ultimaker_pc_white.xml.fdm_material

<?xml version="1.0" encoding="UTF-8"?>
<!--
Generic PC profile. The data in this file may not be correct for your specific machine.
-->
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>PC</material>
            <color>White</color>
        </name>
        <GUID>5e786b05-a620-4a87-92d0-f02becc1ff98</GUID>
        <version>1</version>
        <color_code>#ecece7</color_code>
        <description>Generic PC profile. The data in this file may not be correct for your specific machine.</description>
        <adhesion_info>Set your print speed to a low value (10mm/sec) to get better layer bonding</adhesion_info>
    </metadata>
    <properties>
        <density>1.19</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
        <setting key="print temperature">270</setting>
        <setting key="heated bed temperature">107</setting>
        <setting key="standby temperature">175</setting>

        <machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 2+"/>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 2 Extended+"/>
            <setting key="hardware compatible">yes</setting>

            <hotend id="0.25 mm" />
            <hotend id="0.4 mm" />
            <hotend id="0.6 mm" />
            <hotend id="0.8 mm" />
        </machine>

        <machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
            <hotend id="BB 0.4" />
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
                <setting key="print cooling">0</setting>
                <setting key="retraction amount">8</setting>
                <setting key="retraction speed">35</setting>
            </hotend>
            <hotend id="BB 0.8" />
            <hotend id="AA 0.8">
                <setting key="hardware compatible">yes</setting>
            </hotend>
        </machine>

    </settings>
</fdmmaterial>