Update 5.4-2.1.x-imx to v5.4.61 from stable #110
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit fcf1b6a upstream. added to kbuild documentation. Provides more official info on building kernels with Clang and LLVM than our wiki. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f44fbc upstream. The tool is called llvm-size, not llvm-objsize. Fixes: fcf1b6a ("Documentation/llvm: add documentation on building w/ Clang/LLVM") Signed-off-by: Fangrui Song <maskray@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…firmware commit 63b903d upstream. As far as I understood from the Kconfig help text, this build rule is used to rebuild the driver firmware, which runs on an old m68k-based chip. So, you need m68k tools for the firmware rebuild. wanxl.c is a PCI driver, but CONFIG_M68K does not select CONFIG_HAVE_PCI. So, you cannot enable CONFIG_WANXL_BUILD_FIRMWARE for ARCH=m68k. In other words, ifeq ($(ARCH),m68k) is false here. I am keeping the dead code for now, but rebuilding the firmware requires 'as68k' and 'ld68k', which I do not have in hand. Instead, the kernel.org m68k GCC [1] successfully built it. Allowing a user to pass in CROSS_COMPILE_M68K= is handier. [1] https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xz Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…rmware commit 734f371 upstream. The firmware source, wanxlfw.S, is currently compiled by the combo of $(CPP) and $(M68KAS). This is not what we usually do for compiling *.S files. In fact, this Makefile is the only user of $(AS) in the kernel build. Instead of combining $(CPP) and (AS) from different tool sets, using $(M68KCC) as an assembler driver is simpler, and saner. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eefb8c1 upstream. Introduce a new READELF variable to top-level Makefile, so the name of readelf binary can be specified. Before this change the name of the binary was hardcoded to "$(CROSS_COMPILE)readelf" which might not be present for every toolchain. This allows to build with LLVM Object Reader by using make parameter READELF=llvm-readelf. Link: ClangBuiltLinux#771 Signed-off-by: Dmitry Golovin <dima@golovin.in> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94f7345 upstream. Python 2 has retired. There is no user of this variable. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa824e0 upstream. As commit 5ef8726 ("kbuild: get rid of misleading $(AS) from documents") noted, we rarely use $(AS) directly in the kernel build. Now that the only/last user of $(AS) in drivers/net/wan/Makefile was converted to $(CC), $(AS) is no longer used in the build process. You can still pass in AS=clang, which is just a switch to turn on the LLVM integrated assembler. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e20e47 upstream. The 'AS' variable is unused for building the kernel. Only the remaining usage is to turn on the integrated assembler. A boolean flag is a better fit for this purpose. AS=clang was added for experts. So, I replaced it with LLVM_IAS=1, breaking the backward compatibility. Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0d1c95 upstream. As Documentation/kbuild/llvm.rst implies, building the kernel with a full set of LLVM tools gets very verbose and unwieldy. Provide a single switch LLVM=1 to use Clang and LLVM tools instead of GCC and Binutils. You can pass it from the command line or as an environment variable. Please note LLVM=1 does not turn on the integrated assembler. You need to pass LLVM_IAS=1 to use it. When the upstream kernel is ready for the integrated assembler, I think we can make it default. We discussed what we need, and we agreed to go with a simple boolean flag that switches both target and host tools: https://lkml.org/lkml/2020/3/28/494 https://lkml.org/lkml/2020/4/3/43 Some items discussed, but not adopted: - LLVM_DIR When multiple versions of LLVM are installed, I just thought supporting LLVM_DIR=/path/to/my/llvm/bin/ might be useful. CC = $(LLVM_DIR)clang LD = $(LLVM_DIR)ld.lld ... However, we can handle this by modifying PATH. So, we decided to not do this. - LLVM_SUFFIX Some distributions (e.g. Debian) package specific versions of LLVM with naming conventions that use the version as a suffix. CC = clang$(LLVM_SUFFIX) LD = ld.lld(LLVM_SUFFIX) ... will allow a user to pass LLVM_SUFFIX=-11 to use clang-11 etc., but the suffixed versions in /usr/bin/ are symlinks to binaries in /usr/lib/llvm-#/bin/, so this can also be handled by PATH. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 119c53d ] drm_gem_dumb_map_offset() now exists and does everything vgem_gem_dump_map does and *ought* to do. In particular, vgem_gem_dumb_map() was trying to reject mmapping an imported dmabuf by checking the existence of obj->filp. Unfortunately, we always allocated an obj->filp, even if unused for an imported dmabuf. Instead, the drm_gem_dumb_map_offset(), since commit 90378e5 ("drm/gem: drm_gem_dumb_map_offset(): reject dma-buf"), uses the obj->import_attach to reject such invalid mmaps. This prevents vgem from allowing userspace mmapping the dumb handle and attempting to incorrectly fault in remote pages belonging to another device, where there may not even be a struct page. v2: Use the default drm_gem_dumb_map_offset() callback Fixes: af33a91 ("drm/vgem: Enable dmabuf import interfaces") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.13+ Link: https://patchwork.freedesktop.org/patch/msgid/20200708154911.21236-1-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39c3a94 ] When punching a hole in a file, use filemap_write_and_wait_range to write back any dirty pages in the range of the hole. As a side effect, if the hole isn't page aligned, this marks unaligned pages at the beginning and the end of the hole read-only. This is required when the block size is smaller than the page size: when those pages are written to again after the hole punching, we must make sure that page_mkwrite is called for those pages so that the page will be fully allocated and any blocks turned into holes from the hole punching will be reallocated. (If a page is writably mapped, page_mkwrite won't be called.) Fixes xfstest generic/567. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70499cd ] Before this patch, some functions started transactions then they called gfs2_block_zero_range. However, gfs2_block_zero_range, like writes, can start transactions, which results in a recursive transaction error. For example: do_shrink trunc_start gfs2_trans_begin <------------------------------------------------ gfs2_block_zero_range iomap_zero_range(inode, from, length, NULL, &gfs2_iomap_ops); iomap_apply ... iomap_zero_range_actor iomap_begin gfs2_iomap_begin gfs2_iomap_begin_write actor (iomap_zero_range_actor) iomap_zero iomap_write_begin gfs2_iomap_page_prepare gfs2_trans_begin <------------------------ This patch reorders the callers of gfs2_block_zero_range so that they only start their transactions after the call. It also adds a BUG_ON to ensure this doesn't happen again. Fixes: 2257e46 ("gfs2: implement gfs2_block_zero_range using iomap_zero_range") Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12d572e ] Fix the memory leakage in debuginfo__find_trace_events() when the probe point is not found in the debuginfo. If there is no probe point found in the debuginfo, debuginfo__find_probes() will NOT return -ENOENT, but 0. Thus the caller of debuginfo__find_probes() must check the tf.ntevs and release the allocated memory for the array of struct probe_trace_event. The current code releases the memory only if the debuginfo__find_probes() hits an error but not checks tf.ntevs. In the result, the memory allocated on *tevs are not released if tf.ntevs == 0. This fixes the memory leakage by checking tf.ntevs == 0 in addition to ret < 0. Fixes: ff74178 ("perf probe: Introduce debuginfo to encapsulate dwarf information") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/159438668346.62703.10887420400718492503.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbe98f9 ] Move collapse_huge_page()'s mmget_still_valid() check into khugepaged_test_exit() itself. collapse_huge_page() is used for anon THP only, and earned its mmget_still_valid() check because it inserts a huge pmd entry in place of the page table's pmd entry; whereas collapse_file()'s retract_page_tables() or collapse_pte_mapped_thp() merely clears the page table's pmd entry. But core dumping without mmap lock must have been as open to mistaking a racily cleared pmd entry for a page table at physical page 0, as exit_mmap() was. And we certainly have no interest in mapping as a THP once dumping core. Fixes: 59ea6d0 ("coredump: fix race condition between collapse_huge_page() and core dumping") Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Song Liu <songliubraving@fb.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [4.8+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008021217020.27773@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3f99d6 ] syzbot crashes on the VM_BUG_ON_MM(khugepaged_test_exit(mm), mm) in __khugepaged_enter(): yes, when one thread is about to dump core, has set core_state, and is waiting for others, another might do something calling __khugepaged_enter(), which now crashes because I lumped the core_state test (known as "mmget_still_valid") into khugepaged_test_exit(). I still think it's best to lump them together, so just in this exceptional case, check mm->mm_users directly instead of khugepaged_test_exit(). Fixes: bbe98f9 ("khugepaged: khugepaged_test_exit() check mmget_still_valid()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Yang Shi <shy828301@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Song Liu <songliubraving@fb.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Eric Dumazet <edumazet@google.com> Cc: <stable@vger.kernel.org> [4.8+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008141503370.18085@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65f0f01 ] For some block devices which large capacity (e.g. 8TB) but small io_opt size (e.g. 8 sectors), in bcache_device_init() the stripes number calcu- lated by, DIV_ROUND_UP_ULL(sectors, d->stripe_size); might be overflow to the unsigned int bcache_device->nr_stripes. This patch uses the uint64_t variable to store DIV_ROUND_UP_ULL() and after the value is checked to be available in unsigned int range, sets it to bache_device->nr_stripes. Then the overflow is avoided. Reported-and-tested-by: Ken Raeburn <raeburn@redhat.com> Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783075 Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0c907a ] The functions will be used outside of export.c and super.c to allow resolving subvolume name from a given id, eg. for subvolume deletion by id ioctl. Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> [ split from the next patch ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ef3959 ] Chris Murphy reported a problem where rpm ostree will bind mount a bunch of things for whatever voodoo it's doing. But when it does this /proc/mounts shows something like /dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0 /dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo/bar 0 0 Despite subvolid=256 being subvol=/foo. This is because we're just spitting out the dentry of the mount point, which in the case of bind mounts is the source path for the mountpoint. Instead we should spit out the path to the actual subvol. Fix this by looking up the name for the subvolid we have mounted. With this fix the same test looks like this /dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0 /dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo 0 0 Reported-by: Chris Murphy <chris@colorremedies.com> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric reported seeing this message while running generic/475 BTRFS: error (device dm-3) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted Full stack trace: BTRFS: error (device dm-0) in btrfs_commit_transaction:2323: errno=-5 IO failure (Error while writing out transaction) BTRFS info (device dm-0): forced readonly BTRFS warning (device dm-0): Skipping commit of aborted transaction. ------------[ cut here ]------------ BTRFS: error (device dm-0) in cleanup_transaction:1894: errno=-5 IO failure BTRFS: Transaction aborted (error -117) BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6480 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6488 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6490 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6498 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64c0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85e8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85f0 len 4096 err no 10 WARNING: CPU: 3 PID: 23985 at fs/btrfs/tree-log.c:3084 btrfs_sync_log+0xbc8/0xd60 [btrfs] BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4288 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4290 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4298 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42d0 len 4096 err no 10 CPU: 3 PID: 23985 Comm: fsstress Tainted: G W L 5.8.0-rc4-default+ #1181 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 RIP: 0010:btrfs_sync_log+0xbc8/0xd60 [btrfs] RSP: 0018:ffff909a44d17bd0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001 RDX: ffff8f3be41cb940 RSI: ffffffffb0108d2b RDI: ffffffffb0108ff7 RBP: ffff909a44d17e70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000037988 R12: ffff8f3bd20e4000 R13: ffff8f3bd20e4428 R14: 00000000ffffff8b R15: ffff909a44d17c70 FS: 00007f6a6ed3fb80(0000) GS:ffff8f3c3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6a6ed3e000 CR3: 00000000525c0003 CR4: 0000000000160ee0 Call Trace: ? finish_wait+0x90/0x90 ? __mutex_unlock_slowpath+0x45/0x2a0 ? lock_acquire+0xa3/0x440 ? lockref_put_or_lock+0x9/0x30 ? dput+0x20/0x4a0 ? dput+0x20/0x4a0 ? do_raw_spin_unlock+0x4b/0xc0 ? _raw_spin_unlock+0x1f/0x30 btrfs_sync_file+0x335/0x490 [btrfs] do_fsync+0x38/0x70 __x64_sys_fsync+0x10/0x20 do_syscall_64+0x50/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f6a6ef1b6e3 Code: Bad RIP value. RSP: 002b:00007ffd01e20038 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 000000000007a120 RCX: 00007f6a6ef1b6e3 RDX: 00007ffd01e1ffa0 RSI: 00007ffd01e1ffa0 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000001 R09: 00007ffd01e2004c R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000009f R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffb007fe0b>] copy_process+0x67b/0x1b00 softirqs last enabled at (0): [<ffffffffb007fe0b>] copy_process+0x67b/0x1b00 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace af146e0e38433456 ]--- BTRFS: error (device dm-0) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted This ret came from btrfs_write_marked_extents(). If we get an aborted transaction via EIO before, we'll see it in btree_write_cache_pages() and return EUCLEAN, which gets printed as "Filesystem corrupted". Except we shouldn't be returning EUCLEAN here, we need to be returning EROFS because EUCLEAN is reserved for actual corruption, not IO errors. We are inconsistent about our handling of BTRFS_FS_STATE_ERROR elsewhere, but we want to use EROFS for this particular case. The original transaction abort has the real error code for why we ended up with an aborted transaction, all subsequent actions just need to return EROFS because they may not have a trans handle and have no idea about the original cause of the abort. After patch "btrfs: don't WARN if we abort a transaction with EROFS" the stacktrace will not be dumped either. Reported-by: Eric Sandeen <esandeen@redhat.com> CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add full test stacktrace ] Signed-off-by: David Sterba <dsterba@suse.com>
[ Upstream commit bf31f87 ] The status of aborted transaction can change between calls and it needs to be accessed by READ_ONCE. Add a helper that also wraps the unlikely hint. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f70fff8 upstream. The Flex Book uses the same ALC298 codec as other Samsung laptops which have the no headphone sound bug, like my Samsung Notebook. The Flex Book owner used Early Patching to confirm that this quirk fixes the bug. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423 Signed-off-by: Mike Pozulp <pozulp.kernel@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200814045346.645367-1-pozulp.kernel@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e17f02d upstream. The Galaxy Book Ion uses the same ALC298 codec as other Samsung laptops which have the no headphone sound bug, like my Samsung Notebook. The Galaxy Book owner confirmed that this patch fixes the bug. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423 Signed-off-by: Mike Pozulp <pozulp.kernel@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200818165446.499821-1-pozulp.kernel@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…d in j1939_tp_txtimer() commit cd3b363 upstream. The current stack implementation do not support ECTS requests of not aligned TP sized blocks. If ECTS will request a block with size and offset spanning two TP blocks, this will cause memcpy() to read beyond the queued skb (which does only contain one TP sized block). Sometimes KASAN will detect this read if the memory region beyond the skb was previously allocated and freed. In other situations it will stay undetected. The ETP transfer in any case will be corrupted. This patch adds a sanity check to avoid this kind of read and abort the session with error J1939_XTP_ABORT_ECTS_TOO_BIG. Reported-by: syzbot+5322482fe520b02aea30@syzkaller.appspotmail.com Fixes: 9d71dd0 ("can: add support of SAE J1939 protocol") Cc: linux-stable <stable@vger.kernel.org> # >= v5.4 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-3-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af804b7 upstream. This patch adds check to ensure that the struct net_device::ml_priv is allocated, as it is used later by the j1939 stack. The allocation is done by all mainline CAN network drivers, but when using bond or team devices this is not the case. Bail out if no ml_priv is allocated. Reported-by: syzbot+f03d384f3455d28833eb@syzkaller.appspotmail.com Fixes: 9d71dd0 ("can: add support of SAE J1939 protocol") Cc: linux-stable <stable@vger.kernel.org> # >= v5.4 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-4-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ddf75be upstream. CONFIG_OF_DYNAMIC and CONFIG_ACPI allow adding SPI devices at runtime using a DeviceTree overlay or DSDT patch. CONFIG_SPI_SLAVE allows the same via sysfs. But there are no precautions to prevent adding a device below a controller that's being removed. Such a device is unusable and may not even be able to unbind cleanly as it becomes inaccessible once the controller has been torn down. E.g. it is then impossible to quiesce the device's interrupt. of_spi_notify() and acpi_spi_notify() do hold a ref on the controller, but otherwise run lockless against spi_unregister_controller(). Fix by holding the spi_add_lock in spi_unregister_controller() and bailing out of spi_add_device() if the controller has been unregistered concurrently. Fixes: ce79d54 ("spi/of: Add OF notifier handler") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v3.19+ Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Link: https://lore.kernel.org/r/a8c3205088a969dc8410eec1eba9aface60f36af.1596451035.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcf85fc upstream. romfs has a superblock field that limits the size of the filesystem; data beyond that limit is never accessed. romfs_dev_read() fetches a caller-supplied number of bytes from the backing device. It returns 0 on success or an error code on failure; therefore, its API can't represent short reads, it's all-or-nothing. However, when romfs_dev_read() detects that the requested operation would cross the filesystem size limit, it currently silently truncates the requested number of bytes. This e.g. means that when the content of a file with size 0x1000 starts one byte before the filesystem size limit, ->readpage() will only fill a single byte of the supplied page while leaving the rest uninitialized, leaking that uninitialized memory to userspace. Fix it by returning an error code instead of truncating the read when the requested read operation would go beyond the end of the filesystem. Fixes: da4458b ("NOMMU: Make it possible for RomFS to use MTD devices directly") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200818013202.2246365-1-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71e8432 upstream. kmemleak report memory leak as follows: unreferenced object 0x607ee4e5f948 (size 8): comm "syz-executor.1", pid 2098, jiffies 4295031601 (age 288.468s) hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace: relay_open kernel/relay.c:583 [inline] relay_open+0xb6/0x970 kernel/relay.c:563 do_blk_trace_setup+0x4a8/0xb20 kernel/trace/blktrace.c:557 __blk_trace_setup+0xb6/0x150 kernel/trace/blktrace.c:597 blk_trace_ioctl+0x146/0x280 kernel/trace/blktrace.c:738 blkdev_ioctl+0xb2/0x6a0 block/ioctl.c:613 block_ioctl+0xe5/0x120 fs/block_dev.c:1871 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x170/0x1ce fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 'chan->buf' is malloced in relay_open() by alloc_percpu() but not free while destroy the relay channel. Fix it by adding free_percpu() before return from relay_destroy_channel(). Fixes: 017c59c ("relay: Use per CPU constructs for the relay channel buffer pointers") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: David Rientjes <rientjes@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Axtens <dja@axtens.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Akash Goel <akash.goel@intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200817122826.48518-1-weiyongjun1@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c17c3dc upstream. syzbot crashed on the VM_BUG_ON_PAGE(PageTail) in munlock_vma_page(), when called from uprobes __replace_page(). Which of many ways to fix it? Settled on not calling when PageCompound (since Head and Tail are equals in this context, PageCompound the usual check in uprobes.c, and the prior use of FOLL_SPLIT_PMD will have cleared PageMlocked already). Fixes: 5a52c9d ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [5.4+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008161338360.20413@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e08d3fd upstream. The lowmem_reserve arrays provide a means of applying pressure against allocations from lower zones that were targeted at higher zones. Its values are a function of the number of pages managed by higher zones and are assigned by a call to the setup_per_zone_lowmem_reserve() function. The function is initially called at boot time by the function init_per_zone_wmark_min() and may be called later by accesses of the /proc/sys/vm/lowmem_reserve_ratio sysctl file. The function init_per_zone_wmark_min() was moved up from a module_init to a core_initcall to resolve a sequencing issue with khugepaged. Unfortunately this created a sequencing issue with CMA page accounting. The CMA pages are added to the managed page count of a zone when cma_init_reserved_areas() is called at boot also as a core_initcall. This makes it uncertain whether the CMA pages will be added to the managed page counts of their zones before or after the call to init_per_zone_wmark_min() as it becomes dependent on link order. With the current link order the pages are added to the managed count after the lowmem_reserve arrays are initialized at boot. This means the lowmem_reserve values at boot may be lower than the values used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the ratio values are unchanged. In many cases the difference is not significant, but for example an ARM platform with 1GB of memory and the following memory layout cma: Reserved 256 MiB at 0x0000000030000000 Zone ranges: DMA [mem 0x0000000000000000-0x000000002fffffff] Normal empty HighMem [mem 0x0000000030000000-0x000000003fffffff] would result in 0 lowmem_reserve for the DMA zone. This would allow userspace to deplete the DMA zone easily. Funnily enough $ cat /proc/sys/vm/lowmem_reserve_ratio would fix up the situation because as a side effect it forces setup_per_zone_lowmem_reserve. This commit breaks the link order dependency by invoking init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages have the chance to be properly accounted in their zone(s) and allowing the lowmem_reserve arrays to receive consistent values. Fixes: bc22af7 ("mm: update min_free_kbytes from khugepaged after core initialization") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Jason Baron <jbaron@akamai.com> Cc: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1597423766-27849-1-git-send-email-opendmb@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88e8ac1 upstream. The following race is observed with the repeated online, offline and a delay between two successive online of memory blocks of movable zone. P1 P2 Online the first memory block in the movable zone. The pcp struct values are initialized to default values,i.e., pcp->high = 0 & pcp->batch = 1. Allocate the pages from the movable zone. Try to Online the second memory block in the movable zone thus it entered the online_pages() but yet to call zone_pcp_update(). This process is entered into the exit path thus it tries to release the order-0 pages to pcp lists through free_unref_page_commit(). As pcp->high = 0, pcp->count = 1 proceed to call the function free_pcppages_bulk(). Update the pcp values thus the new pcp values are like, say, pcp->high = 378, pcp->batch = 63. Read the pcp's batch value using READ_ONCE() and pass the same to free_pcppages_bulk(), pcp values passed here are, batch = 63, count = 1. Since num of pages in the pcp lists are less than ->batch, then it will stuck in while(list_empty(list)) loop with interrupts disabled thus a core hung. Avoid this by ensuring free_pcppages_bulk() is called with proper count of pcp list pages. The mentioned race is some what easily reproducible without [1] because pcp's are not updated for the first memory block online and thus there is a enough race window for P2 between alloc+free and pcp struct values update through onlining of second memory block. With [1], the race still exists but it is very narrow as we update the pcp struct values for the first memory block online itself. This is not limited to the movable zone, it could also happen in cases with the normal zone (e.g., hotplug to a node that only has DMA memory, or no other memory yet). [1]: https://patchwork.kernel.org/patch/11696389/ Fixes: 5f8dcc2 ("page-allocator: split per-cpu list into one-list-per-migrate-type") Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: <stable@vger.kernel.org> [2.6+] Link: http://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…obe" [ Upstream commit dca9323 ] FCP T10-PI and NVMe features are independent of each other. This patch allows both features to co-exist. This reverts commit 5da05a2. Link: https://lore.kernel.org/r/20200806111014.28434-12-njavali@marvell.com Fixes: 5da05a2 ("scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa8de0a ] If you right-click the first row in the option tree, the pop-up menu shows up, but if you right-click the second row or below, the event is ignored due to the following check: if (e->y() <= header()->geometry().bottom()) { Perhaps, the intention was to show the pop-menu only when the tree header was right-clicked, but this handler is not called in that case. Since the origin of e->y() starts from the bottom of the header, this check is odd. Going forward, you can right-click anywhere in the tree to get the pop-up menu. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d85de33 ] If you right-click in the ConfigList window, you will see the following messages in the console: QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888 QObject::connect: (sender name: 'config') QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897 QObject::connect: (sender name: 'config') QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906 QObject::connect: (sender name: 'config') Right, there is no such slot in QAction. I think this is a typo of setChecked. Due to this bug, when you toggled the menu "Option->Show Name/Range/Data" the state of the context menu was not previously updated. Fix this. Fixes: d5d973c ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6163a98 ] efifb_probe() will issue an error message in case the kernel is booted as Xen dom0 from UEFI as EFI_MEMMAP won't be set in this case. Avoid that message by calling efi_mem_desc_lookup() only if EFI_MEMMAP is set. Fixes: 38ac028 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB") Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee87e15 ] ../arch/x86/pci/xen.c: In function ‘pci_xen_init’: ../arch/x86/pci/xen.c:410:2: error: implicit declaration of function ‘acpi_noirq_set’; did you mean ‘acpi_irq_get’? [-Werror=implicit-function-declaration] acpi_noirq_set(); Fixes: 88e9ca1 ("xen/pci: Use acpi_noirq_set() helper to avoid #ifdef") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: xen-devel@lists.xenproject.org Cc: linux-pci@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a812f2d ] Driver shall add only the kernel qps to the flush list for clean up. During async error events from the HW, driver is adding qps to this list without checking if the qp is kernel qp or not. Add a check to avoid user qp addition to the flush list. Fixes: 942c9b6 ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing") Fixes: c50866e ("bnxt_re: fix the regression due to changes in alloc_pbl") Link: https://lore.kernel.org/r/1596689148-4023-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e0b17b ] If an error occurs during the construction of an afs superblock, it's possible that an error occurs after a superblock is created, but before we've created the root dentry. If the superblock has a dynamic root (ie. what's normally mounted on /afs), the afs_kill_super() will call afs_dynroot_depopulate() to unpin any created dentries - but this will oops if the root hasn't been created yet. Fix this by skipping that bit of code if there is no root dentry. This leads to an oops looking like: general protection fault, ... KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] ... RIP: 0010:afs_dynroot_depopulate+0x25f/0x529 fs/afs/dynroot.c:385 ... Call Trace: afs_kill_super+0x13b/0x180 fs/afs/super.c:535 deactivate_locked_super+0x94/0x160 fs/super.c:335 afs_get_tree+0x1124/0x1460 fs/afs/super.c:598 vfs_get_tree+0x89/0x2f0 fs/super.c:1547 do_new_mount fs/namespace.c:2875 [inline] path_mount+0x1387/0x2070 fs/namespace.c:3192 do_mount fs/namespace.c:3205 [inline] __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount fs/namespace.c:3390 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 which is oopsing on this line: inode_lock(root->d_inode); presumably because sb->s_root was NULL. Fixes: 0da0b7f ("afs: Display manually added cells in dynamic root mount") Reported-by: syzbot+c1eff8205244ae7e11a6@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d75785 ] Add the 32-bit vdso Makefile to the vdso_install rule so that 'make vdso_install' installs the 32-bit compat vdso when it is compiled. Fixes: a7f71a2 ("arm64: compat: Add vDSO") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Will Deacon <will@kernel.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lore.kernel.org/r/20200818014950.42492-1-swboyd@chromium.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0410d07 ] When the ARP monitor is used for link detection, ARP replies are validated for all slaves (arp_validate=3) and fail_over_mac is set to active, two slaves of an active-backup bond may get stuck in a state where both of them are active and pass packets that they receive to the bond. This state makes IPv6 duplicate address detection fail. The state is reached thus: 1. The current active slave goes down because the ARP target is not reachable. 2. The current ARP slave is chosen and made active. 3. A new slave is enslaved. This new slave becomes the current active slave and can reach the ARP target. As a result, the current ARP slave stays active after the enslave action has finished and the log is littered with "PROBE BAD" messages: > bond0: PROBE: c_arp ens10 && cas ens11 BAD The workaround is to remove the slave with "going back" status from the bond and re-enslave it. This issue was encountered when DPDK PMD interfaces were being enslaved to an active-backup bond. I would be possible to fix the issue in bond_enslave() or bond_change_active_slave() but the ARP monitor was fixed instead to keep most of the actions changing the current ARP slave in the ARP monitor code. The current ARP slave is set as inactive and backup during the commit phase. A new state, BOND_LINK_FAIL, has been introduced for slaves in the context of the ARP monitor. This allows administrators to see how slaves are rotated for sending ARP requests and attempts are made to find a new active slave. Fixes: b2220ca ("bonding: refactor ARP active-backup monitor") Signed-off-by: Jiri Wiesner <jwiesner@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63d4a4c ] The reset work is scheduled by the timer routine whenever it detects that a device reset is required (e.g. when a keep_alive signal is missing). When releasing device resources in ena_destroy_device() the driver cancels the scheduling of the timer routine without destroying the reset work explicitly. This creates the following bug: The driver is suspended and the ena_suspend() function is called -> This function calls ena_destroy_device() to free the net device resources -> The driver waits for the timer routine to finish its execution and then cancels it, thus preventing from it to be called again. If, in its final execution, the timer routine schedules a reset, the reset routine might be called afterwards,and a redundant call to ena_restore_device() would be made. By changing the reset routine we allow it to read the device's state accurately. This is achieved by checking whether ENA_FLAG_TRIGGER_RESET flag is set before resetting the device and making both the destruction function and the flag check are under rtnl lock. The ENA_FLAG_TRIGGER_RESET is cleared at the end of the destruction routine. Also surround the flag check with 'likely' because we expect that the reset routine would be called only when ENA_FLAG_TRIGGER_RESET flag is set. The destruction of the timer and reset services in __ena_shutoff() have to stay, even though the timer routine is destroyed in ena_destroy_device(). This is to avoid a case in which the reset routine is scheduled after free_netdev() in __ena_shutoff(), which would create an access to freed memory in adapter->flags. Fixes: 8c5c7ab ("net: ena: add power management ops to the ENA driver") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
…et_port_probe() [ Upstream commit cf96d97 ] Replace alloc_etherdev_mq with devm_alloc_etherdev_mqs. In this way, when probe fails, netdev can be freed automatically. Fixes: 4d5ae32 ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3d897e ] netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the queue number, so the “skb->queue_mapping - 1” will be used. This may cause the last queue of VF not been used. Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called later will get the correct queue number, and VF will be able to use all queues. Fixes: b3bf566 ("hv_netvsc: defer queue selection to VF") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 774d977 ] clang static analysis reports this problem b53_common.c:1583:13: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ent.port &= ~BIT(port); ~~~~~~~~ ^ ent is set by a successful call to b53_arl_read(). Unsuccessful calls are caught by an switch statement handling specific returns. b32_arl_read() calls b53_arl_op_wait() which fails with the unhandled -ETIMEDOUT. So add -ETIMEDOUT to the switch statement. Because b53_arl_op_wait() already prints out a message, do not add another one. Fixes: 1da6df8 ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 90a9b10 upstream. As per PAPR we have to look for both EPOW sensor value and event modifier to identify the type of event and take appropriate action. In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes": SYSTEM_SHUTDOWN 3 The system must be shut down. An EPOW-aware OS logs the EPOW error log information, then schedules the system to be shut down to begin after an OS defined delay internal (default is 10 minutes.) Then in section 10.3.2.2.8 there is table 146 "Platform Event Log Format, Version 6, EPOW Section", which includes the "EPOW Event Modifier": For EPOW sensor value = 3 0x01 = Normal system shutdown with no additional delay 0x02 = Loss of utility power, system is running on UPS/Battery 0x03 = Loss of system critical functions, system should be shutdown 0x04 = Ambient temperature too high All other values = reserved We have a user space tool (rtas_errd) on LPAR to monitor for EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown after predefined time. It also starts monitoring for any new EPOW events. If it receives "Power restored" event before predefined time it will cancel the shutdown. Otherwise after predefined time it will shutdown the system. Commit 79872e3 ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of the "on UPS/Battery" case, to immediately shutdown the system. This breaks existing setups that rely on the userspace tool to delay shutdown and let the system run on the UPS. Fixes: 79872e3 ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Massage change log and add PAPR references] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98086df upstream. destroy_workqueue() should be called to destroy efi_rts_wq when efisubsys_init() init resources fails. Cc: <stable@vger.kernel.org> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Li Heng <liheng40@huawei.com> Link: https://lore.kernel.org/r/1595229738-10087-1-git-send-email-liheng40@huawei.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9ed4a6 upstream. When adding a new fd to an epoll, and that this new fd is an epoll fd itself, we recursively scan the fds attached to it to detect cycles, and add non-epool files to a "check list" that gets subsequently parsed. However, this check list isn't completely safe when deletions can happen concurrently. To sidestep the issue, make sure that a struct file placed on the check list sees its f_count increased, ensuring that a concurrent deletion won't result in the file disapearing from under our feet. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52c4796 upstream. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75802ca upstream. This is found by code observation only. Firstly, the worst case scenario should assume the whole range was covered by pmd sharing. The old algorithm might not work as expected for ranges like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the expected range should be (0, 2g). Since at it, remove the loop since it should not be required. With that, the new code should be faster too when the invalidating range is huge. Mike said: : With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only : adjust to (0, 1g+2m) which is incorrect. : : We should cc stable. The original reason for adjusting the range was to : prevent data corruption (getting wrong page). Since the range is not : always adjusted correctly, the potential for corruption still exists. : : However, I am fairly confident that adjust_range_if_pmd_sharing_possible : is only gong to be called in two cases: : : 1) for a single page : 2) for range == entire vma : : In those cases, the current code should produce the correct results. : : To be safe, let's just cc stable. Fixes: 017b166 ("mm: migration: fix migration of huge PMD shared pages") Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200730201636.74778-1-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For support of long running hypercalls xen_maybe_preempt_hcall() is calling cond_resched() in case a hypercall marked as preemptible has been interrupted. Normally this is no problem, as only hypercalls done via some ioctl()s are marked to be preemptible. In rare cases when during such a preemptible hypercall an interrupt occurs and any softirq action is started from irq_exit(), a further hypercall issued by the softirq handler will be regarded to be preemptible, too. This might lead to rescheduling in spite of the softirq handler potentially having set preempt_disable(), leading to splats like: BUG: sleeping function called from invalid context at drivers/xen/preempt.c:37 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 20775, name: xl INFO: lockdep is turned off. CPU: 1 PID: 20775 Comm: xl Tainted: G D W 5.4.46-1_prgmr_debug.el7.x86_64 Freescale#1 Call Trace: <IRQ> dump_stack+0x8f/0xd0 ___might_sleep.cold.76+0xb2/0x103 xen_maybe_preempt_hcall+0x48/0x70 xen_do_hypervisor_callback+0x37/0x40 RIP: e030:xen_hypercall_xen_version+0xa/0x20 Code: ... RSP: e02b:ffffc900400dcc30 EFLAGS: 00000246 RAX: 000000000004000d RBX: 0000000000000200 RCX: ffffffff8100122a RDX: ffff88812e788000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffffff83ee3ad0 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: ffff8881824aa0b0 R13: 0000000865496000 R14: 0000000865496000 R15: ffff88815d040000 ? xen_hypercall_xen_version+0xa/0x20 ? xen_force_evtchn_callback+0x9/0x10 ? check_events+0x12/0x20 ? xen_restore_fl_direct+0x1f/0x20 ? _raw_spin_unlock_irqrestore+0x53/0x60 ? debug_dma_sync_single_for_cpu+0x91/0xc0 ? _raw_spin_unlock_irqrestore+0x53/0x60 ? xen_swiotlb_sync_single_for_cpu+0x3d/0x140 ? mlx4_en_process_rx_cq+0x6b6/0x1110 [mlx4_en] ? mlx4_en_poll_rx_cq+0x64/0x100 [mlx4_en] ? net_rx_action+0x151/0x4a0 ? __do_softirq+0xed/0x55b ? irq_exit+0xea/0x100 ? xen_evtchn_do_upcall+0x2c/0x40 ? xen_do_hypervisor_callback+0x29/0x40 </IRQ> ? xen_hypercall_domctl+0xa/0x20 ? xen_hypercall_domctl+0x8/0x20 ? privcmd_ioctl+0x221/0x990 [xen_privcmd] ? do_vfs_ioctl+0xa5/0x6f0 ? ksys_ioctl+0x60/0x90 ? trace_hardirqs_off_thunk+0x1a/0x20 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x62/0x250 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix that by testing preempt_count() before calling cond_resched(). In kernel 5.8 this can't happen any more due to the entry code rework (more than 100 patches, so not a candidate for backporting). The issue was introduced in kernel 4.3, so this patch should go into all stable kernels in [4.3 ... 5.7]. Reported-by: Sarah Newman <srn@prgmr.com> Fixes: 0fa2f5c ("sched/preempt, xen: Use need_resched() instead of should_resched()") Cc: Sarah Newman <srn@prgmr.com> Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Chris Brannon <cmb@prgmr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdfe7cb upstream. The 'flags' field of 'struct mmu_notifier_range' is used to indicate whether invalidate_range_{start,end}() are permitted to block. In the case of kvm_mmu_notifier_invalidate_range_start(), this field is not forwarded on to the architecture-specific implementation of kvm_unmap_hva_range() and therefore the backend cannot sensibly decide whether or not to block. Add an extra 'flags' parameter to kvm_unmap_hva_range() so that architectures are aware as to whether or not they are permitted to block. Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20200811102725.7121-2-will@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b533137 upstream. When an MMU notifier call results in unmapping a range that spans multiple PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary, since this avoids running into RCU stalls during VM teardown. Unfortunately, if the VM is destroyed as a result of OOM, then blocking is not permitted and the call to the scheduler triggers the following BUG(): | BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394 | in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper | INFO: lockdep is turned off. | CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 Freescale#1 | Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 | Call trace: | dump_backtrace+0x0/0x284 | show_stack+0x1c/0x28 | dump_stack+0xf0/0x1a4 | ___might_sleep+0x2bc/0x2cc | unmap_stage2_range+0x160/0x1ac | kvm_unmap_hva_range+0x1a0/0x1c8 | kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8 | __mmu_notifier_invalidate_range_start+0x218/0x31c | mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0 | __oom_reap_task_mm+0x128/0x268 | oom_reap_task+0xac/0x298 | oom_reaper+0x178/0x17c | kthread+0x1e4/0x1fc | ret_from_fork+0x10/0x30 Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier flags. Cc: <stable@vger.kernel.org> Fixes: 8b3405e ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd") Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20200811102725.7121-3-will@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 5.4.61 stable release Conflicts (manual resolve, upstream version taken): - drivers/xen/swiotlb-xen.c Port upstream commit cca58a1 to NXP tree, manual hunk was resolved during merge. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Nov 19, 2020
commit df5b0ab upstream. Limit the CPU number to num_possible_cpus(), because setting it to a value lower than INT_MAX but higher than NR_CPUS produces the following error on reboot and shutdown: BUG: unable to handle page fault for address: ffffffff90ab1bb0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0 Oops: 0000 [Freescale#1] SMP CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm Freescale#110 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:migrate_to_reboot_cpu+0xe/0x60 Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c RSP: 0018:ffffc90000013e08 EFLAGS: 00010246 RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000 RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0 RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000 FS: 00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __do_sys_reboot.cold+0x34/0x5b do_syscall_64+0x2d/0x40 Fixes: 1b3a5d0 ("reboot: move arch/x86 reboot= handling to generic kernel") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Fabian Frederick <fabf@skynet.be> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Kees Cook <keescook@chromium.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Robin Holt <robinmholt@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201103214025.116799-3-mcroce@linux.microsoft.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LeBlue
pushed a commit
to LeBlue/linux-fslc
that referenced
this pull request
May 1, 2021
commit df5b0ab upstream. Limit the CPU number to num_possible_cpus(), because setting it to a value lower than INT_MAX but higher than NR_CPUS produces the following error on reboot and shutdown: BUG: unable to handle page fault for address: ffffffff90ab1bb0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0 Oops: 0000 [Freescale#1] SMP CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm Freescale#110 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:migrate_to_reboot_cpu+0xe/0x60 Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c RSP: 0018:ffffc90000013e08 EFLAGS: 00010246 RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000 RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0 RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000 FS: 00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __do_sys_reboot.cold+0x34/0x5b do_syscall_64+0x2d/0x40 Fixes: 1b3a5d0 ("reboot: move arch/x86 reboot= handling to generic kernel") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Fabian Frederick <fabf@skynet.be> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Kees Cook <keescook@chromium.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Robin Holt <robinmholt@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201103214025.116799-3-mcroce@linux.microsoft.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [sudip: use reboot_mode instead of mode] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
otavio
pushed a commit
that referenced
this pull request
Jan 3, 2023
commit 26273ad upstream. When a new request is allocated, the refcount will be zero if it is reused, but if the request is newly allocated from slab, it is not fully initialized before being added to idr. If the p9_read_work got a response before the refcount initiated. It will use a uninitialized req, which will result in a bad request data struct. Here is the logs from syzbot. Corrupted memory at 0xffff88807eade00b [ 0xff 0x07 0x00 0x00 0x00 0x00 0x00 0x00 . . . . . . . . ] (in kfence-#110): p9_fcall_fini net/9p/client.c:248 [inline] p9_req_put net/9p/client.c:396 [inline] p9_req_put+0x208/0x250 net/9p/client.c:390 p9_client_walk+0x247/0x540 net/9p/client.c:1165 clone_fid fs/9p/fid.h:21 [inline] v9fs_fid_xattr_set+0xe4/0x2b0 fs/9p/xattr.c:118 v9fs_xattr_set fs/9p/xattr.c:100 [inline] v9fs_xattr_handler_set+0x6f/0x120 fs/9p/xattr.c:159 __vfs_setxattr+0x119/0x180 fs/xattr.c:182 __vfs_setxattr_noperm+0x129/0x5f0 fs/xattr.c:216 __vfs_setxattr_locked+0x1d3/0x260 fs/xattr.c:277 vfs_setxattr+0x143/0x340 fs/xattr.c:309 setxattr+0x146/0x160 fs/xattr.c:617 path_setxattr+0x197/0x1c0 fs/xattr.c:636 __do_sys_setxattr fs/xattr.c:652 [inline] __se_sys_setxattr fs/xattr.c:648 [inline] __ia32_sys_setxattr+0xc0/0x160 fs/xattr.c:648 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Below is a similar scenario, the scenario in the syzbot log looks more complicated than this one, but this patch can fix it. T21124 p9_read_work ======================== second trans ================================= p9_client_walk p9_client_rpc p9_client_prepare_req p9_tag_alloc req = kmem_cache_alloc(p9_req_cache, GFP_NOFS); tag = idr_alloc << preempted >> req->tc.tag = tag; /* req->[refcount/tag] == uninitialized */ m->rreq = p9_tag_lookup(m->client, m->rc.tag); /* increments uninitalized refcount */ refcount_set(&req->refcount, 2); /* cb drops one ref */ p9_client_cb(req) /* reader thread drops its ref: request is incorrectly freed */ p9_req_put(req) /* use after free and ref underflow */ p9_req_put(req) To fix it, we can initialize the refcount to zero before add to idr. Link: https://lkml.kernel.org/r/20221201033310.18589-1-schspa@gmail.com Cc: stable@vger.kernel.org # 6.0+ due to 6cda128 ("9p: Drop kref usage") Fixes: 728356d ("9p: Add refcount to p9_req_t") Reported-by: syzbot+8f1060e2aaf8ca55220b@syzkaller.appspotmail.com Signed-off-by: Schspa Shi <schspa@gmail.com> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Jan 9, 2023
commit 26273ad upstream. When a new request is allocated, the refcount will be zero if it is reused, but if the request is newly allocated from slab, it is not fully initialized before being added to idr. If the p9_read_work got a response before the refcount initiated. It will use a uninitialized req, which will result in a bad request data struct. Here is the logs from syzbot. Corrupted memory at 0xffff88807eade00b [ 0xff 0x07 0x00 0x00 0x00 0x00 0x00 0x00 . . . . . . . . ] (in kfence-Freescale#110): p9_fcall_fini net/9p/client.c:248 [inline] p9_req_put net/9p/client.c:396 [inline] p9_req_put+0x208/0x250 net/9p/client.c:390 p9_client_walk+0x247/0x540 net/9p/client.c:1165 clone_fid fs/9p/fid.h:21 [inline] v9fs_fid_xattr_set+0xe4/0x2b0 fs/9p/xattr.c:118 v9fs_xattr_set fs/9p/xattr.c:100 [inline] v9fs_xattr_handler_set+0x6f/0x120 fs/9p/xattr.c:159 __vfs_setxattr+0x119/0x180 fs/xattr.c:182 __vfs_setxattr_noperm+0x129/0x5f0 fs/xattr.c:216 __vfs_setxattr_locked+0x1d3/0x260 fs/xattr.c:277 vfs_setxattr+0x143/0x340 fs/xattr.c:309 setxattr+0x146/0x160 fs/xattr.c:617 path_setxattr+0x197/0x1c0 fs/xattr.c:636 __do_sys_setxattr fs/xattr.c:652 [inline] __se_sys_setxattr fs/xattr.c:648 [inline] __ia32_sys_setxattr+0xc0/0x160 fs/xattr.c:648 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Below is a similar scenario, the scenario in the syzbot log looks more complicated than this one, but this patch can fix it. T21124 p9_read_work ======================== second trans ================================= p9_client_walk p9_client_rpc p9_client_prepare_req p9_tag_alloc req = kmem_cache_alloc(p9_req_cache, GFP_NOFS); tag = idr_alloc << preempted >> req->tc.tag = tag; /* req->[refcount/tag] == uninitialized */ m->rreq = p9_tag_lookup(m->client, m->rc.tag); /* increments uninitalized refcount */ refcount_set(&req->refcount, 2); /* cb drops one ref */ p9_client_cb(req) /* reader thread drops its ref: request is incorrectly freed */ p9_req_put(req) /* use after free and ref underflow */ p9_req_put(req) To fix it, we can initialize the refcount to zero before add to idr. Link: https://lkml.kernel.org/r/20221201033310.18589-1-schspa@gmail.com Cc: stable@vger.kernel.org # 6.0+ due to 6cda128 ("9p: Drop kref usage") Fixes: 728356d ("9p: Add refcount to p9_req_t") Reported-by: syzbot+8f1060e2aaf8ca55220b@syzkaller.appspotmail.com Signed-off-by: Schspa Shi <schspa@gmail.com> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
otavio
pushed a commit
that referenced
this pull request
Jul 9, 2024
[ Upstream commit 9841991 ] Billy Jheng Bing-Jhong reported a race between __unix_gc() and queue_oob(). __unix_gc() tries to garbage-collect close()d inflight sockets, and then if the socket has MSG_OOB in unix_sk(sk)->oob_skb, GC will drop the reference and set NULL to it locklessly. However, the peer socket still can send MSG_OOB message and queue_oob() can update unix_sk(sk)->oob_skb concurrently, leading NULL pointer dereference. [0] To fix the issue, let's update unix_sk(sk)->oob_skb under the sk_receive_queue's lock and take it everywhere we touch oob_skb. Note that we defer kfree_skb() in manage_oob() to silence lockdep false-positive (See [1]). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page PGD 8000000009f5e067 P4D 8000000009f5e067 PUD 9f5d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc5-00191-gd091e579b864 #110 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events delayed_fput RIP: 0010:skb_dequeue (./include/linux/skbuff.h:2386 ./include/linux/skbuff.h:2402 net/core/skbuff.c:3847) Code: 39 e3 74 3e 8b 43 10 48 89 ef 83 e8 01 89 43 10 49 8b 44 24 08 49 c7 44 24 08 00 00 00 00 49 8b 14 24 49 c7 04 24 00 00 00 00 <48> 89 42 08 48 89 10 e8 e7 c5 42 00 4c 89 e0 5b 5d 41 5c c3 cc cc RSP: 0018:ffffc900001bfd48 EFLAGS: 00000002 RAX: 0000000000000000 RBX: ffff8880088f5ae8 RCX: 00000000361289f9 RDX: 0000000000000000 RSI: 0000000000000206 RDI: ffff8880088f5b00 RBP: ffff8880088f5b00 R08: 0000000000080000 R09: 0000000000000001 R10: 0000000000000003 R11: 0000000000000001 R12: ffff8880056b6a00 R13: ffff8880088f5280 R14: 0000000000000001 R15: ffff8880088f5a80 FS: 0000000000000000(0000) GS:ffff88807dd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000006314000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> unix_release_sock (net/unix/af_unix.c:654) unix_release (net/unix/af_unix.c:1050) __sock_release (net/socket.c:660) sock_close (net/socket.c:1423) __fput (fs/file_table.c:423) delayed_fput (fs/file_table.c:444 (discriminator 3)) process_one_work (kernel/workqueue.c:3259) worker_thread (kernel/workqueue.c:3329 kernel/workqueue.c:3416) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> Modules linked in: CR2: 0000000000000008 Link: https://lore.kernel.org/netdev/a00d3993-c461-43f2-be6d-07259c98509a@rbox.co/ [1] Fixes: 1279f9d ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.") Reported-by: Billy Jheng Bing-Jhong <billy@starlabs.sg> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240516134835.8332-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
flobz
pushed a commit
to flobz/linux-fslc
that referenced
this pull request
Aug 23, 2024
[ Upstream commit 9841991 ] Billy Jheng Bing-Jhong reported a race between __unix_gc() and queue_oob(). __unix_gc() tries to garbage-collect close()d inflight sockets, and then if the socket has MSG_OOB in unix_sk(sk)->oob_skb, GC will drop the reference and set NULL to it locklessly. However, the peer socket still can send MSG_OOB message and queue_oob() can update unix_sk(sk)->oob_skb concurrently, leading NULL pointer dereference. [0] To fix the issue, let's update unix_sk(sk)->oob_skb under the sk_receive_queue's lock and take it everywhere we touch oob_skb. Note that we defer kfree_skb() in manage_oob() to silence lockdep false-positive (See [1]). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page PGD 8000000009f5e067 P4D 8000000009f5e067 PUD 9f5d067 PMD 0 Oops: 0002 [Freescale#1] PREEMPT SMP PTI CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc5-00191-gd091e579b864 Freescale#110 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events delayed_fput RIP: 0010:skb_dequeue (./include/linux/skbuff.h:2386 ./include/linux/skbuff.h:2402 net/core/skbuff.c:3847) Code: 39 e3 74 3e 8b 43 10 48 89 ef 83 e8 01 89 43 10 49 8b 44 24 08 49 c7 44 24 08 00 00 00 00 49 8b 14 24 49 c7 04 24 00 00 00 00 <48> 89 42 08 48 89 10 e8 e7 c5 42 00 4c 89 e0 5b 5d 41 5c c3 cc cc RSP: 0018:ffffc900001bfd48 EFLAGS: 00000002 RAX: 0000000000000000 RBX: ffff8880088f5ae8 RCX: 00000000361289f9 RDX: 0000000000000000 RSI: 0000000000000206 RDI: ffff8880088f5b00 RBP: ffff8880088f5b00 R08: 0000000000080000 R09: 0000000000000001 R10: 0000000000000003 R11: 0000000000000001 R12: ffff8880056b6a00 R13: ffff8880088f5280 R14: 0000000000000001 R15: ffff8880088f5a80 FS: 0000000000000000(0000) GS:ffff88807dd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000006314000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> unix_release_sock (net/unix/af_unix.c:654) unix_release (net/unix/af_unix.c:1050) __sock_release (net/socket.c:660) sock_close (net/socket.c:1423) __fput (fs/file_table.c:423) delayed_fput (fs/file_table.c:444 (discriminator 3)) process_one_work (kernel/workqueue.c:3259) worker_thread (kernel/workqueue.c:3329 kernel/workqueue.c:3416) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> Modules linked in: CR2: 0000000000000008 Link: https://lore.kernel.org/netdev/a00d3993-c461-43f2-be6d-07259c98509a@rbox.co/ [1] Fixes: 1279f9d ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.") Reported-by: Billy Jheng Bing-Jhong <billy@starlabs.sg> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240516134835.8332-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Notes to upgrade, following merge conflicts were resolved:
v5.4.61:
drivers/xen/swiotlb-xen.c:Port upstream commit cca58a1 to NXP tree, manual hunk was resolved during merge.
Build and boot tested on imx8mmevk, result - Pass.
-- andrey