ultimaker_nylon_transparent.xml.fdm_material

<?xml version="1.0" encoding="UTF-8"?>
<!--
Generic Nylon profile. Serves as an example file, data in this file is not correct.
-->
<fdmmaterial xmlns="http://www.ultimaker.com/material">
    <metadata>
        <name>
            <brand>Ultimaker</brand>
            <material>Nylon</material>
            <color>Transparent</color>
        </name>
        <GUID>e256615d-a04e-4f53-b311-114b90560af9</GUID>
        <version>1</version>
        <color_code>#d0d0d0</color_code>
    </metadata>
    <properties>
        <density>1.14</density>
        <diameter>2.85</diameter>
    </properties>
    <settings>
        <setting key="print temperature">245</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">175</setting>
        <setting key="retraction amount">8</setting>
        <setting key="retraction speed">25</setting>

        <machine>
            <machine_identifier manufacturer="Ultimaker" product="Ultimaker 2+"/>
            <machine_identifier manufacturer="Ultimaker" product="Ultimaker 2 Extended+"/>

            <hotend id="0.25 mm" />
            <hotend id="0.4 mm" />
            <hotend id="0.6 mm" />
            <hotend id="0.8 mm" />
        </machine>

        <machine>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3"/>
            <machine_identifier manufacturer="Ultimaker B.V." product="Ultimaker 3 Extended"/>
            <setting key="print cooling">40</setting>
            <hotend id="BB 0.4" />
            <hotend id="BB 0.8" />
            <hotend id="AA 0.25">
                <setting key="hardware compatible">yes</setting>
            </hotend>
            <hotend id="AA 0.4">
                <setting key="hardware compatible">yes</setting>
            </hotend>
            <hotend id="AA 0.8">
                <setting key="hardware compatible">yes</setting>
                <setting key="retraction speed">45</setting>
            </hotend>
        </machine>
    </settings>
</fdmmaterial>