Erae Touch

Bitwig controller extension for the Erae Touch.

Prerequisites

• Bitwig Studio >= 4.3
• Erae Firmware >= 1.2.0

Installation

1. Disconnect the Erae Touch from your computer
2. Download the latest EraeTouch.bwextension file from this repository
3. Open Bitwig Studio and go to Settings -> Controllers
4. Drag and drop the EraeTouch.bwextension file onto Settings -> Controllers
5. Connect the Erae Touch to your computer
6. Click on the newly detected "Embodme Erae Touch" controller entry
7. Your Erae Touch should now be ready to use

Configuration

Normally the Erae Touch should be automatically detected and require no further configuration. However, in the case this does not happen, set the following configuration MIDI input options:

1. Set MIDI input 1 to "Erae Touch MIDI"
2. Set MIDI input 2 to "Erae Touch MIDI (MPE)"
3. Set MIDI output 1 to "Erae Touch MIDI"

The MPE section can be left with the default settings:

• Send initialization messages: Yes
• Pitch Bend Range: 48