can: mcp251x: add support for mcp25625

Fully compatible with mcp2515, the mcp25625 have integrated transceiver.

This patch adds support for the mcp25625 to the existing mcp251x driver.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/spi/Kconfig

@@ -9,9 +9,10 @@ config CAN_HI311X
 	  Driver for the Holt HI311x SPI CAN controllers.
 
 config CAN_MCP251X
-	tristate "Microchip MCP251x SPI CAN controllers"
+	tristate "Microchip MCP251x and MCP25625 SPI CAN controllers"
 	depends on HAS_DMA
 	---help---
-	  Driver for the Microchip MCP251x SPI CAN controllers.
+	  Driver for the Microchip MCP251x and MCP25625 SPI CAN
+	  controllers.
 
 endmenu

drivers/net/can/spi/mcp251x.c

@@ -1,5 +1,5 @@
 /*
- * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
+ * CAN bus driver for Microchip 251x/25625 CAN Controller with SPI Interface
  *
  * MCP2510 support and bug fixes by Christian Pellegrin
  * <chripell@evolware.org>
@@ -41,7 +41,7 @@
  * static struct spi_board_info spi_board_info[] = {
  *         {
  *                 .modalias = "mcp2510",
- *			// or "mcp2515" depending on your controller
+ *			// "mcp2515" or "mcp25625" depending on your controller
  *                 .platform_data = &mcp251x_info,
  *                 .irq = IRQ_EINT13,
  *                 .max_speed_hz = 2*1000*1000,
@@ -238,6 +238,7 @@ static const struct can_bittiming_const mcp251x_bittiming_const = {
 enum mcp251x_model {
 	CAN_MCP251X_MCP2510	= 0x2510,
 	CAN_MCP251X_MCP2515	= 0x2515,
+	CAN_MCP251X_MCP25625	= 0x25625,
 };
 
 struct mcp251x_priv {
@@ -280,7 +281,6 @@ static inline int mcp251x_is_##_model(struct spi_device *spi) \
 }
 
 MCP251X_IS(2510);
-MCP251X_IS(2515);
 
 static void mcp251x_clean(struct net_device *net)
 {
@@ -639,7 +639,7 @@ static int mcp251x_hw_reset(struct spi_device *spi)
 
 	/* Wait for oscillator startup timer after reset */
 	mdelay(MCP251X_OST_DELAY_MS);
-	
+
 	reg = mcp251x_read_reg(spi, CANSTAT);
 	if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
 		return -ENODEV;
@@ -820,9 +820,8 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
 		/* receive buffer 0 */
 		if (intf & CANINTF_RX0IF) {
 			mcp251x_hw_rx(spi, 0);
-			/*
-			 * Free one buffer ASAP
-			 * (The MCP2515 does this automatically.)
+			/* Free one buffer ASAP
+			 * (The MCP2515/25625 does this automatically.)
 			 */
 			if (mcp251x_is_2510(spi))
 				mcp251x_write_bits(spi, CANINTF, CANINTF_RX0IF, 0x00);
@@ -831,7 +830,7 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
 		/* receive buffer 1 */
 		if (intf & CANINTF_RX1IF) {
 			mcp251x_hw_rx(spi, 1);
-			/* the MCP2515 does this automatically */
+			/* The MCP2515/25625 does this automatically. */
 			if (mcp251x_is_2510(spi))
 				clear_intf |= CANINTF_RX1IF;
 		}
@@ -1006,6 +1005,10 @@ static const struct of_device_id mcp251x_of_match[] = {
 		.compatible	= "microchip,mcp2515",
 		.data		= (void *)CAN_MCP251X_MCP2515,
 	},
+	{
+		.compatible	= "microchip,mcp25625",
+		.data		= (void *)CAN_MCP251X_MCP25625,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mcp251x_of_match);
@@ -1019,6 +1022,10 @@ static const struct spi_device_id mcp251x_id_table[] = {
 		.name		= "mcp2515",
 		.driver_data	= (kernel_ulong_t)CAN_MCP251X_MCP2515,
 	},
+	{
+		.name		= "mcp25625",
+		.driver_data	= (kernel_ulong_t)CAN_MCP251X_MCP25625,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
@@ -1259,5 +1266,5 @@ module_spi_driver(mcp251x_can_driver);
 
 MODULE_AUTHOR("Chris Elston <celston@katalix.com>, "
 	      "Christian Pellegrin <chripell@evolware.org>");
-MODULE_DESCRIPTION("Microchip 251x CAN driver");
+MODULE_DESCRIPTION("Microchip 251x/25625 CAN driver");
 MODULE_LICENSE("GPL v2");