id_ID.ts

/**
 * amCharts 4 locale
 *
 * Locale: id_ID
 * Language: Indonesian
 * Author: Bjorn Svensson
 *
 * Follow instructions in [on this page](https://www.amcharts.com/docs/v4/tutorials/creating-translations/) to make corrections or add new translations.
 *
 * ---
 * Edit but leave the header section above this line. You can remove any
 * subsequent comment sections.
 * ---
 *
 * Use this file as a template to create translations. Leave the key part in
 * English intact. Fill the value with a translation.
 *
 * Empty string means no translation, so default "International English"
 * will be used.
 *
 * If you need the translation to literally be an empty string, use `null`
 * instead.
 *
 * IMPORTANT:
 * When translating make good effort to keep the translation length
 * at least the same chartcount as the English, especially for short prompts.
 *
 * Having significantly longer prompts may distort the actual charts.
 *
 * NOTE:
 * Some prompts - like months or weekdays - come in two versions: full and
 * shortened.
 *
 * If there's no official shortened version of these in your language, and it
 * would not be possible to invent such short versions that don't seem weird
 * to native speakers of that language, fill those with the same as full
 * version.
 *
 * PLACEHOLDERS:
 * Some prompts have placeholders like "%1". Those will be replaced by actual
 * values during translation and should be retained in the translated prompts.
 *
 * Placeholder positions may be changed to better suit structure of the
 * sentence.
 *
 * For example "From %1 to %2", when actually used will replace "%1" with an
 * actual value representing range start, and "%2" will be replaced by end
 * value.
 *
 * E.g. in a Scrollbar for Value axis "From %1 to %2" will become
 * "From 100 to 200". You may translate "From" and "to", as well as re-arrange
 * the order of the prompt itself, but make sure the "%1" and "%2" remain, in
 * places where they will make sense.
 *
 * Save the file as language_LOCALE, i.e. `en_GB.ts`, `fr_FR.ts`, etc.
 */
export default {
  // Number formatting options.
  //
  // Please check with the local standards which separator is accepted to be
  // used for separating decimals, and which for thousands.
  "_decimalSeparator": ",",
  "_thousandSeparator": ".",

  // Suffixes for numbers
  // When formatting numbers, big or small numers might be reformatted to
  // shorter version, by applying a suffix.
  //
  // For example, 1000000 might become "1m".
  // Or 1024 might become "1KB" if we're formatting byte numbers.
  //
  // This section defines such suffixes for all such cases.
  "_big_number_suffix_3": "k",
  "_big_number_suffix_6": "M",
  "_big_number_suffix_9": "G",
  "_big_number_suffix_12": "T",
  "_big_number_suffix_15": "P",
  "_big_number_suffix_18": "E",
  "_big_number_suffix_21": "Z",
  "_big_number_suffix_24": "Y",

  "_small_number_suffix_3": "m",
  "_small_number_suffix_6": "μ",
  "_small_number_suffix_9": "n",
  "_small_number_suffix_12": "p",
  "_small_number_suffix_15": "f",
  "_small_number_suffix_18": "a",
  "_small_number_suffix_21": "z",
  "_small_number_suffix_24": "y",

  "_byte_suffix_B": "B",
  "_byte_suffix_KB": "KB",
  "_byte_suffix_MB": "MB",
  "_byte_suffix_GB": "GB",
  "_byte_suffix_TB": "TB",
  "_byte_suffix_PB": "PB",

  // Default date formats for various periods.
  //
  // This should reflect official or de facto formatting universally accepted
  // in the country translation is being made for
  // Available format codes here:
  // https://www.amcharts.com/docs/v4/concepts/formatters/formatting-date-time/#Format_codes
  //
  // This will be used when formatting date/time for particular granularity,
  // e.g. "_date_hour" will be shown whenever we need to show time as hours.
  "_date_millisecond": "mm:ss SSS",
  "_date_second": "HH:mm:ss",
  "_date_minute": "HH:mm",
  "_date_hour": "HH:mm",
  "_date_day": "MMM dd",
  "_date_week": "ww",
  "_date_month": "MMM",
  "_date_year": "yyyy",

  // Default duration formats for various base units.
  //
  // This will be used by DurationFormatter to format numeric values into
  // duration.
  //
  // Notice how each duration unit comes in several versions. This is to ensure
  // that each base unit is shown correctly.
  //
  // For example, if we have baseUnit set to "second", meaning our duration is
  // in seconds.
  //
  // If we pass in `50` to formatter, it will know that we have just 50 seconds
  // (less than a minute) so it will use format in `"_duration_second"` ("ss"),
  // and the formatted result will be in like `"50"`.
  //
  // If we pass in `70`, which is more than a minute, the formatter will switch
  // to `"_duration_second_minute"` ("mm:ss"), resulting in "01:10" formatted
  // text.
  //
  // Available codes here:
  // https://www.amcharts.com/docs/v4/concepts/formatters/formatting-duration/#Available_Codes
  "_duration_millisecond": "SSS",
  "_duration_millisecond_second": "ss.SSS",
  "_duration_millisecond_minute": "mm:ss SSS",
  "_duration_millisecond_hour": "hh:mm:ss SSS",
  "_duration_millisecond_day": "d'd' mm:ss SSS",
  "_duration_millisecond_week": "d'd' mm:ss SSS",
  "_duration_millisecond_month": "M'm' dd'd' mm:ss SSS",
  "_duration_millisecond_year": "y'y' MM'm' dd'd' mm:ss SSS",

  "_duration_second": "ss",
  "_duration_second_minute": "mm:ss",
  "_duration_second_hour": "hh:mm:ss",
  "_duration_second_day": "d'd' hh:mm:ss",
  "_duration_second_week": "d'd' hh:mm:ss",
  "_duration_second_month": "M'm' dd'd' hh:mm:ss",
  "_duration_second_year": "y'y' MM'm' dd'd' hh:mm:ss",

  "_duration_minute": "mm",
  "_duration_minute_hour": "hh:mm",
  "_duration_minute_day": "d'd' hh:mm",
  "_duration_minute_week": "d'd' hh:mm",
  "_duration_minute_month": "M'm' dd'd' hh:mm",
  "_duration_minute_year": "y'y' MM'm' dd'd' hh:mm",

  "_duration_hour": "hh'h'",
  "_duration_hour_day": "d'd' hh'h'",
  "_duration_hour_week": "d'd' hh'h'",
  "_duration_hour_month": "M'm' dd'd' hh'h'",
  "_duration_hour_year": "y'y' MM'm' dd'd' hh'h'",

  "_duration_day": "d'd'",
  "_duration_day_week": "d'd'",
  "_duration_day_month": "M'm' dd'd'",
  "_duration_day_year": "y'y' MM'm' dd'd'",

  "_duration_week": "w'w'",
  "_duration_week_month": "w'w'",
  "_duration_week_year": "w'w'",

  "_duration_month": "M'm'",
  "_duration_month_year": "y'y' MM'm'",

  "_duration_year": "y'y'",

  // Era translations
  "_era_ad": "M",
  "_era_bc": "SM",

  // Day part, used in 12-hour formats, e.g. 5 P.M.
  // Please note that these come in 3 variants:
  // * one letter (e.g. "A")
  // * two letters (e.g. "AM")
  // * two letters with dots (e.g. "A.M.")
  //
  // All three need to to be translated even if they are all the same. Some
  // users might use one, some the other.
  "A": "AM",
  "P": "PM",
  "AM": "AM",
  "PM": "PM",
  "A.M.": "AM",
  "P.M.": "PM",

  // Date-related stuff.
  //
  // When translating months, if there's a difference, use the form which is
  // best for a full date, e.g. as you would use it in "2018 January 1".
  //
  // Note that May is listed twice. This is because in English May is the same
  // in both long and short forms, while in other languages it may not be the
  // case. Translate "May" to full word, while "May(short)" to shortened
  // version.
  //
  // Should month names and weekdays be capitalized or not?
  //
  // Rule of thumb is this: if the names should always be capitalized,
  // regardless of name position within date ("January", "21st January 2018",
  // etc.) use capitalized names. Otherwise enter all lowercase.
  //
  // The date formatter will automatically capitalize names if they are the
  // first (or only) word in resulting date.
  "January": "Januari",
  "February": "Februari",
  "March": "Maret",
  "April": "April",
  "May": "Mei",
  "June": "Juni",
  "July": "Juli",
  "August": "Agustus",
  "September": "September",
  "October": "Oktober",
  "November": "November",
  "December": "Desember",
  "Jan": "Jan",
  "Feb": "Feb",
  "Mar": "Mar",
  "Apr": "Apr",
  "May(short)": "Mei",
  "Jun": "Jun",
  "Jul": "Jul",
  "Aug": "Agu",
  "Sep": "Sep",
  "Oct": "Okt",
  "Nov": "Nov",
  "Dec": "Des",

  // Weekdays.
  "Sunday": "Minggu",
  "Monday": "Senin",
  "Tuesday": "Selasa",
  "Wednesday": "Rabu",
  "Thursday": "Kamis",
  "Friday": "Jumat",
  "Saturday": "Sabtu",
  "Sun": "Min",
  "Mon": "Sen",
  "Tue": "Sel",
  "Wed": "Rab",
  "Thu": "Kam",
  "Fri": "Jum",
  "Sat": "Sab",

  // Date ordinal function.
  //
  // This is used when adding number ordinal when formatting days in dates.
  //
  // E.g. "January 1st", "February 2nd".
  //
  // The function accepts day number, and returns a string to be added to the
  // day, like in default English translation, if we pass in 2, we will receive
  // "nd" back.
  "_dateOrd": function(day: number): string {
    let res = "th";
    if ((day < 11) || (day > 13)) {
      switch (day % 10) {
        case 1:
          res = "st";
          break;
        case 2:
          res = "nd";
          break;
        case 3:
          res = "rd"
          break;
      }
    }
    return res;
  },

  // Various chart controls.
  // Shown as a tooltip on zoom out button.
  "Zoom Out": "Perkecil",

  // Timeline buttons
  "Play": "Putar",
  "Stop": "Hentikan",

  // Chart's Legend screen reader title.
  "Legend": "Legenda",

  // Legend's item screen reader indicator.
  "Click, tap or press ENTER to toggle": "Klik, ketuk atau tekan ENTER untuk beralih",

  // Shown when the chart is busy loading something.
  "Loading": "Memuat",

  // Shown as the first button in the breadcrumb navigation, e.g.:
  // Home > First level > ...
  "Home": "Beranda",

  // Chart types.
  // Those are used as default screen reader titles for the main chart element
  // unless developer has set some more descriptive title.
  "Chart": "",
  "Serial chart": "",
  "X/Y chart": "",
  "Pie chart": "",
  "Gauge chart": "",
  "Radar chart": "",
  "Sankey diagram": "",
  "Flow diagram": "",
  "Chord diagram": "",
  "TreeMap chart": "",
  "Sliced chart": "",

  // Series types.
  // Used to name series by type for screen readers if they do not have their
  // name set.
  "Series": "",
  "Candlestick Series": "",
  "OHLC Series": "",
  "Column Series": "",
  "Line Series": "",
  "Pie Slice Series": "",
  "Funnel Series": "",
  "Pyramid Series": "",
  "X/Y Series": "",

  // Map-related stuff.
  "Map": "Peta",
  "Press ENTER to zoom in": "Tekan ENTER untuk memperbesar",
  "Press ENTER to zoom out": "Tekan ENTER untuk memperkecil",
  "Use arrow keys to zoom in and out": "Gunakan tombol panah untuk memperbesar dan memperkecil",
  "Use plus and minus keys on your keyboard to zoom in and out": "Gunakan tombol plus dan minus pada keyboard Anda untuk memperbesar dan memperkecil",

  // Export-related stuff.
  // These prompts are used in Export menu labels.
  //
  // "Export" is the top-level menu item.
  //
  // "Image", "Data", "Print" as second-level indicating type of export
  // operation.
  //
  // Leave actual format untranslated, unless you absolutely know that they
  // would convey more meaning in some other way.
  "Export": "Cetak",
  "Image": "Gambar",
  "Data": "Data",
  "Print": "Cetak",
  "Click, tap or press ENTER to open": "Klik, ketuk atau tekan ENTER untuk membuka",
  "Click, tap or press ENTER to print.": "Klik, ketuk atau tekan ENTER untuk mencetak",
  "Click, tap or press ENTER to export as %1.": "Klik, ketuk atau tekan ENTER untuk mengekspor sebagai %1",
  'To save the image, right-click this link and choose "Save picture as..."': 'Untuk menyimpan gambar, klik kanan tautan ini dan pilih "Simpan gambar sebagai"',
  'To save the image, right-click thumbnail on the left and choose "Save picture as..."': "",
  "(Press ESC to close this message)": "Tekan ESC untuk menutup pesan ini",
  "Image Export Complete": "Ekspor gambar selesai",
  "Export operation took longer than expected. Something might have gone wrong.": "",
  "Saved from": "",
  "PNG": "",
  "JPG": "",
  "GIF": "",
  "SVG": "",
  "PDF": "",
  "JSON": "",
  "CSV": "",
  "XLSX": "",

  // Scrollbar-related stuff.
  //
  // Scrollbar is a control which can zoom and pan the axes on the chart.
  //
  // Each scrollbar has two grips: left or right (for horizontal scrollbar) or
  // upper and lower (for vertical one).
  //
  // Prompts change in relation to whether Scrollbar is vertical or horizontal.
  //
  // The final section is used to indicate the current range of selection.
  "Use TAB to select grip buttons or left and right arrows to change selection": "",
  "Use left and right arrows to move selection": "",
  "Use left and right arrows to move left selection": "",
  "Use left and right arrows to move right selection": "",
  "Use TAB select grip buttons or up and down arrows to change selection": "",
  "Use up and down arrows to move selection": "",
  "Use up and down arrows to move lower selection": "",
  "Use up and down arrows to move upper selection": "",
  "From %1 to %2": "Dari %1 ke %2",
  "From %1": "Dari %1",
  "To %1": "Ke %1",

  // Data loader-related.
  "No parser available for file: %1": "",
  "Error parsing file: %1": "",
  "Unable to load file: %1": "",
  "Invalid date": "",
};