ultimaker_tpu_red.xml.fdm_material

<?xml version="1.0" encoding="UTF-8"?>
<!--
Generic TPU 95A profile. The data in this file may not be correct for your specific machine.
-->
<fdmmaterial xmlns="http://www.ultimaker.com/material">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>TPU 95A</material>
            <color>Red</color>
        </name>
        <GUID>07a4547f-d21f-41a0-8eee-bc92125221b3</GUID>
        <version>1</version>
        <color_code>#a63437</color_code>
    </metadata>
    <properties>
        <density>1.22</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="hardware compatible">no</setting><!-- This material is not supported on most printers due to high temperatures -->
        <setting key="print temperature">228</setting>
        <setting key="heated bed temperature">0</setting>
        <setting key="standby temperature">175</setting>

        <machine>
            <machine_identifier manufacturer="Ultimaker" product="Ultimaker 2+"/>
            <machine_identifier manufacturer="Ultimaker" product="Ultimaker 2 Extended+"/>
            <setting key="hardware compatible">yes</setting>

            <hotend id="0.25 mm" />
            <hotend id="0.4 mm" />
            <hotend id="0.6 mm" />
            <hotend id="0.8 mm">
                <setting key="hardware compatible">no</setting>
            </hotend>
        </machine>

        <machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
            <hotend id="BB 0.4" />
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
                <setting key="print cooling">20</setting>
                <setting key="retraction speed">35</setting>
            </hotend>
            <hotend id="BB 0.8" />
            <hotend id="AA 0.8">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction speed">45</setting>
                <setting key="print cooling">50</setting>
            </hotend>
        </machine>
    </settings>
</fdmmaterial>