Replies: 2 comments 1 reply
-
Actually you could implement a ESP32-S3 1.91inch AMOLED Display Development Board. https://www.waveshare.com/esp32-s3-amoled-1.91.htm And combine this with some foot switches akin to the project below . |
Beta Was this translation helpful? Give feedback.
-
I actually have a simple 2 footswitch pedal running on my pedal board. Just an off the shelf one with 6.5mm jack, connected to the Waveshare digital inputs. This is in the standard release for the display version. That amoled board doesn't apper to be suitable. To support USB OTG it needs to provide 5v power out of the USB port. That one looks to have a diode that prevents that. There are certainly plenty of options here though. Pedalino might be able to have this code integrated into it directly, if the OTG part is OK |
Beta Was this translation helpful? Give feedback.
-
Would be great if you could combine this project with a DIY midi foot controller so it could be in one unit, actually the switches wouldnt need to send midi messages just the messages the tonex one undersands over the USB
Beta Was this translation helpful? Give feedback.
All reactions