a50c1e3 ("mlxsw: core: Implement thermal zone") Fixes: a421ce0 ("mlxsw: core: Extend cooling device with cooling levels") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20211012174955.472928-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Oct 20, 2021
commit 332fdf9 upstream. Currently, mlxsw allows cooling states to be set above the maximum cooling state supported by the driver: # cat /sys/class/thermal/thermal_zone2/cdev0/type mlxsw_fan # cat /sys/class/thermal/thermal_zone2/cdev0/max_state 10 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state # echo $? 0 This results in out-of-bounds memory accesses when thermal state transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the transition table is accessed with a too large index (state) [1]. According to the thermal maintainer, it is the responsibility of the driver to reject such operations [2]. Therefore, return an error when the state to be set exceeds the maximum cooling state supported by the driver. To avoid dead code, as suggested by the thermal maintainer [3], partially revert commit a421ce0 ("mlxsw: core: Extend cooling device with cooling levels") that tried to interpret these invalid cooling states (above the maximum) in a special way. The cooling levels array is not removed in order to prevent the fans going below 20% PWM, which would cause them to get stuck at 0% PWM. [1] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290 Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 Freescale#122 Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016 Workqueue: events_freezable_power_ thermal_zone_device_check Call Trace: dump_stack_lvl+0x8b/0xb3 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b thermal_cooling_device_stats_update+0x271/0x290 __thermal_cdev_update+0x15e/0x4e0 thermal_cdev_update+0x9f/0xe0 step_wise_throttle+0x770/0xee0 thermal_zone_device_update+0x3f6/0xdf0 process_one_work+0xa42/0x1770 worker_thread+0x62f/0x13e0 kthread+0x3ee/0x4e0 ret_from_fork+0x1f/0x30 Allocated by task 1: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 thermal_cooling_device_setup_sysfs+0x153/0x2c0 __thermal_cooling_device_register.part.0+0x25b/0x9c0 thermal_cooling_device_register+0xb3/0x100 mlxsw_thermal_init+0x5c5/0x7e0 __mlxsw_core_bus_device_register+0xcb3/0x19c0 mlxsw_core_bus_device_register+0x56/0xb0 mlxsw_pci_probe+0x54f/0x710 local_pci_probe+0xc6/0x170 pci_device_probe+0x2b2/0x4d0 really_probe+0x293/0xd10 __driver_probe_device+0x2af/0x440 driver_probe_device+0x51/0x1e0 __driver_attach+0x21b/0x530 bus_for_each_dev+0x14c/0x1d0 bus_add_driver+0x3ac/0x650 driver_register+0x241/0x3d0 mlxsw_sp_module_init+0xa2/0x174 do_one_initcall+0xee/0x5f0 kernel_init_freeable+0x45a/0x4de kernel_init+0x1f/0x210 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff8881052f7800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 1016 bytes inside of 1024-byte region [ffff8881052f7800, ffff8881052f7c00) The buggy address belongs to the page: page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0 head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x200000000010200(slab|head|node=0|zone=2) raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-1895-1fdc45c0244e@linaro.org/ [3] https://lore.kernel.org/linux-pm/af9857f2-578e-de3a-e62b-6baff7e69fd4@linaro.org/ CC: Daniel Lezcano <daniel.lezcano@linaro.org> Fixes: a50c1e3 ("mlxsw: core: Implement thermal zone") Fixes: a421ce0 ("mlxsw: core: Extend cooling device with cooling levels") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20211012174955.472928-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
angolini
pushed a commit
to angolini/linux-fslc
that referenced
this pull request
Sep 18, 2024
commit 0b6743b upstream. With structure layout randomization enabled for 'struct inode' we need to avoid overlapping any of the RCU-used / initialized-only-once members, e.g. i_lru or i_sb_list to not corrupt related list traversals when making use of the rcu_head. For an unlucky structure layout of 'struct inode' we may end up with the following splat when running the ftrace selftests: [<...>] list_del corruption, ffff888103ee2cb0->next (tracefs_inode_cache+0x0/0x4e0 [slab object]) is NULL (prev is tracefs_inode_cache+0x78/0x4e0 [slab object]) [<...>] ------------[ cut here ]------------ [<...>] kernel BUG at lib/list_debug.c:54! [<...>] invalid opcode: 0000 [Freescale#1] PREEMPT SMP KASAN [<...>] CPU: 3 PID: 2550 Comm: mount Tainted: G N 6.8.12-grsec+ Freescale#122 ed2f536ca62f28b087b90e3cc906a8d25b3ddc65 [<...>] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [<...>] RIP: 0010:[<ffffffff84656018>] __list_del_entry_valid_or_report+0x138/0x3e0 [<...>] Code: 48 b8 99 fb 65 f2 ff ff ff ff e9 03 5c d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff e9 33 5a d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff <0f> 0b 4c 89 e9 48 89 ea 48 89 ee 48 c7 c7 60 8f dd 89 31 c0 e8 2f [<...>] RSP: 0018:fffffe80416afaf0 EFLAGS: 00010283 [<...>] RAX: 0000000000000098 RBX: ffff888103ee2cb0 RCX: 0000000000000000 [<...>] RDX: ffffffff84655fe8 RSI: ffffffff89dd8b60 RDI: 0000000000000001 [<...>] RBP: ffff888103ee2cb0 R08: 0000000000000001 R09: fffffbd0082d5f25 [<...>] R10: fffffe80416af92f R11: 0000000000000001 R12: fdf99c16731d9b6d [<...>] R13: 0000000000000000 R14: ffff88819ad4b8b8 R15: 0000000000000000 [<...>] RBX: tracefs_inode_cache+0x0/0x4e0 [slab object] [<...>] RDX: __list_del_entry_valid_or_report+0x108/0x3e0 [<...>] RSI: __func__.47+0x4340/0x4400 [<...>] RBP: tracefs_inode_cache+0x0/0x4e0 [slab object] [<...>] RSP: process kstack fffffe80416afaf0+0x7af0/0x8000 [mount 2550 2550] [<...>] R09: kasan shadow of process kstack fffffe80416af928+0x7928/0x8000 [mount 2550 2550] [<...>] R10: process kstack fffffe80416af92f+0x792f/0x8000 [mount 2550 2550] [<...>] R14: tracefs_inode_cache+0x78/0x4e0 [slab object] [<...>] FS: 00006dcb380c1840(0000) GS:ffff8881e0600000(0000) knlGS:0000000000000000 [<...>] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [<...>] CR2: 000076ab72b30e84 CR3: 000000000b088004 CR4: 0000000000360ef0 shadow CR4: 0000000000360ef0 [<...>] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [<...>] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [<...>] ASID: 0003 [<...>] Stack: [<...>] ffffffff818a2315 00000000f5c856ee ffffffff896f1840 ffff888103ee2cb0 [<...>] ffff88812b6b9750 0000000079d714b6 fffffbfff1e9280b ffffffff8f49405f [<...>] 0000000000000001 0000000000000000 ffff888104457280 ffffffff8248b392 [<...>] Call Trace: [<...>] <TASK> [<...>] [<ffffffff818a2315>] ? lock_release+0x175/0x380 fffffe80416afaf0 [<...>] [<ffffffff8248b392>] list_lru_del+0x152/0x740 fffffe80416afb48 [<...>] [<ffffffff8248ba93>] list_lru_del_obj+0x113/0x280 fffffe80416afb88 [<...>] [<ffffffff8940fd19>] ? _atomic_dec_and_lock+0x119/0x200 fffffe80416afb90 [<...>] [<ffffffff8295b244>] iput_final+0x1c4/0x9a0 fffffe80416afbb8 [<...>] [<ffffffff8293a52b>] dentry_unlink_inode+0x44b/0xaa0 fffffe80416afbf8 [<...>] [<ffffffff8293fefc>] __dentry_kill+0x23c/0xf00 fffffe80416afc40 [<...>] [<ffffffff8953a85f>] ? __this_cpu_preempt_check+0x1f/0xa0 fffffe80416afc48 [<...>] [<ffffffff82949ce5>] ? shrink_dentry_list+0x1c5/0x760 fffffe80416afc70 [<...>] [<ffffffff82949b71>] ? shrink_dentry_list+0x51/0x760 fffffe80416afc78 [<...>] [<ffffffff82949da8>] shrink_dentry_list+0x288/0x760 fffffe80416afc80 [<...>] [<ffffffff8294ae75>] shrink_dcache_sb+0x155/0x420 fffffe80416afcc8 [<...>] [<ffffffff8953a7c3>] ? debug_smp_processor_id+0x23/0xa0 fffffe80416afce0 [<...>] [<ffffffff8294ad20>] ? do_one_tree+0x140/0x140 fffffe80416afcf8 [<...>] [<ffffffff82997349>] ? do_remount+0x329/0xa00 fffffe80416afd18 [<...>] [<ffffffff83ebf7a1>] ? security_sb_remount+0x81/0x1c0 fffffe80416afd38 [<...>] [<ffffffff82892096>] reconfigure_super+0x856/0x14e0 fffffe80416afd70 [<...>] [<ffffffff815d1327>] ? ns_capable_common+0xe7/0x2a0 fffffe80416afd90 [<...>] [<ffffffff82997436>] do_remount+0x416/0xa00 fffffe80416afdd0 [<...>] [<ffffffff829b2ba4>] path_mount+0x5c4/0x900 fffffe80416afe28 [<...>] [<ffffffff829b25e0>] ? finish_automount+0x13a0/0x13a0 fffffe80416afe60 [<...>] [<ffffffff82903812>] ? user_path_at_empty+0xb2/0x140 fffffe80416afe88 [<...>] [<ffffffff829b2ff5>] do_mount+0x115/0x1c0 fffffe80416afeb8 [<...>] [<ffffffff829b2ee0>] ? path_mount+0x900/0x900 fffffe80416afed8 [<...>] [<ffffffff8272461c>] ? __kasan_check_write+0x1c/0xa0 fffffe80416afee0 [<...>] [<ffffffff829b31cf>] __do_sys_mount+0x12f/0x280 fffffe80416aff30 [<...>] [<ffffffff829b36cd>] __x64_sys_mount+0xcd/0x2e0 fffffe80416aff70 [<...>] [<ffffffff819f8818>] ? syscall_trace_enter+0x218/0x380 fffffe80416aff88 [<...>] [<ffffffff8111655e>] x64_sys_call+0x5d5e/0x6720 fffffe80416affa8 [<...>] [<ffffffff8952756d>] do_syscall_64+0xcd/0x3c0 fffffe80416affb8 [<...>] [<ffffffff8100119b>] entry_SYSCALL_64_safe_stack+0x4c/0x87 fffffe80416affe8 [<...>] </TASK> [<...>] <PTREGS> [<...>] RIP: 0033:[<00006dcb382ff66a>] vm_area_struct[mount 2550 2550 file 6dcb38225000-6dcb3837e000 22 55(read|exec|mayread|mayexec)]+0x0/0xb8 [userland map] [<...>] Code: 48 8b 0d 29 18 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f6 17 0d 00 f7 d8 64 89 01 48 [<...>] RSP: 002b:0000763d68192558 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [<...>] RAX: ffffffffffffffda RBX: 00006dcb38433264 RCX: 00006dcb382ff66a [<...>] RDX: 000017c3e0d11210 RSI: 000017c3e0d1a5a0 RDI: 000017c3e0d1ae70 [<...>] RBP: 000017c3e0d10fb0 R08: 000017c3e0d11260 R09: 00006dcb383d1be0 [<...>] R10: 000000000020002e R11: 0000000000000246 R12: 0000000000000000 [<...>] R13: 000017c3e0d1ae70 R14: 000017c3e0d11210 R15: 000017c3e0d10fb0 [<...>] RBX: vm_area_struct[mount 2550 2550 file 6dcb38433000-6dcb38434000 5b 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] RCX: vm_area_struct[mount 2550 2550 file 6dcb38225000-6dcb3837e000 22 55(read|exec|mayread|mayexec)]+0x0/0xb8 [userland map] [<...>] RDX: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] RSI: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] RDI: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] RBP: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] RSP: vm_area_struct[mount 2550 2550 anon 763d68173000-763d68195000 7ffffffdd 100133(read|write|mayread|maywrite|growsdown|account)]+0x0/0xb8 [userland map] [<...>] R08: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] R09: vm_area_struct[mount 2550 2550 file 6dcb383d1000-6dcb383d3000 1cd 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] R13: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] R14: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] R15: vm_area_struct[mount 2550 2550 anon 17c3e0d0f000-17c3e0d31000 17c3e0d0f 100033(read|write|mayread|maywrite|account)]+0x0/0xb8 [userland map] [<...>] </PTREGS> [<...>] Modules linked in: [<...>] ---[ end trace 0000000000000000 ]--- The list debug message as well as RBX's symbolic value point out that the object in question was allocated from 'tracefs_inode_cache' and that the list's '->next' member is at offset 0. Dumping the layout of the relevant parts of 'struct tracefs_inode' gives the following: struct tracefs_inode { union { struct inode { struct list_head { struct list_head * next; /* 0 8 */ struct list_head * prev; /* 8 8 */ } i_lru; [...] } vfs_inode; struct callback_head { void (*func)(struct callback_head *); /* 0 8 */ struct callback_head * next; /* 8 8 */ } rcu; }; [...] }; Above shows that 'vfs_inode.i_lru' overlaps with 'rcu' which will destroy the 'i_lru' list as soon as the 'rcu' member gets used, e.g. in call_rcu() or later when calling the RCU callback. This will disturb concurrent list traversals as well as object reuse which assumes these list heads will keep their integrity. For reproduction, the following diff manually overlays 'i_lru' with 'rcu' as, otherwise, one would require some good portion of luck for gambling an unlucky RANDSTRUCT seed: --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -629,6 +629,7 @@ struct inode { umode_t i_mode; unsigned short i_opflags; kuid_t i_uid; + struct list_head i_lru; /* inode LRU list */ kgid_t i_gid; unsigned int i_flags; @@ -690,7 +691,6 @@ struct inode { u16 i_wb_frn_avg_time; u16 i_wb_frn_history; #endif - struct list_head i_lru; /* inode LRU list */ struct list_head i_sb_list; struct list_head i_wb_list; /* backing dev writeback list */ union { The tracefs inode does not need to supply its own RCU delayed destruction of its inode. The inode code itself offers both a "destroy_inode()" callback that gets called when the last reference of the inode is released, and the "free_inode()" which is called after a RCU synchronization period from the "destroy_inode()". The tracefs code can unlink the inode from its list in the destroy_inode() callback, and the simply free it from the free_inode() callback. This should provide the same protection. Link: https://lore.kernel.org/all/20240807115143.45927-3-minipli@grsecurity.net/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Ajay Kaher <ajay.kaher@broadcom.com> Cc: Ilkka =?utf-8?b?TmF1bGFww6TDpA==?= <digirigawa@gmail.com> Link: https://lore.kernel.org/20240807185402.61410544@gandalf.local.home Fixes: baa23a8 ("tracefs: Reset permissions on remount if permissions are options") Reported-by: Mathias Krause <minipli@grsecurity.net> Reported-by: Brad Spengler <spender@grsecurity.net> Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
94 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Automatic merge performed, no conflicts reported.
Built for
imx_v8_defconfig, result - Pass.NOTE: Run-time testing was not performed for this version.
-- andrey