DART v5 + iommu/next dependencies #3

svenpeter42 · 2021-08-08T16:00:28Z

This pulls in a required series from iommu/next and the v5 upstream DART submission

The io-pgtable code expects to operate on a single block or granule of memory that is supported by the IOMMU hardware when unmapping memory. This means that when a large buffer that consists of multiple such blocks is unmapped, the io-pgtable code will walk the page tables to the correct level to unmap each block, even for blocks that are virtually contiguous and at the same level, which can incur an overhead in performance. Introduce the unmap_pages() page table op to express to the io-pgtable code that it should unmap a number of blocks of the same size, instead of a single block. Doing so allows multiple blocks to be unmapped in one call to the io-pgtable code, reducing the number of page table walks, and indirect calls. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Link: https://lore.kernel.org/r/1623850736-389584-2-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Add a callback for IOMMU drivers to provide a path for the IOMMU framework to call into an IOMMU driver, which can call into the io-pgtable code, to unmap a virtually contiguous range of pages of the same size. For IOMMU drivers that do not specify an unmap_pages() callback, the existing logic of unmapping memory one page block at a time will be used. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Link: https://lore.kernel.org/r/1623850736-389584-3-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Mapping memory into io-pgtables follows the same semantics that unmapping memory used to follow (i.e. a buffer will be mapped one page block per call to the io-pgtable code). This means that it can be optimized in the same way that unmapping memory was, so add a map_pages() callback to the io-pgtable ops structure, so that a range of pages of the same size can be mapped within the same call. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Link: https://lore.kernel.org/r/1623850736-389584-4-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Add a callback for IOMMU drivers to provide a path for the IOMMU framework to call into an IOMMU driver, which can call into the io-pgtable code, to map a physically contiguous rnage of pages of the same size. For IOMMU drivers that do not specify a map_pages() callback, the existing logic of mapping memory one page block at a time will be used. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Suggested-by: Will Deacon <will@kernel.org> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Link: https://lore.kernel.org/r/1623850736-389584-5-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Avoid the potential for shifting values by amounts greater than the width of their type by using a bitmap to compute page size in iommu_pgsize(). Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1623850736-389584-6-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

The 'addr_merge' parameter to iommu_pgsize() is a fabricated address intended to describe the alignment requirements to consider when choosing an appropriate page size. On the iommu_map() path, this address is the logical OR of the virtual and physical addresses. Subsequent improvements to iommu_pgsize() will need to check the alignment of the virtual and physical components of 'addr_merge' independently, so pass them in as separate parameters and reconstruct 'addr_merge' locally. No functional change. Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1623850736-389584-7-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Extend iommu_pgsize() to populate an optional 'count' parameter so that we can direct unmapping operation to the ->unmap_pages callback if it has been provided by the driver. Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1623850736-389584-8-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Since iommu_pgsize can calculate how many pages of the same size can be mapped/unmapped before the next largest page size boundary, add support for invoking an IOMMU driver's map_pages() callback, if it provides one. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1623850736-389584-9-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

The PTE methods currently operate on a single entry. In preparation for manipulating multiple PTEs in one map or unmap call, allow them to handle multiple PTEs. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Link: https://lore.kernel.org/r/1623850736-389584-10-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Implement the unmap_pages() callback for the ARM LPAE io-pgtable format. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Link: https://lore.kernel.org/r/1623850736-389584-11-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Implement the map_pages() callback for the ARM LPAE io-pgtable format. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Link: https://lore.kernel.org/r/1623850736-389584-12-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Implement the unmap_pages() callback for the ARM v7s io-pgtable format. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Link: https://lore.kernel.org/r/1623850736-389584-13-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Implement the map_pages() callback for the ARM v7s io-pgtable format. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Link: https://lore.kernel.org/r/1623850736-389584-14-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Implement the unmap_pages() callback for the ARM SMMU driver to allow calls from iommu_unmap to unmap multiple pages of the same size in one call. Also, remove the unmap() callback for the SMMU driver, as it will no longer be used. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Link: https://lore.kernel.org/r/1623850736-389584-15-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Implement the map_pages() callback for the ARM SMMU driver to allow calls from iommu_map to map multiple pages of the same size in one call. Also, remove the map() callback for the ARM SMMU driver, as it will no longer be used. Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Link: https://lore.kernel.org/r/1623850736-389584-16-git-send-email-quic_c_gdjako@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Apple's DART iommu uses a pagetable format that shares some similarities with the ones already implemented by io-pgtable.c. Add a new format variant to support the required differences so that we don't have to duplicate the pagetable handling code. Reviewed-by: Alexander Graf <graf@amazon.com> Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Sven Peter <sven@svenpeter.dev>

DART (Device Address Resolution Table) is the iommu found on Apple ARM SoCs such as the M1. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by: Sven Peter <sven@svenpeter.dev>

Apple's new SoCs use iommus for almost all peripherals. These Device Address Resolution Tables must be setup before these peripherals can act as DMA masters. Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Sven Peter <sven@svenpeter.dev>

Signed-off-by: Sven Peter <sven@svenpeter.dev>

The third power supply had an I2C address conflict with another device in the system. The device will have the address changed from 6Ah to 6Dh. Signed-off-by: B. J. Wyman <bjwyman@gmail.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210610202940.3650554-1-bjwyman@gmail.com Fixes: d66d720 ("ARM: dts: aspeed: everest: Add power supply i2c devices") Signed-off-by: Joel Stanley <joel@jms.id.au>

The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ AsahiLinux#3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 13ff178 ("fbcon: Call fbcon_mode_deleted/new_modelist directly") Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712085544.2828-1-thunder.leizhen@huawei.com

…linux/kernel/git/joel/bmc into arm/fixes ASPEED device tree fixes for 5.14 - eMMC phase corrections so Tacoma and Everest can boot - VUART irq polarity fix for e3c246d4i, using new bindings - I2C address fix for Rainier power supply - GPIO line name fixes * tag 'aspeed-5.14-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: everest: PSU AsahiLinux#3 address change ARM: dts: everest: Add phase corrections for eMMC ARM: dts: tacoma: Add phase corrections for eMMC ARM: dts: aspeed: Update e3c246d4i vuart properties ARM: dts: aspeed: Fix AST2600 machines line names Link: https://lore.kernel.org/r/CACPK8XefdPzeOUDnDgk9cHQEs-9wF_ZSPdYQRzuNOpGZTyGUKQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>

At btrfs_qgroup_trace_extent_post() we call btrfs_find_all_roots() with a NULL value as the transaction handle argument, which makes that function take the commit_root_sem semaphore, which is necessary when we don't hold a transaction handle or any other mechanism to prevent a transaction commit from wiping out commit roots. However btrfs_qgroup_trace_extent_post() can be called in a context where we are holding a write lock on an extent buffer from a subvolume tree, namely from btrfs_truncate_inode_items(), called either during truncate or unlink operations. In this case we end up with a lock inversion problem because the commit_root_sem is a higher level lock, always supposed to be acquired before locking any extent buffer. Lockdep detects this lock inversion problem since we switched the extent buffer locks from custom locks to semaphores, and when running btrfs/158 from fstests, it reported the following trace: [ 9057.626435] ====================================================== [ 9057.627541] WARNING: possible circular locking dependency detected [ 9057.628334] 5.14.0-rc2-btrfs-next-93 #1 Not tainted [ 9057.628961] ------------------------------------------------------ [ 9057.629867] kworker/u16:4/30781 is trying to acquire lock: [ 9057.630824] ffff8e2590f58760 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.632542] but task is already holding lock: [ 9057.633551] ffff8e25582d4b70 (&fs_info->commit_root_sem){++++}-{3:3}, at: iterate_extent_inodes+0x10b/0x280 [btrfs] [ 9057.635255] which lock already depends on the new lock. [ 9057.636292] the existing dependency chain (in reverse order) is: [ 9057.637240] -> #1 (&fs_info->commit_root_sem){++++}-{3:3}: [ 9057.638138] down_read+0x46/0x140 [ 9057.638648] btrfs_find_all_roots+0x41/0x80 [btrfs] [ 9057.639398] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs] [ 9057.640283] btrfs_add_delayed_data_ref+0x418/0x490 [btrfs] [ 9057.641114] btrfs_free_extent+0x35/0xb0 [btrfs] [ 9057.641819] btrfs_truncate_inode_items+0x424/0xf70 [btrfs] [ 9057.642643] btrfs_evict_inode+0x454/0x4f0 [btrfs] [ 9057.643418] evict+0xcf/0x1d0 [ 9057.643895] do_unlinkat+0x1e9/0x300 [ 9057.644525] do_syscall_64+0x3b/0xc0 [ 9057.645110] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 9057.645835] -> #0 (btrfs-tree-00){++++}-{3:3}: [ 9057.646600] __lock_acquire+0x130e/0x2210 [ 9057.647248] lock_acquire+0xd7/0x310 [ 9057.647773] down_read_nested+0x4b/0x140 [ 9057.648350] __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.649175] btrfs_read_lock_root_node+0x31/0x40 [btrfs] [ 9057.650010] btrfs_search_slot+0x537/0xc00 [btrfs] [ 9057.650849] scrub_print_warning_inode+0x89/0x370 [btrfs] [ 9057.651733] iterate_extent_inodes+0x1e3/0x280 [btrfs] [ 9057.652501] scrub_print_warning+0x15d/0x2f0 [btrfs] [ 9057.653264] scrub_handle_errored_block.isra.0+0x135f/0x1640 [btrfs] [ 9057.654295] scrub_bio_end_io_worker+0x101/0x2e0 [btrfs] [ 9057.655111] btrfs_work_helper+0xf8/0x400 [btrfs] [ 9057.655831] process_one_work+0x247/0x5a0 [ 9057.656425] worker_thread+0x55/0x3c0 [ 9057.656993] kthread+0x155/0x180 [ 9057.657494] ret_from_fork+0x22/0x30 [ 9057.658030] other info that might help us debug this: [ 9057.659064] Possible unsafe locking scenario: [ 9057.659824] CPU0 CPU1 [ 9057.660402] ---- ---- [ 9057.660988] lock(&fs_info->commit_root_sem); [ 9057.661581] lock(btrfs-tree-00); [ 9057.662348] lock(&fs_info->commit_root_sem); [ 9057.663254] lock(btrfs-tree-00); [ 9057.663690] *** DEADLOCK *** [ 9057.664437] 4 locks held by kworker/u16:4/30781: [ 9057.665023] #0: ffff8e25922a1148 ((wq_completion)btrfs-scrub){+.+.}-{0:0}, at: process_one_work+0x1c7/0x5a0 [ 9057.666260] #1: ffffabb3451ffe70 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x1c7/0x5a0 [ 9057.667639] #2: ffff8e25922da198 (&ret->mutex){+.+.}-{3:3}, at: scrub_handle_errored_block.isra.0+0x5d2/0x1640 [btrfs] [ 9057.669017] AsahiLinux#3: ffff8e25582d4b70 (&fs_info->commit_root_sem){++++}-{3:3}, at: iterate_extent_inodes+0x10b/0x280 [btrfs] [ 9057.670408] stack backtrace: [ 9057.670976] CPU: 7 PID: 30781 Comm: kworker/u16:4 Not tainted 5.14.0-rc2-btrfs-next-93 #1 [ 9057.672030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 9057.673492] Workqueue: btrfs-scrub btrfs_work_helper [btrfs] [ 9057.674258] Call Trace: [ 9057.674588] dump_stack_lvl+0x57/0x72 [ 9057.675083] check_noncircular+0xf3/0x110 [ 9057.675611] __lock_acquire+0x130e/0x2210 [ 9057.676132] lock_acquire+0xd7/0x310 [ 9057.676605] ? __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.677313] ? lock_is_held_type+0xe8/0x140 [ 9057.677849] down_read_nested+0x4b/0x140 [ 9057.678349] ? __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.679068] __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 9057.679760] btrfs_read_lock_root_node+0x31/0x40 [btrfs] [ 9057.680458] btrfs_search_slot+0x537/0xc00 [btrfs] [ 9057.681083] ? _raw_spin_unlock+0x29/0x40 [ 9057.681594] ? btrfs_find_all_roots_safe+0x11f/0x140 [btrfs] [ 9057.682336] scrub_print_warning_inode+0x89/0x370 [btrfs] [ 9057.683058] ? btrfs_find_all_roots_safe+0x11f/0x140 [btrfs] [ 9057.683834] ? scrub_write_block_to_dev_replace+0xb0/0xb0 [btrfs] [ 9057.684632] iterate_extent_inodes+0x1e3/0x280 [btrfs] [ 9057.685316] scrub_print_warning+0x15d/0x2f0 [btrfs] [ 9057.685977] ? ___ratelimit+0xa4/0x110 [ 9057.686460] scrub_handle_errored_block.isra.0+0x135f/0x1640 [btrfs] [ 9057.687316] scrub_bio_end_io_worker+0x101/0x2e0 [btrfs] [ 9057.688021] btrfs_work_helper+0xf8/0x400 [btrfs] [ 9057.688649] ? lock_is_held_type+0xe8/0x140 [ 9057.689180] process_one_work+0x247/0x5a0 [ 9057.689696] worker_thread+0x55/0x3c0 [ 9057.690175] ? process_one_work+0x5a0/0x5a0 [ 9057.690731] kthread+0x155/0x180 [ 9057.691158] ? set_kthread_struct+0x40/0x40 [ 9057.691697] ret_from_fork+0x22/0x30 Fix this by making btrfs_find_all_roots() never attempt to lock the commit_root_sem when it is called from btrfs_qgroup_trace_extent_post(). We can't just pass a non-NULL transaction handle to btrfs_find_all_roots() from btrfs_qgroup_trace_extent_post(), because that would make backref lookup not use commit roots and acquire read locks on extent buffers, and therefore could deadlock when btrfs_qgroup_trace_extent_post() is called from the btrfs_truncate_inode_items() code path which has acquired a write lock on an extent buffer of the subvolume btree. CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

The ordering of MSI-X enable in hardware is dysfunctional: 1) MSI-X is disabled in the control register 2) Various setup functions 3) pci_msi_setup_msi_irqs() is invoked which ends up accessing the MSI-X table entries 4) MSI-X is enabled and masked in the control register with the comment that enabling is required for some hardware to access the MSI-X table Step #4 obviously contradicts #3. The history of this is an issue with the NIU hardware. When #4 was introduced the table access actually happened in msix_program_entries() which was invoked after enabling and masking MSI-X. This was changed in commit d71d643 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") which removed the table write from msix_program_entries(). Interestingly enough nobody noticed and either NIU still works or it did not get any testing with a kernel 3.19 or later. Nevertheless this is inconsistent and there is no reason why MSI-X can't be enabled and masked in the control register early on, i.e. move step #4 above to step #1. This preserves the NIU workaround and has no side effects on other hardware. Fixes: d71d643 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.344136412@linutronix.de

Recent changes exposed a bug where specifically-timed requests to the path manager netlink API could trigger a divide-by-zero in __tcp_select_window(), as syzkaller does: divide error: 0000 [#1] SMP KASAN NOPTI CPU: 0 PID: 9667 Comm: syz-executor.0 Not tainted 5.14.0-rc6+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:__tcp_select_window+0x509/0xa60 net/ipv4/tcp_output.c:3016 Code: 44 89 ff e8 c9 29 e9 fd 45 39 e7 0f 8d 20 ff ff ff e8 db 28 e9 fd 44 89 e3 e9 13 ff ff ff e8 ce 28 e9 fd 44 89 e0 44 89 e3 99 <f7> 7c 24 04 29 d3 e9 fc fe ff ff e8 b7 28 e9 fd 44 89 f1 48 89 ea RSP: 0018:ffff888031ccf020 EFLAGS: 00010216 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000040000 RDX: 0000000000000000 RSI: ffff88811532c080 RDI: 0000000000000002 RBP: 0000000000000000 R08: ffffffff835807c2 R09: 0000000000000000 R10: 0000000000000004 R11: ffffed1020b92441 R12: 0000000000000000 R13: 1ffff11006399e08 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fa4c8344700(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2f424000 CR3: 000000003e4e2003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: tcp_select_window net/ipv4/tcp_output.c:264 [inline] __tcp_transmit_skb+0xc00/0x37a0 net/ipv4/tcp_output.c:1351 __tcp_send_ack.part.0+0x3ec/0x760 net/ipv4/tcp_output.c:3972 __tcp_send_ack net/ipv4/tcp_output.c:3978 [inline] tcp_send_ack+0x7d/0xa0 net/ipv4/tcp_output.c:3978 mptcp_pm_nl_addr_send_ack+0x1ab/0x380 net/mptcp/pm_netlink.c:654 mptcp_pm_remove_addr+0x161/0x200 net/mptcp/pm.c:58 mptcp_nl_remove_id_zero_address+0x197/0x460 net/mptcp/pm_netlink.c:1328 mptcp_nl_cmd_del_addr+0x98b/0xd40 net/mptcp/pm_netlink.c:1359 genl_family_rcv_msg_doit.isra.0+0x225/0x340 net/netlink/genetlink.c:731 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x341/0x5b0 net/netlink/genetlink.c:792 netlink_rcv_skb+0x148/0x430 net/netlink/af_netlink.c:2504 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x537/0x750 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x846/0xd80 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0x14e/0x190 net/socket.c:724 ____sys_sendmsg+0x709/0x870 net/socket.c:2403 ___sys_sendmsg+0xff/0x170 net/socket.c:2457 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae mptcp_pm_nl_addr_send_ack() was attempting to send a TCP ACK on the first subflow in the MPTCP socket's connection list without validating that the subflow was in a suitable connection state. To address this, always validate subflow state when sending extra ACKs on subflows for address advertisement or subflow priority change. Fixes: 84dfe36 ("mptcp: send out dedicated ADD_ADDR packet") Closes: multipath-tcp/mptcp_net-next#229 Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Patch series "kasan: test: avoid crashing the kernel with HW_TAGS", v2. KASAN tests do out-of-bounds and use-after-free accesses. Running the tests works fine for the GENERIC mode, as it uses qurantine and redzones. But the HW_TAGS mode uses neither, and running the tests might crash the kernel. Rework the tests to avoid corrupting kernel memory. This patch (of 8): Rework kmalloc_oob_right() to do these bad access checks: 1. An unaligned access one byte past the requested kmalloc size (can only be detected by KASAN_GENERIC). 2. An aligned access into the first out-of-bounds granule that falls within the aligned kmalloc object. 3. Out-of-bounds access past the aligned kmalloc object. Test #3 deliberately uses a read access to avoid corrupting memory. Otherwise, this test might lead to crashes with the HW_TAGS mode, as it neither uses quarantine nor redzones. Link: https://lkml.kernel.org/r/cover.1628779805.git.andreyknvl@gmail.com Link: https://lkml.kernel.org/r/474aa8b7b538c6737a4c6d0090350af2e1776bef.1628779805.git.andreyknvl@gmail.com Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/memory_hotplug: "auto-movable" online policy and memory groups", v3. I. Goal The goal of this series is improving in-kernel auto-online support. It tackles the fundamental problems that: 1) We can create zone imbalances when onlining all memory blindly to ZONE_MOVABLE, in the worst case crashing the system. We have to know upfront how much memory we are going to hotplug such that we can safely enable auto-onlining of all hotplugged memory to ZONE_MOVABLE via "online_movable". This is far from practical and only applicable in limited setups -- like inside VMs under the RHV/oVirt hypervisor which will never hotplug more than 3 times the boot memory (and the limitation is only in place due to the Linux limitation). 2) We see more setups that implement dynamic VM resizing, hot(un)plugging memory to resize VM memory. In these setups, we might hotplug a lot of memory, but it might happen in various small steps in both directions (e.g., 2 GiB -> 8 GiB -> 4 GiB -> 16 GiB ...). virtio-mem is the primary driver of this upstream right now, performing such dynamic resizing NUMA-aware via multiple virtio-mem devices. Onlining all hotplugged memory to ZONE_NORMAL means we basically have no hotunplug guarantees. Onlining all to ZONE_MOVABLE means we can easily run into zone imbalances when growing a VM. We want a mixture, and we want as much memory as reasonable/configured in ZONE_MOVABLE. Details regarding zone imbalances can be found at [1]. 3) Memory devices consist of 1..X memory block devices, however, the kernel doesn't really track the relationship. Consequently, also user space has no idea. We want to make per-device decisions. As one example, for memory hotunplug it doesn't make sense to use a mixture of zones within a single DIMM: we want all MOVABLE if possible, otherwise all !MOVABLE, because any !MOVABLE part will easily block the whole DIMM from getting hotunplugged. As another example, virtio-mem operates on individual units that span 1..X memory blocks. Similar to a DIMM, we want a unit to either be all MOVABLE or !MOVABLE. A "unit" can be thought of like a DIMM, however, all units of a virtio-mem device logically belong together and are managed (added/removed) by a single driver. We want as much memory of a virtio-mem device to be MOVABLE as possible. 4) We want memory onlining to be done right from the kernel while adding memory, not triggered by user space via udev rules; for example, this is reqired for fast memory hotplug for drivers that add individual memory blocks, like virito-mem. We want a way to configure a policy in the kernel and avoid implementing advanced policies in user space. The auto-onlining support we have in the kernel is not sufficient. All we have is a) online everything MOVABLE (online_movable) b) online everything !MOVABLE (online_kernel) c) keep zones contiguous (online). This series allows configuring c) to mean instead "online movable if possible according to the coniguration, driven by a maximum MOVABLE:KERNEL ratio" -- a new onlining policy. II. Approach This series does 3 things: 1) Introduces the "auto-movable" online policy that initially operates on individual memory blocks only. It uses a maximum MOVABLE:KERNEL ratio to make a decision whether a memory block will be onlined to ZONE_MOVABLE or not. However, in the basic form, hotplugged KERNEL memory does not allow for more MOVABLE memory (details in the patches). CMA memory is treated like MOVABLE memory. 2) Introduces static (e.g., DIMM) and dynamic (e.g., virtio-mem) memory groups and uses group information to make decisions in the "auto-movable" online policy across memory blocks of a single memory device (modeled as memory group). More details can be found in patch #3 or in the DIMM example below. 3) Maximizes ZONE_MOVABLE memory within dynamic memory groups, by allowing ZONE_NORMAL memory within a dynamic memory group to allow for more ZONE_MOVABLE memory within the same memory group. The target use case is dynamic VM resizing using virtio-mem. See the virtio-mem example below. I remember that the basic idea of using a ratio to implement a policy in the kernel was once mentioned by Vitaly Kuznetsov, but I might be wrong (I lost the pointer to that discussion). For me, the main use case is using it along with virtio-mem (and DIMMs / ppc64 dlpar where necessary) for dynamic resizing of VMs, increasing the amount of memory we can hotunplug reliably again if we might eventually hotplug a lot of memory to a VM. III. Target Usage The target usage will be: 1) Linux boots with "mhp_default_online_type=offline" 2) User space (e.g., systemd unit) configures memory onlining (according to a config file and system properties), for example: * Setting memory_hotplug.online_policy=auto-movable * Setting memory_hotplug.auto_movable_ratio=301 * Setting memory_hotplug.auto_movable_numa_aware=true 3) User space enabled auto onlining via "echo online > /sys/devices/system/memory/auto_online_blocks" 4) User space triggers manual onlining of all already-offline memory blocks (go over offline memory blocks and set them to "online") IV. Example For DIMMs, hotplugging 4 GiB DIMMs to a 4 GiB VM with a configured ratio of 301% results in the following layout: Memory block 0-15: DMA32 (early) Memory block 32-47: Normal (early) Memory block 48-79: Movable (DIMM 0) Memory block 80-111: Movable (DIMM 1) Memory block 112-143: Movable (DIMM 2) Memory block 144-275: Normal (DIMM 3) Memory block 176-207: Normal (DIMM 4) ... all Normal (-> hotplugged Normal memory does not allow for more Movable memory) For virtio-mem, using a simple, single virtio-mem device with a 4 GiB VM will result in the following layout: Memory block 0-15: DMA32 (early) Memory block 32-47: Normal (early) Memory block 48-143: Movable (virtio-mem, first 12 GiB) Memory block 144: Normal (virtio-mem, next 128 MiB) Memory block 145-147: Movable (virtio-mem, next 384 MiB) Memory block 148: Normal (virtio-mem, next 128 MiB) Memory block 149-151: Movable (virtio-mem, next 384 MiB) ... Normal/Movable mixture as above (-> hotplugged Normal memory allows for more Movable memory within the same device) Which gives us maximum flexibility when dynamically growing/shrinking a VM in smaller steps. V. Doc Update I'll update the memory-hotplug.rst documentation, once the overhaul [1] is usptream. Until then, details can be found in patch #2. VI. Future Work 1) Use memory groups for ppc64 dlpar 2) Being able to specify a portion of (early) kernel memory that will be excluded from the ratio. Like "128 MiB globally/per node" are excluded. This might be helpful when starting VMs with extremely small memory footprint (e.g., 128 MiB) and hotplugging memory later -- not wanting the first hotplugged units getting onlined to ZONE_MOVABLE. One alternative would be a trigger to not consider ZONE_DMA memory in the ratio. We'll have to see if this is really rrequired. 3) Indicate to user space that MOVABLE might be a bad idea -- especially relevant when memory ballooning without support for balloon compaction is active. This patch (of 9): For implementing a new memory onlining policy, which determines when to online memory blocks to ZONE_MOVABLE semi-automatically, we need the number of present early (boot) pages -- present pages excluding hotplugged pages. Let's track these pages per zone. Pass a page instead of the zone to adjust_present_page_count(), similar as adjust_managed_page_count() and derive the zone from the page. It's worth noting that a memory block to be offlined/onlined is either completely "early" or "not early". add_memory() and friends can only add complete memory blocks and we only online/offline complete (individual) memory blocks. Link: https://lkml.kernel.org/r/20210806124715.17090-1-david@redhat.com Link: https://lkml.kernel.org/r/20210806124715.17090-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marek Kedzierski <mkedzier@redhat.com> Cc: Hui Zhu <teawater@gmail.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Rapoport <rppt@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

We update the ctime/mtime of a block device when we remove it so that blkid knows the device changed. However we do this by re-opening the block device and calling filp_update_time. This is more correct because it'll call the inode->i_op->update_time if it exists, but the block dev inodes do not do this. Instead call generic_update_time() on the bd_inode in order to avoid the blkdev_open path and get rid of the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc2+ torvalds#406 Not tainted ------------------------------------------------------ losetup/11596 is trying to acquire lock: ffff939640d2f538 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0 but task is already holding lock: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&lo->lo_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 lo_open+0x28/0x60 [loop] blkdev_get_whole+0x25/0xf0 blkdev_get_by_dev.part.0+0x168/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x161/0x390 path_openat+0x3cc/0xa20 do_filp_open+0x96/0x120 do_sys_openat2+0x7b/0x130 __x64_sys_openat+0x46/0x70 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (&disk->open_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 blkdev_get_by_dev.part.0+0x56/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x161/0x390 path_openat+0x3cc/0xa20 do_filp_open+0x96/0x120 file_open_name+0xc7/0x170 filp_open+0x2c/0x50 btrfs_scratch_superblocks.part.0+0x10f/0x170 btrfs_rm_device.cold+0xe8/0xed btrfs_ioctl+0x2a31/0x2e70 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#12){.+.+}-{0:0}: lo_write_bvec+0xc2/0x240 [loop] loop_process_work+0x238/0xd00 [loop] process_one_work+0x26b/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: process_one_work+0x245/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 flush_workqueue+0x91/0x5e0 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 1 lock held by losetup/11596: #0: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] stack backtrace: CPU: 1 PID: 11596 Comm: losetup Not tainted 5.14.0-rc2+ torvalds#406 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack_lvl+0x57/0x72 check_noncircular+0xcf/0xf0 ? stack_trace_save+0x3b/0x50 __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 ? flush_workqueue+0x67/0x5e0 ? lockdep_init_map_type+0x47/0x220 flush_workqueue+0x91/0x5e0 ? flush_workqueue+0x67/0x5e0 ? verify_cpu+0xf0/0x100 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] ? blkdev_ioctl+0x8d/0x2a0 block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

This commit addresses a circular locking dependency issue within the GFX isolation mechanism. The problem was identified by a warning indicating a potential deadlock due to inconsistent lock acquisition order. - The `amdgpu_gfx_enforce_isolation_ring_begin_use` and `amdgpu_gfx_enforce_isolation_ring_end_use` functions previously acquired `enforce_isolation_mutex` and called `amdgpu_gfx_kfd_sch_ctrl`, leading to potential deadlocks. ie., If `amdgpu_gfx_kfd_sch_ctrl` is called while `enforce_isolation_mutex` is held, and `amdgpu_gfx_enforce_isolation_handler` is called while `kfd_sch_mutex` is held, it can create a circular dependency. By ensuring consistent lock usage, this fix resolves the issue: [ 606.297333] ====================================================== [ 606.297343] WARNING: possible circular locking dependency detected [ 606.297353] 6.10.0-amd-mlkd-610-311224-lof #19 Tainted: G OE [ 606.297365] ------------------------------------------------------ [ 606.297375] kworker/u96:3/3825 is trying to acquire lock: [ 606.297385] ffff9aa64e431cb8 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}, at: __flush_work+0x232/0x610 [ 606.297413] but task is already holding lock: [ 606.297423] ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.297725] which lock already depends on the new lock. [ 606.297738] the existing dependency chain (in reverse order) is: [ 606.297749] -> #2 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}: [ 606.297765] __mutex_lock+0x85/0x930 [ 606.297776] mutex_lock_nested+0x1b/0x30 [ 606.297786] amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.298007] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.298225] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.298412] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.298603] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.298866] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.298880] process_one_work+0x21e/0x680 [ 606.298890] worker_thread+0x190/0x350 [ 606.298899] kthread+0xe7/0x120 [ 606.298908] ret_from_fork+0x3c/0x60 [ 606.298919] ret_from_fork_asm+0x1a/0x30 [ 606.298929] -> #1 (&adev->enforce_isolation_mutex){+.+.}-{3:3}: [ 606.298947] __mutex_lock+0x85/0x930 [ 606.298956] mutex_lock_nested+0x1b/0x30 [ 606.298966] amdgpu_gfx_enforce_isolation_handler+0x87/0x370 [amdgpu] [ 606.299190] process_one_work+0x21e/0x680 [ 606.299199] worker_thread+0x190/0x350 [ 606.299208] kthread+0xe7/0x120 [ 606.299217] ret_from_fork+0x3c/0x60 [ 606.299227] ret_from_fork_asm+0x1a/0x30 [ 606.299236] -> #0 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}: [ 606.299257] __lock_acquire+0x16f9/0x2810 [ 606.299267] lock_acquire+0xd1/0x300 [ 606.299276] __flush_work+0x250/0x610 [ 606.299286] cancel_delayed_work_sync+0x71/0x80 [ 606.299296] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu] [ 606.299509] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.299723] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.299909] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.300101] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.300355] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.300369] process_one_work+0x21e/0x680 [ 606.300378] worker_thread+0x190/0x350 [ 606.300387] kthread+0xe7/0x120 [ 606.300396] ret_from_fork+0x3c/0x60 [ 606.300406] ret_from_fork_asm+0x1a/0x30 [ 606.300416] other info that might help us debug this: [ 606.300428] Chain exists of: (work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work) --> &adev->enforce_isolation_mutex --> &adev->gfx.kfd_sch_mutex [ 606.300458] Possible unsafe locking scenario: [ 606.300468] CPU0 CPU1 [ 606.300476] ---- ---- [ 606.300484] lock(&adev->gfx.kfd_sch_mutex); [ 606.300494] lock(&adev->enforce_isolation_mutex); [ 606.300508] lock(&adev->gfx.kfd_sch_mutex); [ 606.300521] lock((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)); [ 606.300536] *** DEADLOCK *** [ 606.300546] 5 locks held by kworker/u96:3/3825: [ 606.300555] #0: ffff9aa5aa1f5d58 ((wq_completion)comp_1.1.0){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680 [ 606.300577] #1: ffffaa53c3c97e40 ((work_completion)(&sched->work_run_job)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680 [ 606.300600] #2: ffff9aa64e463c98 (&adev->enforce_isolation_mutex){+.+.}-{3:3}, at: amdgpu_gfx_enforce_isolation_ring_begin_use+0x1c3/0x5d0 [amdgpu] [ 606.300837] #3: ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.301062] #4: ffffffff8c1a5660 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x70/0x610 [ 606.301083] stack backtrace: [ 606.301092] CPU: 14 PID: 3825 Comm: kworker/u96:3 Tainted: G OE 6.10.0-amd-mlkd-610-311224-lof #19 [ 606.301109] Hardware name: Gigabyte Technology Co., Ltd. X570S GAMING X/X570S GAMING X, BIOS F7 03/22/2024 [ 606.301124] Workqueue: comp_1.1.0 drm_sched_run_job_work [gpu_sched] [ 606.301140] Call Trace: [ 606.301146] <TASK> [ 606.301154] dump_stack_lvl+0x9b/0xf0 [ 606.301166] dump_stack+0x10/0x20 [ 606.301175] print_circular_bug+0x26c/0x340 [ 606.301187] check_noncircular+0x157/0x170 [ 606.301197] ? register_lock_class+0x48/0x490 [ 606.301213] __lock_acquire+0x16f9/0x2810 [ 606.301230] lock_acquire+0xd1/0x300 [ 606.301239] ? __flush_work+0x232/0x610 [ 606.301250] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.301261] ? mark_held_locks+0x54/0x90 [ 606.301274] ? __flush_work+0x232/0x610 [ 606.301284] __flush_work+0x250/0x610 [ 606.301293] ? __flush_work+0x232/0x610 [ 606.301305] ? __pfx_wq_barrier_func+0x10/0x10 [ 606.301318] ? mark_held_locks+0x54/0x90 [ 606.301331] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.301345] cancel_delayed_work_sync+0x71/0x80 [ 606.301356] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu] [ 606.301661] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.302050] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.302069] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.302452] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.302862] ? drm_sched_entity_error+0x82/0x190 [gpu_sched] [ 606.302890] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.303366] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.303388] process_one_work+0x21e/0x680 [ 606.303409] worker_thread+0x190/0x350 [ 606.303424] ? __pfx_worker_thread+0x10/0x10 [ 606.303437] kthread+0xe7/0x120 [ 606.303449] ? __pfx_kthread+0x10/0x10 [ 606.303463] ret_from_fork+0x3c/0x60 [ 606.303476] ? __pfx_kthread+0x10/0x10 [ 606.303489] ret_from_fork_asm+0x1a/0x30 [ 606.303512] </TASK> v2: Refactor lock handling to resolve circular dependency (Alex) - Introduced a `sched_work` flag to defer the call to `amdgpu_gfx_kfd_sch_ctrl` until after releasing `enforce_isolation_mutex`. - This change ensures that `amdgpu_gfx_kfd_sch_ctrl` is called outside the critical section, preventing the circular dependency and deadlock. - The `sched_work` flag is set within the mutex-protected section if conditions are met, and the actual function call is made afterward. - This approach ensures consistent lock acquisition order. Fixes: afefd6f ("drm/amdgpu: Implement Enforce Isolation Handler for KGD/KFD serialization") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0b6b2dd) Cc: stable@vger.kernel.org

Fix a lockdep warning [1] observed during the write combining test. The warning indicates a potential nested lock scenario that could lead to a deadlock. However, this is a false positive alarm because the SF lock and its parent lock are distinct ones. The lockdep confusion arises because the locks belong to the same object class (i.e., struct mlx5_core_dev). To resolve this, the code has been refactored to avoid taking both locks. Instead, only the parent lock is acquired. [1] raw_ethernet_bw/2118 is trying to acquire lock: [ 213.619032] ffff88811dd75e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.620270] [ 213.620270] but task is already holding lock: [ 213.620943] ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.622045] [ 213.622045] other info that might help us debug this: [ 213.622778] Possible unsafe locking scenario: [ 213.622778] [ 213.623465] CPU0 [ 213.623815] ---- [ 213.624148] lock(&dev->wc_state_lock); [ 213.624615] lock(&dev->wc_state_lock); [ 213.625071] [ 213.625071] *** DEADLOCK *** [ 213.625071] [ 213.625805] May be due to missing lock nesting notation [ 213.625805] [ 213.626522] 4 locks held by raw_ethernet_bw/2118: [ 213.627019] #0: ffff88813f80d578 (&uverbs_dev->disassociate_srcu){.+.+}-{0:0}, at: ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.628088] #1: ffff88810fb23930 (&file->hw_destroy_rwsem){.+.+}-{3:3}, at: ib_init_ucontext+0x2d/0xf0 [ib_uverbs] [ 213.629094] #2: ffff88810fb23878 (&file->ucontext_lock){+.+.}-{3:3}, at: ib_init_ucontext+0x49/0xf0 [ib_uverbs] [ 213.630106] #3: ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.631185] [ 213.631185] stack backtrace: [ 213.631718] CPU: 1 UID: 0 PID: 2118 Comm: raw_ethernet_bw Not tainted 6.12.0-rc7_internal_net_next_mlx5_89a0ad0 #1 [ 213.632722] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 213.633785] Call Trace: [ 213.634099] [ 213.634393] dump_stack_lvl+0x7e/0xc0 [ 213.634806] print_deadlock_bug+0x278/0x3c0 [ 213.635265] __lock_acquire+0x15f4/0x2c40 [ 213.635712] lock_acquire+0xcd/0x2d0 [ 213.636120] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.636722] ? mlx5_ib_enable_lb+0x24/0xa0 [mlx5_ib] [ 213.637277] __mutex_lock+0x81/0xda0 [ 213.637697] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638305] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638902] ? rcu_read_lock_sched_held+0x3f/0x70 [ 213.639400] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640016] mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640615] set_ucontext_resp+0x68/0x2b0 [mlx5_ib] [ 213.641144] ? debug_mutex_init+0x33/0x40 [ 213.641586] mlx5_ib_alloc_ucontext+0x18e/0x7b0 [mlx5_ib] [ 213.642145] ib_init_ucontext+0xa0/0xf0 [ib_uverbs] [ 213.642679] ib_uverbs_handler_UVERBS_METHOD_GET_CONTEXT+0x95/0xc0 [ib_uverbs] [ 213.643426] ? _copy_from_user+0x46/0x80 [ 213.643878] ib_uverbs_cmd_verbs+0xa6b/0xc80 [ib_uverbs] [ 213.644426] ? ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x130/0x130 [ib_uverbs] [ 213.645213] ? __lock_acquire+0xa99/0x2c40 [ 213.645675] ? lock_acquire+0xcd/0x2d0 [ 213.646101] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.646625] ? reacquire_held_locks+0xcf/0x1f0 [ 213.647102] ? do_user_addr_fault+0x45d/0x770 [ 213.647586] ib_uverbs_ioctl+0xe0/0x170 [ib_uverbs] [ 213.648102] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.648632] __x64_sys_ioctl+0x4d3/0xaa0 [ 213.649060] ? do_user_addr_fault+0x4a8/0x770 [ 213.649528] do_syscall_64+0x6d/0x140 [ 213.649947] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 213.650478] RIP: 0033:0x7fa179b0737b [ 213.650893] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 2a 0f 00 f7 d8 64 89 01 48 [ 213.652619] RSP: 002b:00007ffd2e6d46e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 213.653390] RAX: ffffffffffffffda RBX: 00007ffd2e6d47f8 RCX: 00007fa179b0737b [ 213.654084] RDX: 00007ffd2e6d47e0 RSI: 00000000c0181b01 RDI: 0000000000000003 [ 213.654767] RBP: 00007ffd2e6d47c0 R08: 00007fa1799be010 R09: 0000000000000002 [ 213.655453] R10: 00007ffd2e6d4960 R11: 0000000000000246 R12: 00007ffd2e6d487c [ 213.656170] R13: 0000000000000027 R14: 0000000000000001 R15: 00007ffd2e6d4f70 Fixes: d98995b ("net/mlx5: Reimplement write combining test") Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit a216542 ] When COWing a relocation tree path, at relocation.c:replace_path(), we can trigger a lockdep splat while we are in the btrfs_search_slot() call against the relocation root. This happens in that callchain at ctree.c:read_block_for_search() when we happen to find a child extent buffer already loaded through the fs tree with a lockdep class set to the fs tree. So when we attempt to lock that extent buffer through a relocation tree we have to reset the lockdep class to the class for a relocation tree, since a relocation tree has extent buffers that used to belong to a fs tree and may currently be already loaded (we swap extent buffers between the two trees at the end of replace_path()). However we are missing calls to btrfs_maybe_reset_lockdep_class() to reset the lockdep class at ctree.c:read_block_for_search() before we read lock an extent buffer, just like we did for btrfs_search_slot() in commit b40130b ("btrfs: fix lockdep splat with reloc root extent buffers"). So add the missing btrfs_maybe_reset_lockdep_class() calls before the attempts to read lock an extent buffer at ctree.c:read_block_for_search(). The lockdep splat was reported by syzbot and it looks like this: ====================================================== WARNING: possible circular locking dependency detected 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Not tainted ------------------------------------------------------ syz.0.0/5335 is trying to acquire lock: ffff8880545dbc38 (btrfs-tree-01){++++}-{4:4}, at: btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 but task is already holding lock: ffff8880545dba58 (btrfs-treloc-02/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-treloc-02/1){+.+.}-{4:4}: reacquire_held_locks+0x3eb/0x690 kernel/locking/lockdep.c:5374 __lock_release kernel/locking/lockdep.c:5563 [inline] lock_release+0x396/0xa30 kernel/locking/lockdep.c:5870 up_write+0x79/0x590 kernel/locking/rwsem.c:1629 btrfs_force_cow_block+0x14b3/0x1fd0 fs/btrfs/ctree.c:660 btrfs_cow_block+0x371/0x830 fs/btrfs/ctree.c:755 btrfs_search_slot+0xc01/0x3180 fs/btrfs/ctree.c:2153 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 (btrfs-tree-01/1){+.+.}-{4:4}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_write_nested+0xa2/0x220 kernel/locking/rwsem.c:1693 btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 btrfs_init_new_buffer fs/btrfs/extent-tree.c:5052 [inline] btrfs_alloc_tree_block+0x41c/0x1440 fs/btrfs/extent-tree.c:5132 btrfs_force_cow_block+0x526/0x1fd0 fs/btrfs/ctree.c:573 btrfs_cow_block+0x371/0x830 fs/btrfs/ctree.c:755 btrfs_search_slot+0xc01/0x3180 fs/btrfs/ctree.c:2153 btrfs_insert_empty_items+0x9c/0x1a0 fs/btrfs/ctree.c:4351 btrfs_insert_empty_item fs/btrfs/ctree.h:688 [inline] btrfs_insert_inode_ref+0x2bb/0xf80 fs/btrfs/inode-item.c:330 btrfs_rename_exchange fs/btrfs/inode.c:7990 [inline] btrfs_rename2+0xcb7/0x2b90 fs/btrfs/inode.c:8374 vfs_rename+0xbdb/0xf00 fs/namei.c:5067 do_renameat2+0xd94/0x13f0 fs/namei.c:5224 __do_sys_renameat2 fs/namei.c:5258 [inline] __se_sys_renameat2 fs/namei.c:5255 [inline] __x64_sys_renameat2+0xce/0xe0 fs/namei.c:5255 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (btrfs-tree-01){++++}-{4:4}: check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_read_nested+0xb5/0xa50 kernel/locking/rwsem.c:1649 btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 btrfs_tree_read_lock fs/btrfs/locking.h:188 [inline] read_block_for_search+0x718/0xbb0 fs/btrfs/ctree.c:1610 btrfs_search_slot+0x1274/0x3180 fs/btrfs/ctree.c:2237 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: btrfs-tree-01 --> btrfs-tree-01/1 --> btrfs-treloc-02/1 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-treloc-02/1); lock(btrfs-tree-01/1); lock(btrfs-treloc-02/1); rlock(btrfs-tree-01); *** DEADLOCK *** 8 locks held by syz.0.0/5335: #0: ffff88801e3ae420 (sb_writers#13){.+.+}-{0:0}, at: mnt_want_write_file+0x5e/0x200 fs/namespace.c:559 #1: ffff888052c760d0 (&fs_info->reclaim_bgs_lock){+.+.}-{4:4}, at: __btrfs_balance+0x4c2/0x26b0 fs/btrfs/volumes.c:4183 #2: ffff888052c74850 (&fs_info->cleaner_mutex){+.+.}-{4:4}, at: btrfs_relocate_block_group+0x775/0xd90 fs/btrfs/relocation.c:4086 #3: ffff88801e3ae610 (sb_internal#2){.+.+}-{0:0}, at: merge_reloc_root+0xf11/0x1ad0 fs/btrfs/relocation.c:1659 #4: ffff888052c76470 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x405/0xda0 fs/btrfs/transaction.c:288 #5: ffff888052c76498 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x405/0xda0 fs/btrfs/transaction.c:288 #6: ffff8880545db878 (btrfs-tree-01/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 #7: ffff8880545dba58 (btrfs-treloc-02/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 stack backtrace: CPU: 0 UID: 0 PID: 5335 Comm: syz.0.0 Not tainted 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206 check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_read_nested+0xb5/0xa50 kernel/locking/rwsem.c:1649 btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 btrfs_tree_read_lock fs/btrfs/locking.h:188 [inline] read_block_for_search+0x718/0xbb0 fs/btrfs/ctree.c:1610 btrfs_search_slot+0x1274/0x3180 fs/btrfs/ctree.c:2237 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1ac6985d29 Code: ff ff c3 (...) RSP: 002b:00007f1ac63fe038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f1ac6b76160 RCX: 00007f1ac6985d29 RDX: 0000000020000180 RSI: 00000000c4009420 RDI: 0000000000000007 RBP: 00007f1ac6a01b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000001 R14: 00007f1ac6b76160 R15: 00007fffda145a88 </TASK> Reported-by: syzbot+63913e558c084f7f8fdc@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/677b3014.050a0220.3b53b0.0064.GAE@google.com/ Fixes: 9978599 ("btrfs: reduce lock contention when eb cache miss for btree search") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…rary mm [ Upstream commit dc9c516 ] Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13: [ 12.028126] ================================================================== [ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1 [ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty #3 [ 12.028408] Tainted: [T]=RANDSTRUCT [ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV [ 12.028500] Call Trace: [ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable) [ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708 [ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300 [ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370 [ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40 [ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210 [ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590 [ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0 [ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0 [ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930 [ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280 [ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370 [ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00 [ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40 [ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610 [ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280 [ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8 [ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000 [ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty) [ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000 [ 12.029855] IRQMASK: 0 GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005 GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000 GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90 GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80 GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8 GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580 [ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030405] --- interrupt: 3000 [ 12.030444] ================================================================== Commit c28c15b ("powerpc/code-patching: Use temporary mm for Radix MMU") is inspired from x86 but unlike x86 is doesn't disable KASAN reports during patching. This wasn't a problem at the begining because __patch_mem() is not instrumented. Commit 465cabc ("powerpc/code-patching: introduce patch_instructions()") use copy_to_kernel_nofault() to copy several instructions at once. But when using temporary mm the destination is not regular kernel memory but a kind of kernel-like memory located in user address space. Because it is not in kernel address space it is not covered by KASAN shadow memory. Since commit e4137f0 ("mm, kasan, kmsan: instrument copy_from/to_kernel_nofault") KASAN reports bad accesses from copy_to_kernel_nofault(). Here a bad access to user memory is reported because KASAN detects the lack of shadow memory and the address is below TASK_SIZE. Do like x86 in commit b3fd8e8 ("x86/alternatives: Use temporary mm for text poking") and disable KASAN reports during patching when using temporary mm. Reported-by: Erhard Furtner <erhard_f@mailbox.org> Close: https://lore.kernel.org/all/20250201151435.48400261@yea/ Fixes: 465cabc ("powerpc/code-patching: introduce patch_instructions()") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/1c05b2a1b02ad75b981cfc45927e0b4a90441046.1738577687.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>

When COWing a relocation tree path, at relocation.c:replace_path(), we can trigger a lockdep splat while we are in the btrfs_search_slot() call against the relocation root. This happens in that callchain at ctree.c:read_block_for_search() when we happen to find a child extent buffer already loaded through the fs tree with a lockdep class set to the fs tree. So when we attempt to lock that extent buffer through a relocation tree we have to reset the lockdep class to the class for a relocation tree, since a relocation tree has extent buffers that used to belong to a fs tree and may currently be already loaded (we swap extent buffers between the two trees at the end of replace_path()). However we are missing calls to btrfs_maybe_reset_lockdep_class() to reset the lockdep class at ctree.c:read_block_for_search() before we read lock an extent buffer, just like we did for btrfs_search_slot() in commit b40130b ("btrfs: fix lockdep splat with reloc root extent buffers"). So add the missing btrfs_maybe_reset_lockdep_class() calls before the attempts to read lock an extent buffer at ctree.c:read_block_for_search(). The lockdep splat was reported by syzbot and it looks like this: ====================================================== WARNING: possible circular locking dependency detected 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Not tainted ------------------------------------------------------ syz.0.0/5335 is trying to acquire lock: ffff8880545dbc38 (btrfs-tree-01){++++}-{4:4}, at: btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 but task is already holding lock: ffff8880545dba58 (btrfs-treloc-02/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-treloc-02/1){+.+.}-{4:4}: reacquire_held_locks+0x3eb/0x690 kernel/locking/lockdep.c:5374 __lock_release kernel/locking/lockdep.c:5563 [inline] lock_release+0x396/0xa30 kernel/locking/lockdep.c:5870 up_write+0x79/0x590 kernel/locking/rwsem.c:1629 btrfs_force_cow_block+0x14b3/0x1fd0 fs/btrfs/ctree.c:660 btrfs_cow_block+0x371/0x830 fs/btrfs/ctree.c:755 btrfs_search_slot+0xc01/0x3180 fs/btrfs/ctree.c:2153 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 (btrfs-tree-01/1){+.+.}-{4:4}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_write_nested+0xa2/0x220 kernel/locking/rwsem.c:1693 btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 btrfs_init_new_buffer fs/btrfs/extent-tree.c:5052 [inline] btrfs_alloc_tree_block+0x41c/0x1440 fs/btrfs/extent-tree.c:5132 btrfs_force_cow_block+0x526/0x1fd0 fs/btrfs/ctree.c:573 btrfs_cow_block+0x371/0x830 fs/btrfs/ctree.c:755 btrfs_search_slot+0xc01/0x3180 fs/btrfs/ctree.c:2153 btrfs_insert_empty_items+0x9c/0x1a0 fs/btrfs/ctree.c:4351 btrfs_insert_empty_item fs/btrfs/ctree.h:688 [inline] btrfs_insert_inode_ref+0x2bb/0xf80 fs/btrfs/inode-item.c:330 btrfs_rename_exchange fs/btrfs/inode.c:7990 [inline] btrfs_rename2+0xcb7/0x2b90 fs/btrfs/inode.c:8374 vfs_rename+0xbdb/0xf00 fs/namei.c:5067 do_renameat2+0xd94/0x13f0 fs/namei.c:5224 __do_sys_renameat2 fs/namei.c:5258 [inline] __se_sys_renameat2 fs/namei.c:5255 [inline] __x64_sys_renameat2+0xce/0xe0 fs/namei.c:5255 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (btrfs-tree-01){++++}-{4:4}: check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_read_nested+0xb5/0xa50 kernel/locking/rwsem.c:1649 btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 btrfs_tree_read_lock fs/btrfs/locking.h:188 [inline] read_block_for_search+0x718/0xbb0 fs/btrfs/ctree.c:1610 btrfs_search_slot+0x1274/0x3180 fs/btrfs/ctree.c:2237 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: btrfs-tree-01 --> btrfs-tree-01/1 --> btrfs-treloc-02/1 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-treloc-02/1); lock(btrfs-tree-01/1); lock(btrfs-treloc-02/1); rlock(btrfs-tree-01); *** DEADLOCK *** 8 locks held by syz.0.0/5335: #0: ffff88801e3ae420 (sb_writers#13){.+.+}-{0:0}, at: mnt_want_write_file+0x5e/0x200 fs/namespace.c:559 #1: ffff888052c760d0 (&fs_info->reclaim_bgs_lock){+.+.}-{4:4}, at: __btrfs_balance+0x4c2/0x26b0 fs/btrfs/volumes.c:4183 #2: ffff888052c74850 (&fs_info->cleaner_mutex){+.+.}-{4:4}, at: btrfs_relocate_block_group+0x775/0xd90 fs/btrfs/relocation.c:4086 #3: ffff88801e3ae610 (sb_internal#2){.+.+}-{0:0}, at: merge_reloc_root+0xf11/0x1ad0 fs/btrfs/relocation.c:1659 #4: ffff888052c76470 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x405/0xda0 fs/btrfs/transaction.c:288 #5: ffff888052c76498 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x405/0xda0 fs/btrfs/transaction.c:288 #6: ffff8880545db878 (btrfs-tree-01/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 #7: ffff8880545dba58 (btrfs-treloc-02/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 stack backtrace: CPU: 0 UID: 0 PID: 5335 Comm: syz.0.0 Not tainted 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206 check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_read_nested+0xb5/0xa50 kernel/locking/rwsem.c:1649 btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 btrfs_tree_read_lock fs/btrfs/locking.h:188 [inline] read_block_for_search+0x718/0xbb0 fs/btrfs/ctree.c:1610 btrfs_search_slot+0x1274/0x3180 fs/btrfs/ctree.c:2237 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1ac6985d29 Code: ff ff c3 (...) RSP: 002b:00007f1ac63fe038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f1ac6b76160 RCX: 00007f1ac6985d29 RDX: 0000000020000180 RSI: 00000000c4009420 RDI: 0000000000000007 RBP: 00007f1ac6a01b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000001 R14: 00007f1ac6b76160 R15: 00007fffda145a88 </TASK> Reported-by: syzbot+63913e558c084f7f8fdc@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/677b3014.050a0220.3b53b0.0064.GAE@google.com/ Fixes: 9978599 ("btrfs: reduce lock contention when eb cache miss for btree search") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

Since commit 6037802 ("power: supply: core: implement extension API") there is the following ABBA deadlock (simplified) between the LED trigger code and the power-supply code: 1) When registering a power-supply class device, power_supply_register() calls led_trigger_register() from power_supply_create_triggers() in a scoped_guard(rwsem_read, &psy->extensions_sem) context. led_trigger_register() then in turn takes a LED subsystem lock. So here we have the following locking order: * Read-lock extensions_sem * Lock LED subsystem lock(s) 2) When registering a LED class device, with its default trigger set to a power-supply LED trigger (which has already been registered) The LED class code calls power_supply_led_trigger_activate() when setting up the default trigger. power_supply_led_trigger_activate() calls power_supply_get_property() to determine the initial value of to assign to the LED and that read-locks extensions_sem. So now we have the following locking order: * Lock LED subsystem lock(s) * Read-lock extensions_sem Fixing this is easy, there is no need to hold the extensions_sem when calling power_supply_create_triggers() since all triggers are always created rather then checking for the presence of certain attributes as power_supply_add_hwmon_sysfs() does. Move power_supply_create_triggers() out of the guard block to fix this. Here is the lockdep report fixed by this change: [ 31.249343] ====================================================== [ 31.249378] WARNING: possible circular locking dependency detected [ 31.249413] 6.13.0-rc6+ #251 Tainted: G C E [ 31.249440] ------------------------------------------------------ [ 31.249471] (udev-worker)/553 is trying to acquire lock: [ 31.249501] ffff892adbcaf660 (&psy->extensions_sem){.+.+}-{4:4}, at: power_supply_get_property.part.0+0x22/0x150 [ 31.249574] but task is already holding lock: [ 31.249603] ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 [ 31.249657] which lock already depends on the new lock. [ 31.249696] the existing dependency chain (in reverse order) is: [ 31.249735] -> #2 (&led_cdev->trigger_lock){+.+.}-{4:4}: [ 31.249778] down_write+0x3b/0xd0 [ 31.249803] led_trigger_set_default+0x34/0xe0 [ 31.249833] led_classdev_register_ext+0x311/0x3a0 [ 31.249863] input_leds_connect+0x1dc/0x2a0 [ 31.249889] input_attach_handler.isra.0+0x75/0x90 [ 31.249921] input_register_device.cold+0xa1/0x150 [ 31.249955] hidinput_connect+0x8a2/0xb80 [ 31.249982] hid_connect+0x582/0x5c0 [ 31.250007] hid_hw_start+0x3f/0x60 [ 31.250030] hid_device_probe+0x122/0x1f0 [ 31.250053] really_probe+0xde/0x340 [ 31.250080] __driver_probe_device+0x78/0x110 [ 31.250105] driver_probe_device+0x1f/0xa0 [ 31.250132] __device_attach_driver+0x85/0x110 [ 31.250160] bus_for_each_drv+0x78/0xc0 [ 31.250184] __device_attach+0xb0/0x1b0 [ 31.250207] bus_probe_device+0x94/0xb0 [ 31.250230] device_add+0x64a/0x860 [ 31.250252] hid_add_device+0xe5/0x240 [ 31.250279] usbhid_probe+0x4dc/0x620 [ 31.250303] usb_probe_interface+0xe4/0x2a0 [ 31.250329] really_probe+0xde/0x340 [ 31.250353] __driver_probe_device+0x78/0x110 [ 31.250377] driver_probe_device+0x1f/0xa0 [ 31.250404] __device_attach_driver+0x85/0x110 [ 31.250431] bus_for_each_drv+0x78/0xc0 [ 31.250455] __device_attach+0xb0/0x1b0 [ 31.250478] bus_probe_device+0x94/0xb0 [ 31.250501] device_add+0x64a/0x860 [ 31.250523] usb_set_configuration+0x606/0x8a0 [ 31.250552] usb_generic_driver_probe+0x3e/0x60 [ 31.250579] usb_probe_device+0x3d/0x120 [ 31.250605] really_probe+0xde/0x340 [ 31.250629] __driver_probe_device+0x78/0x110 [ 31.250653] driver_probe_device+0x1f/0xa0 [ 31.250680] __device_attach_driver+0x85/0x110 [ 31.250707] bus_for_each_drv+0x78/0xc0 [ 31.250731] __device_attach+0xb0/0x1b0 [ 31.250753] bus_probe_device+0x94/0xb0 [ 31.250776] device_add+0x64a/0x860 [ 31.250798] usb_new_device.cold+0x141/0x38f [ 31.250828] hub_event+0x1166/0x1980 [ 31.250854] process_one_work+0x20f/0x580 [ 31.250879] worker_thread+0x1d1/0x3b0 [ 31.250904] kthread+0xee/0x120 [ 31.250926] ret_from_fork+0x30/0x50 [ 31.250954] ret_from_fork_asm+0x1a/0x30 [ 31.250982] -> #1 (triggers_list_lock){++++}-{4:4}: [ 31.251022] down_write+0x3b/0xd0 [ 31.251045] led_trigger_register+0x40/0x1b0 [ 31.251074] power_supply_register_led_trigger+0x88/0x150 [ 31.251107] power_supply_create_triggers+0x55/0xe0 [ 31.251135] __power_supply_register.part.0+0x34e/0x4a0 [ 31.251164] devm_power_supply_register+0x70/0xc0 [ 31.251190] bq27xxx_battery_setup+0x1a1/0x6d0 [bq27xxx_battery] [ 31.251235] bq27xxx_battery_i2c_probe+0xe5/0x17f [bq27xxx_battery_i2c] [ 31.251272] i2c_device_probe+0x125/0x2b0 [ 31.251299] really_probe+0xde/0x340 [ 31.251324] __driver_probe_device+0x78/0x110 [ 31.251348] driver_probe_device+0x1f/0xa0 [ 31.251375] __driver_attach+0xba/0x1c0 [ 31.251398] bus_for_each_dev+0x6b/0xb0 [ 31.251421] bus_add_driver+0x111/0x1f0 [ 31.251445] driver_register+0x6e/0xc0 [ 31.251470] i2c_register_driver+0x41/0xb0 [ 31.251498] do_one_initcall+0x5e/0x3a0 [ 31.251522] do_init_module+0x60/0x220 [ 31.251550] __do_sys_init_module+0x15f/0x190 [ 31.251575] do_syscall_64+0x93/0x180 [ 31.251598] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.251629] -> #0 (&psy->extensions_sem){.+.+}-{4:4}: [ 31.251668] __lock_acquire+0x13ce/0x21c0 [ 31.251694] lock_acquire+0xcf/0x2e0 [ 31.251719] down_read+0x3e/0x170 [ 31.251741] power_supply_get_property.part.0+0x22/0x150 [ 31.251774] power_supply_update_leds+0x8d/0x230 [ 31.251804] power_supply_led_trigger_activate+0x18/0x20 [ 31.251837] led_trigger_set+0x1fc/0x300 [ 31.251863] led_trigger_set_default+0x90/0xe0 [ 31.251892] led_classdev_register_ext+0x311/0x3a0 [ 31.251921] devm_led_classdev_multicolor_register_ext+0x6e/0xb80 [led_class_multicolor] [ 31.251969] ktd202x_probe+0x464/0x5c0 [leds_ktd202x] [ 31.252002] i2c_device_probe+0x125/0x2b0 [ 31.252027] really_probe+0xde/0x340 [ 31.252052] __driver_probe_device+0x78/0x110 [ 31.252076] driver_probe_device+0x1f/0xa0 [ 31.252103] __driver_attach+0xba/0x1c0 [ 31.252125] bus_for_each_dev+0x6b/0xb0 [ 31.252148] bus_add_driver+0x111/0x1f0 [ 31.252172] driver_register+0x6e/0xc0 [ 31.252197] i2c_register_driver+0x41/0xb0 [ 31.252225] do_one_initcall+0x5e/0x3a0 [ 31.252248] do_init_module+0x60/0x220 [ 31.252274] __do_sys_init_module+0x15f/0x190 [ 31.253986] do_syscall_64+0x93/0x180 [ 31.255826] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.257614] other info that might help us debug this: [ 31.257619] Chain exists of: &psy->extensions_sem --> triggers_list_lock --> &led_cdev->trigger_lock [ 31.257630] Possible unsafe locking scenario: [ 31.257632] CPU0 CPU1 [ 31.257633] ---- ---- [ 31.257634] lock(&led_cdev->trigger_lock); [ 31.257637] lock(triggers_list_lock); [ 31.257640] lock(&led_cdev->trigger_lock); [ 31.257643] rlock(&psy->extensions_sem); [ 31.257646] *** DEADLOCK *** [ 31.289433] 4 locks held by (udev-worker)/553: [ 31.289443] #0: ffff892ad9658108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xaf/0x1c0 [ 31.289463] #1: ffff892adbc0bbc8 (&led_cdev->led_access){+.+.}-{4:4}, at: led_classdev_register_ext+0x1c7/0x3a0 [ 31.289476] #2: ffffffffad0e30b0 (triggers_list_lock){++++}-{4:4}, at: led_trigger_set_default+0x2c/0xe0 [ 31.289487] #3: ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 Fixes: 6037802 ("power: supply: core: implement extension API") Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20250130140035.20636-1-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

…rary mm Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13: [ 12.028126] ================================================================== [ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1 [ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty #3 [ 12.028408] Tainted: [T]=RANDSTRUCT [ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV [ 12.028500] Call Trace: [ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable) [ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708 [ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300 [ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370 [ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40 [ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210 [ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590 [ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0 [ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0 [ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930 [ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280 [ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370 [ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00 [ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40 [ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610 [ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280 [ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8 [ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000 [ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty) [ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000 [ 12.029855] IRQMASK: 0 GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005 GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000 GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90 GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80 GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8 GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580 [ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030405] --- interrupt: 3000 [ 12.030444] ================================================================== Commit c28c15b ("powerpc/code-patching: Use temporary mm for Radix MMU") is inspired from x86 but unlike x86 is doesn't disable KASAN reports during patching. This wasn't a problem at the begining because __patch_mem() is not instrumented. Commit 465cabc ("powerpc/code-patching: introduce patch_instructions()") use copy_to_kernel_nofault() to copy several instructions at once. But when using temporary mm the destination is not regular kernel memory but a kind of kernel-like memory located in user address space. Because it is not in kernel address space it is not covered by KASAN shadow memory. Since commit e4137f0 ("mm, kasan, kmsan: instrument copy_from/to_kernel_nofault") KASAN reports bad accesses from copy_to_kernel_nofault(). Here a bad access to user memory is reported because KASAN detects the lack of shadow memory and the address is below TASK_SIZE. Do like x86 in commit b3fd8e8 ("x86/alternatives: Use temporary mm for text poking") and disable KASAN reports during patching when using temporary mm. Reported-by: Erhard Furtner <erhard_f@mailbox.org> Close: https://lore.kernel.org/all/20250201151435.48400261@yea/ Fixes: 465cabc ("powerpc/code-patching: introduce patch_instructions()") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/1c05b2a1b02ad75b981cfc45927e0b4a90441046.1738577687.git.christophe.leroy@csgroup.eu

We have several places across the kernel where we want to access another task's syscall arguments, such as ptrace(2), seccomp(2), etc., by making a call to syscall_get_arguments(). This works for register arguments right away by accessing the task's `regs' member of `struct pt_regs', however for stack arguments seen with 32-bit/o32 kernels things are more complicated. Technically they ought to be obtained from the user stack with calls to an access_remote_vm(), but we have an easier way available already. So as to be able to access syscall stack arguments as regular function arguments following the MIPS calling convention we copy them over from the user stack to the kernel stack in arch/mips/kernel/scall32-o32.S, in handle_sys(), to the current stack frame's outgoing argument space at the top of the stack, which is where the handler called expects to see its incoming arguments. This area is also pointed at by the `pt_regs' pointer obtained by task_pt_regs(). Make the o32 stack argument space a proper member of `struct pt_regs' then, by renaming the existing member from `pad0' to `args' and using generated offsets to access the space. No functional change though. With the change in place the o32 kernel stack frame layout at the entry to a syscall handler invoked by handle_sys() is therefore as follows: $sp + 68 -> | ... | <- pt_regs.regs[9] +---------------------+ $sp + 64 -> | $t0 | <- pt_regs.regs[8] +---------------------+ $sp + 60 -> | $a3/argument #4 | <- pt_regs.regs[7] +---------------------+ $sp + 56 -> | $a2/argument #3 | <- pt_regs.regs[6] +---------------------+ $sp + 52 -> | $a1/argument #2 | <- pt_regs.regs[5] +---------------------+ $sp + 48 -> | $a0/argument #1 | <- pt_regs.regs[4] +---------------------+ $sp + 44 -> | $v1 | <- pt_regs.regs[3] +---------------------+ $sp + 40 -> | $v0 | <- pt_regs.regs[2] +---------------------+ $sp + 36 -> | $at | <- pt_regs.regs[1] +---------------------+ $sp + 32 -> | $zero | <- pt_regs.regs[0] +---------------------+ $sp + 28 -> | stack argument #8 | <- pt_regs.args[7] +---------------------+ $sp + 24 -> | stack argument #7 | <- pt_regs.args[6] +---------------------+ $sp + 20 -> | stack argument #6 | <- pt_regs.args[5] +---------------------+ $sp + 16 -> | stack argument #5 | <- pt_regs.args[4] +---------------------+ $sp + 12 -> | psABI space for $a3 | <- pt_regs.args[3] +---------------------+ $sp + 8 -> | psABI space for $a2 | <- pt_regs.args[2] +---------------------+ $sp + 4 -> | psABI space for $a1 | <- pt_regs.args[1] +---------------------+ $sp + 0 -> | psABI space for $a0 | <- pt_regs.args[0] +---------------------+ holding user data received and with the first 4 frame slots reserved by the psABI for the compiler to spill the incoming arguments from $a0-$a3 registers (which it sometimes does according to its needs) and the next 4 frame slots designated by the psABI for any stack function arguments that follow. This data is also available for other tasks to peek/poke at as reqired and where permitted. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.14, take #3 - Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout. - Bring back the VMID allocation to the vcpu_load phase, ensuring that we only setup VTTBR_EL2 once on VHE. This cures an ugly race that would lead to running with an unallocated VMID.

commit f02c41f upstream. Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] #4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20 Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250121135833.3769310-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f AsahiLinux#35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] AsahiLinux#2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] AsahiLinux#3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] AsahiLinux#4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f AsahiLinux#35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20 Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250121135833.3769310-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

…cal section A circular lock dependency splat has been seen involving down_trylock(): ====================================================== WARNING: possible circular locking dependency detected 6.12.0-41.el10.s390x+debug ------------------------------------------------------ dd/32479 is trying to acquire lock: 0015a20accd0d4f8 ((console_sem).lock){-.-.}-{2:2}, at: down_trylock+0x26/0x90 but task is already holding lock: 000000017e461698 (&zone->lock){-.-.}-{2:2}, at: rmqueue_bulk+0xac/0x8f0 the existing dependency chain (in reverse order) is: -> AsahiLinux#4 (&zone->lock){-.-.}-{2:2}: -> AsahiLinux#3 (hrtimer_bases.lock){-.-.}-{2:2}: -> AsahiLinux#2 (&rq->__lock){-.-.}-{2:2}: -> #1 (&p->pi_lock){-.-.}-{2:2}: -> #0 ((console_sem).lock){-.-.}-{2:2}: The console_sem -> pi_lock dependency is due to calling try_to_wake_up() while holding the console_sem raw_spinlock. This dependency can be broken by using wake_q to do the wakeup instead of calling try_to_wake_up() under the console_sem lock. This will also make the semaphore's raw_spinlock become a terminal lock without taking any further locks underneath it. The hrtimer_bases.lock is a raw_spinlock while zone->lock is a spinlock. The hrtimer_bases.lock -> zone->lock dependency happens via the debug_objects_fill_pool() helper function in the debugobjects code. -> AsahiLinux#4 (&zone->lock){-.-.}-{2:2}: __lock_acquire+0xe86/0x1cc0 lock_acquire.part.0+0x258/0x630 lock_acquire+0xb8/0xe0 _raw_spin_lock_irqsave+0xb4/0x120 rmqueue_bulk+0xac/0x8f0 __rmqueue_pcplist+0x580/0x830 rmqueue_pcplist+0xfc/0x470 rmqueue.isra.0+0xdec/0x11b0 get_page_from_freelist+0x2ee/0xeb0 __alloc_pages_noprof+0x2c2/0x520 alloc_pages_mpol_noprof+0x1fc/0x4d0 alloc_pages_noprof+0x8c/0xe0 allocate_slab+0x320/0x460 ___slab_alloc+0xa58/0x12b0 __slab_alloc.isra.0+0x42/0x60 kmem_cache_alloc_noprof+0x304/0x350 fill_pool+0xf6/0x450 debug_object_activate+0xfe/0x360 enqueue_hrtimer+0x34/0x190 __run_hrtimer+0x3c8/0x4c0 __hrtimer_run_queues+0x1b2/0x260 hrtimer_interrupt+0x316/0x760 do_IRQ+0x9a/0xe0 do_irq_async+0xf6/0x160 Normally a raw_spinlock to spinlock dependency is not legitimate and will be warned if CONFIG_PROVE_RAW_LOCK_NESTING is enabled, but debug_objects_fill_pool() is an exception as it explicitly allows this dependency for non-PREEMPT_RT kernel without causing PROVE_RAW_LOCK_NESTING lockdep splat. As a result, this dependency is legitimate and not a bug. Anyway, semaphore is the only locking primitive left that is still using try_to_wake_up() to do wakeup inside critical section, all the other locking primitives had been migrated to use wake_q to do wakeup outside of the critical section. It is also possible that there are other circular locking dependencies involving printk/console_sem or other existing/new semaphores lurking somewhere which may show up in the future. Let just do the migration now to wake_q to avoid headache like this. Reported-by: yzbot+ed801a886dfdbfe7136d@syzkaller.appspotmail.com Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250307232717.1759087-3-boqun.feng@gmail.com

When mb-xdp is set and return is XDP_PASS, packet is converted from xdp_buff to sk_buff with xdp_update_skb_shared_info() in bnxt_xdp_build_skb(). bnxt_xdp_build_skb() passes incorrect truesize argument to xdp_update_skb_shared_info(). The truesize is calculated as BNXT_RX_PAGE_SIZE * sinfo->nr_frags but the skb_shared_info was wiped by napi_build_skb() before. So it stores sinfo->nr_frags before bnxt_xdp_build_skb() and use it instead of getting skb_shared_info from xdp_get_shared_info_from_buff(). Splat looks like: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at net/core/skbuff.c:6072 skb_try_coalesce+0x504/0x590 Modules linked in: xt_nat xt_tcpudp veth af_packet xt_conntrack nft_chain_nat xt_MASQUERADE nf_conntrack_netlink xfrm_user xt_addrtype nft_coms CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.14.0-rc2+ AsahiLinux#3 RIP: 0010:skb_try_coalesce+0x504/0x590 Code: 4b fd ff ff 49 8b 34 24 40 80 e6 40 0f 84 3d fd ff ff 49 8b 74 24 48 40 f6 c6 01 0f 84 2e fd ff ff 48 8d 4e ff e9 25 fd ff ff <0f> 0b e99 RSP: 0018:ffffb62c4120caa8 EFLAGS: 00010287 RAX: 0000000000000003 RBX: ffffb62c4120cb14 RCX: 0000000000000ec0 RDX: 0000000000001000 RSI: ffffa06e5d7dc000 RDI: 0000000000000003 RBP: ffffa06e5d7ddec0 R08: ffffa06e6120a800 R09: ffffa06e7a119900 R10: 0000000000002310 R11: ffffa06e5d7dcec0 R12: ffffe4360575f740 R13: ffffe43600000000 R14: 0000000000000002 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffffa0755f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f147b76b0f8 CR3: 00000001615d4000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0x84/0x130 ? skb_try_coalesce+0x504/0x590 ? report_bug+0x18a/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? skb_try_coalesce+0x504/0x590 inet_frag_reasm_finish+0x11f/0x2e0 ip_defrag+0x37a/0x900 ip_local_deliver+0x51/0x120 ip_sublist_rcv_finish+0x64/0x70 ip_sublist_rcv+0x179/0x210 ip_list_rcv+0xf9/0x130 How to reproduce: <Node A> ip link set $interface1 xdp obj xdp_pass.o ip link set $interface1 mtu 9000 up ip a a 10.0.0.1/24 dev $interface1 <Node B> ip link set $interfac2 mtu 9000 up ip a a 10.0.0.2/24 dev $interface2 ping 10.0.0.1 -s 65000 Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue. Fixes: 1dc4c55 ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250309134219.91670-2-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 9f7b2aa ] When mb-xdp is set and return is XDP_PASS, packet is converted from xdp_buff to sk_buff with xdp_update_skb_shared_info() in bnxt_xdp_build_skb(). bnxt_xdp_build_skb() passes incorrect truesize argument to xdp_update_skb_shared_info(). The truesize is calculated as BNXT_RX_PAGE_SIZE * sinfo->nr_frags but the skb_shared_info was wiped by napi_build_skb() before. So it stores sinfo->nr_frags before bnxt_xdp_build_skb() and use it instead of getting skb_shared_info from xdp_get_shared_info_from_buff(). Splat looks like: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at net/core/skbuff.c:6072 skb_try_coalesce+0x504/0x590 Modules linked in: xt_nat xt_tcpudp veth af_packet xt_conntrack nft_chain_nat xt_MASQUERADE nf_conntrack_netlink xfrm_user xt_addrtype nft_coms CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.14.0-rc2+ #3 RIP: 0010:skb_try_coalesce+0x504/0x590 Code: 4b fd ff ff 49 8b 34 24 40 80 e6 40 0f 84 3d fd ff ff 49 8b 74 24 48 40 f6 c6 01 0f 84 2e fd ff ff 48 8d 4e ff e9 25 fd ff ff <0f> 0b e99 RSP: 0018:ffffb62c4120caa8 EFLAGS: 00010287 RAX: 0000000000000003 RBX: ffffb62c4120cb14 RCX: 0000000000000ec0 RDX: 0000000000001000 RSI: ffffa06e5d7dc000 RDI: 0000000000000003 RBP: ffffa06e5d7ddec0 R08: ffffa06e6120a800 R09: ffffa06e7a119900 R10: 0000000000002310 R11: ffffa06e5d7dcec0 R12: ffffe4360575f740 R13: ffffe43600000000 R14: 0000000000000002 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffffa0755f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f147b76b0f8 CR3: 00000001615d4000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0x84/0x130 ? skb_try_coalesce+0x504/0x590 ? report_bug+0x18a/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? skb_try_coalesce+0x504/0x590 inet_frag_reasm_finish+0x11f/0x2e0 ip_defrag+0x37a/0x900 ip_local_deliver+0x51/0x120 ip_sublist_rcv_finish+0x64/0x70 ip_sublist_rcv+0x179/0x210 ip_list_rcv+0xf9/0x130 How to reproduce: <Node A> ip link set $interface1 xdp obj xdp_pass.o ip link set $interface1 mtu 9000 up ip a a 10.0.0.1/24 dev $interface1 <Node B> ip link set $interfac2 mtu 9000 up ip a a 10.0.0.2/24 dev $interface2 ping 10.0.0.1 -s 65000 Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue. Fixes: 1dc4c55 ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250309134219.91670-2-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…ate_pagetables' [ Upstream commit fddc450 ] This commit addresses a circular locking dependency in the svm_range_cpu_invalidate_pagetables function. The function previously held a lock while determining whether to perform an unmap or eviction operation, which could lead to deadlocks. Fixes the below: [ 223.418794] ====================================================== [ 223.418820] WARNING: possible circular locking dependency detected [ 223.418845] 6.12.0-amdstaging-drm-next-lol-050225 #14 Tainted: G U OE [ 223.418869] ------------------------------------------------------ [ 223.418889] kfdtest/3939 is trying to acquire lock: [ 223.418906] ffff8957552eae38 (&dqm->lock_hidden){+.+.}-{3:3}, at: evict_process_queues_cpsch+0x43/0x210 [amdgpu] [ 223.419302] but task is already holding lock: [ 223.419303] ffff8957556b83b0 (&prange->lock){+.+.}-{3:3}, at: svm_range_cpu_invalidate_pagetables+0x9d/0x850 [amdgpu] [ 223.419447] Console: switching to colour dummy device 80x25 [ 223.419477] [IGT] amd_basic: executing [ 223.419599] which lock already depends on the new lock. [ 223.419611] the existing dependency chain (in reverse order) is: [ 223.419621] -> #2 (&prange->lock){+.+.}-{3:3}: [ 223.419636] __mutex_lock+0x85/0xe20 [ 223.419647] mutex_lock_nested+0x1b/0x30 [ 223.419656] svm_range_validate_and_map+0x2f1/0x15b0 [amdgpu] [ 223.419954] svm_range_set_attr+0xe8c/0x1710 [amdgpu] [ 223.420236] svm_ioctl+0x46/0x50 [amdgpu] [ 223.420503] kfd_ioctl_svm+0x50/0x90 [amdgpu] [ 223.420763] kfd_ioctl+0x409/0x6d0 [amdgpu] [ 223.421024] __x64_sys_ioctl+0x95/0xd0 [ 223.421036] x64_sys_call+0x1205/0x20d0 [ 223.421047] do_syscall_64+0x87/0x140 [ 223.421056] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 223.421068] -> #1 (reservation_ww_class_mutex){+.+.}-{3:3}: [ 223.421084] __ww_mutex_lock.constprop.0+0xab/0x1560 [ 223.421095] ww_mutex_lock+0x2b/0x90 [ 223.421103] amdgpu_amdkfd_alloc_gtt_mem+0xcc/0x2b0 [amdgpu] [ 223.421361] add_queue_mes+0x3bc/0x440 [amdgpu] [ 223.421623] unhalt_cpsch+0x1ae/0x240 [amdgpu] [ 223.421888] kgd2kfd_start_sched+0x5e/0xd0 [amdgpu] [ 223.422148] amdgpu_amdkfd_start_sched+0x3d/0x50 [amdgpu] [ 223.422414] amdgpu_gfx_enforce_isolation_handler+0x132/0x270 [amdgpu] [ 223.422662] process_one_work+0x21e/0x680 [ 223.422673] worker_thread+0x190/0x330 [ 223.422682] kthread+0xe7/0x120 [ 223.422690] ret_from_fork+0x3c/0x60 [ 223.422699] ret_from_fork_asm+0x1a/0x30 [ 223.422708] -> #0 (&dqm->lock_hidden){+.+.}-{3:3}: [ 223.422723] __lock_acquire+0x16f4/0x2810 [ 223.422734] lock_acquire+0xd1/0x300 [ 223.422742] __mutex_lock+0x85/0xe20 [ 223.422751] mutex_lock_nested+0x1b/0x30 [ 223.422760] evict_process_queues_cpsch+0x43/0x210 [amdgpu] [ 223.423025] kfd_process_evict_queues+0x8a/0x1d0 [amdgpu] [ 223.423285] kgd2kfd_quiesce_mm+0x43/0x90 [amdgpu] [ 223.423540] svm_range_cpu_invalidate_pagetables+0x4a7/0x850 [amdgpu] [ 223.423807] __mmu_notifier_invalidate_range_start+0x1f5/0x250 [ 223.423819] copy_page_range+0x1e94/0x1ea0 [ 223.423829] copy_process+0x172f/0x2ad0 [ 223.423839] kernel_clone+0x9c/0x3f0 [ 223.423847] __do_sys_clone+0x66/0x90 [ 223.423856] __x64_sys_clone+0x25/0x30 [ 223.423864] x64_sys_call+0x1d7c/0x20d0 [ 223.423872] do_syscall_64+0x87/0x140 [ 223.423880] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 223.423891] other info that might help us debug this: [ 223.423903] Chain exists of: &dqm->lock_hidden --> reservation_ww_class_mutex --> &prange->lock [ 223.423926] Possible unsafe locking scenario: [ 223.423935] CPU0 CPU1 [ 223.423942] ---- ---- [ 223.423949] lock(&prange->lock); [ 223.423958] lock(reservation_ww_class_mutex); [ 223.423970] lock(&prange->lock); [ 223.423981] lock(&dqm->lock_hidden); [ 223.423990] *** DEADLOCK *** [ 223.423999] 5 locks held by kfdtest/3939: [ 223.424006] #0: ffffffffb82b4fc0 (dup_mmap_sem){.+.+}-{0:0}, at: copy_process+0x1387/0x2ad0 [ 223.424026] #1: ffff89575eda81b0 (&mm->mmap_lock){++++}-{3:3}, at: copy_process+0x13a8/0x2ad0 [ 223.424046] #2: ffff89575edaf3b0 (&mm->mmap_lock/1){+.+.}-{3:3}, at: copy_process+0x13e4/0x2ad0 [ 223.424066] #3: ffffffffb82e76e0 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: copy_page_range+0x1cea/0x1ea0 [ 223.424088] #4: ffff8957556b83b0 (&prange->lock){+.+.}-{3:3}, at: svm_range_cpu_invalidate_pagetables+0x9d/0x850 [amdgpu] [ 223.424365] stack backtrace: [ 223.424374] CPU: 0 UID: 0 PID: 3939 Comm: kfdtest Tainted: G U OE 6.12.0-amdstaging-drm-next-lol-050225 #14 [ 223.424392] Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 223.424401] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS PRO WIFI/X570 AORUS PRO WIFI, BIOS F36a 02/16/2022 [ 223.424416] Call Trace: [ 223.424423] <TASK> [ 223.424430] dump_stack_lvl+0x9b/0xf0 [ 223.424441] dump_stack+0x10/0x20 [ 223.424449] print_circular_bug+0x275/0x350 [ 223.424460] check_noncircular+0x157/0x170 [ 223.424469] ? __bfs+0xfd/0x2c0 [ 223.424481] __lock_acquire+0x16f4/0x2810 [ 223.424490] ? srso_return_thunk+0x5/0x5f [ 223.424505] lock_acquire+0xd1/0x300 [ 223.424514] ? evict_process_queues_cpsch+0x43/0x210 [amdgpu] [ 223.424783] __mutex_lock+0x85/0xe20 [ 223.424792] ? evict_process_queues_cpsch+0x43/0x210 [amdgpu] [ 223.425058] ? srso_return_thunk+0x5/0x5f [ 223.425067] ? mark_held_locks+0x54/0x90 [ 223.425076] ? evict_process_queues_cpsch+0x43/0x210 [amdgpu] [ 223.425339] ? srso_return_thunk+0x5/0x5f [ 223.425350] mutex_lock_nested+0x1b/0x30 [ 223.425358] ? mutex_lock_nested+0x1b/0x30 [ 223.425367] evict_process_queues_cpsch+0x43/0x210 [amdgpu] [ 223.425631] kfd_process_evict_queues+0x8a/0x1d0 [amdgpu] [ 223.425893] kgd2kfd_quiesce_mm+0x43/0x90 [amdgpu] [ 223.426156] svm_range_cpu_invalidate_pagetables+0x4a7/0x850 [amdgpu] [ 223.426423] ? srso_return_thunk+0x5/0x5f [ 223.426436] __mmu_notifier_invalidate_range_start+0x1f5/0x250 [ 223.426450] copy_page_range+0x1e94/0x1ea0 [ 223.426461] ? srso_return_thunk+0x5/0x5f [ 223.426474] ? srso_return_thunk+0x5/0x5f [ 223.426484] ? lock_acquire+0xd1/0x300 [ 223.426494] ? copy_process+0x1718/0x2ad0 [ 223.426502] ? srso_return_thunk+0x5/0x5f [ 223.426510] ? sched_clock_noinstr+0x9/0x10 [ 223.426519] ? local_clock_noinstr+0xe/0xc0 [ 223.426528] ? copy_process+0x1718/0x2ad0 [ 223.426537] ? srso_return_thunk+0x5/0x5f [ 223.426550] copy_process+0x172f/0x2ad0 [ 223.426569] kernel_clone+0x9c/0x3f0 [ 223.426577] ? __schedule+0x4c9/0x1b00 [ 223.426586] ? srso_return_thunk+0x5/0x5f [ 223.426594] ? sched_clock_noinstr+0x9/0x10 [ 223.426602] ? srso_return_thunk+0x5/0x5f [ 223.426610] ? local_clock_noinstr+0xe/0xc0 [ 223.426619] ? schedule+0x107/0x1a0 [ 223.426629] __do_sys_clone+0x66/0x90 [ 223.426643] __x64_sys_clone+0x25/0x30 [ 223.426652] x64_sys_call+0x1d7c/0x20d0 [ 223.426661] do_syscall_64+0x87/0x140 [ 223.426671] ? srso_return_thunk+0x5/0x5f [ 223.426679] ? common_nsleep+0x44/0x50 [ 223.426690] ? srso_return_thunk+0x5/0x5f [ 223.426698] ? trace_hardirqs_off+0x52/0xd0 [ 223.426709] ? srso_return_thunk+0x5/0x5f [ 223.426717] ? syscall_exit_to_user_mode+0xcc/0x200 [ 223.426727] ? srso_return_thunk+0x5/0x5f [ 223.426736] ? do_syscall_64+0x93/0x140 [ 223.426748] ? srso_return_thunk+0x5/0x5f [ 223.426756] ? up_write+0x1c/0x1e0 [ 223.426765] ? srso_return_thunk+0x5/0x5f [ 223.426775] ? srso_return_thunk+0x5/0x5f [ 223.426783] ? trace_hardirqs_off+0x52/0xd0 [ 223.426792] ? srso_return_thunk+0x5/0x5f [ 223.426800] ? syscall_exit_to_user_mode+0xcc/0x200 [ 223.426810] ? srso_return_thunk+0x5/0x5f [ 223.426818] ? do_syscall_64+0x93/0x140 [ 223.426826] ? syscall_exit_to_user_mode+0xcc/0x200 [ 223.426836] ? srso_return_thunk+0x5/0x5f [ 223.426844] ? do_syscall_64+0x93/0x140 [ 223.426853] ? srso_return_thunk+0x5/0x5f [ 223.426861] ? irqentry_exit+0x6b/0x90 [ 223.426869] ? srso_return_thunk+0x5/0x5f [ 223.426877] ? exc_page_fault+0xa7/0x2c0 [ 223.426888] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 223.426898] RIP: 0033:0x7f46758eab57 [ 223.426906] Code: ba 04 00 f3 0f 1e fa 64 48 8b 04 25 10 00 00 00 45 31 c0 31 d2 31 f6 bf 11 00 20 01 4c 8d 90 d0 02 00 00 b8 38 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 41 89 c0 85 c0 75 2c 64 48 8b 04 25 10 00 [ 223.426930] RSP: 002b:00007fff5c3e5188 EFLAGS: 00000246 ORIG_RAX: 0000000000000038 [ 223.426943] RAX: ffffffffffffffda RBX: 00007f4675f8c040 RCX: 00007f46758eab57 [ 223.426954] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000001200011 [ 223.426965] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 223.426975] R10: 00007f4675e81a50 R11: 0000000000000246 R12: 0000000000000001 [ 223.426986] R13: 00007fff5c3e5470 R14: 00007fff5c3e53e0 R15: 00007fff5c3e5410 [ 223.427004] </TASK> v2: To resolve this issue, the allocation of the process context buffer (`proc_ctx_bo`) has been moved from the `add_queue_mes` function to the `pqm_create_queue` function. This change ensures that the buffer is allocated only when the first queue for a process is created and only if the Micro Engine Scheduler (MES) is enabled. (Felix) v3: Fix typo s/Memory Execution Scheduler (MES)/Micro Engine Scheduler in commit message. (Lijo) Fixes: 438b39a ("drm/amdkfd: pause autosuspend when creating pdd") Cc: Jesse Zhang <jesse.zhang@amd.com> Cc: Yunxiang Li <Yunxiang.Li@amd.com> Cc: Philip Yang <Philip.Yang@amd.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 888751e ] perf test 11 hwmon fails on s390 with this error # ./perf test -Fv 11 --- start --- ---- end ---- 11.1: Basic parsing test : Ok --- start --- Testing 'temp_test_hwmon_event1' Using CPUID IBM,3931,704,A01,3.7,002f temp_test_hwmon_event1 -> hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/ FAILED tests/hwmon_pmu.c:189 Unexpected config for 'temp_test_hwmon_event1', 292470092988416 != 655361 ---- end ---- 11.2: Parsing without PMU name : FAILED! --- start --- Testing 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/' FAILED tests/hwmon_pmu.c:189 Unexpected config for 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/', 292470092988416 != 655361 ---- end ---- 11.3: Parsing with PMU name : FAILED! # The root cause is in member test_event::config which is initialized to 0xA0001 or 655361. During event parsing a long list event parsing functions are called and end up with this gdb call stack: #0 hwmon_pmu__config_term (hwm=0x168dfd0, attr=0x3ffffff5ee8, term=0x168db60, err=0x3ffffff81c8) at util/hwmon_pmu.c:623 #1 hwmon_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, err=0x3ffffff81c8) at util/hwmon_pmu.c:662 #2 0x00000000012f870c in perf_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, zero=false, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1519 #3 0x00000000012f88a4 in perf_pmu__config (pmu=0x168dfd0, attr=0x3ffffff5ee8, head_terms=0x3ffffff5ea8, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1545 #4 0x00000000012680c4 in parse_events_add_pmu (parse_state=0x3ffffff7fb8, list=0x168dc00, pmu=0x168dfd0, const_parsed_terms=0x3ffffff6090, auto_merge_stats=true, alternate_hw_config=10) at util/parse-events.c:1508 #5 0x00000000012684c6 in parse_events_multi_pmu_add (parse_state=0x3ffffff7fb8, event_name=0x168ec10 "temp_test_hwmon_event1", hw_config=10, const_parsed_terms=0x0, listp=0x3ffffff6230, loc_=0x3ffffff70e0) at util/parse-events.c:1592 #6 0x00000000012f0e4e in parse_events_parse (_parse_state=0x3ffffff7fb8, scanner=0x16878c0) at util/parse-events.y:293 #7 0x00000000012695a0 in parse_events__scanner (str=0x3ffffff81d8 "temp_test_hwmon_event1", input=0x0, parse_state=0x3ffffff7fb8) at util/parse-events.c:1867 #8 0x000000000126a1e8 in __parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", pmu_filter=0x0, err=0x3ffffff81c8, fake_pmu=false, warn_if_reordered=true, fake_tp=false) at util/parse-events.c:2136 #9 0x00000000011e36aa in parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", err=0x3ffffff81c8) at /root/linux/tools/perf/util/parse-events.h:41 #10 0x00000000011e3e64 in do_test (i=0, with_pmu=false, with_alias=false) at tests/hwmon_pmu.c:164 #11 0x00000000011e422c in test__hwmon_pmu (with_pmu=false) at tests/hwmon_pmu.c:219 #12 0x00000000011e431c in test__hwmon_pmu_without_pmu (test=0x1610368 <suite.hwmon_pmu>, subtest=1) at tests/hwmon_pmu.c:23 where the attr::config is set to value 292470092988416 or 0x10a0000000000 in line 625 of file ./util/hwmon_pmu.c: attr->config = key.type_and_num; However member key::type_and_num is defined as union and bit field: union hwmon_pmu_event_key { long type_and_num; struct { int num :16; enum hwmon_type type :8; }; }; s390 is big endian and Intel is little endian architecture. The events for the hwmon dummy pmu have num = 1 or num = 2 and type is set to HWMON_TYPE_TEMP (which is 10). On s390 this assignes member key::type_and_num the value of 0x10a0000000000 (which is 292470092988416) as shown in above trace output. Fix this and export the structure/union hwmon_pmu_event_key so the test shares the same implementation as the event parsing functions for union and bit fields. This should avoid endianess issues on all platforms. Output after: # ./perf test -F 11 11.1: Basic parsing test : Ok 11.2: Parsing without PMU name : Ok 11.3: Parsing with PMU name : Ok # Fixes: 531ee0f ("perf test: Add hwmon "PMU" test") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250131112400.568975-1-tmricht@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f1ab283 ] Patch series "Fix calculations in trace_balance_dirty_pages() for cgwb", v2. In my experiment, I found that the output of trace_balance_dirty_pages() in the cgroup writeback scenario was strange because trace_balance_dirty_pages() always uses global_wb_domain.dirty_limit for related calculations instead of the dirty_limit of the corresponding memcg's wb_domain. The basic idea of the fix is to store the hard dirty limit value computed in wb_position_ratio() into struct dirty_throttle_control and use it for calculations in trace_balance_dirty_pages(). This patch (of 3): Currently, trace_balance_dirty_pages() already has 12 parameters. In the patch #3, I initially attempted to introduce an additional parameter. However, in include/linux/trace_events.h, bpf_trace_run12() only supports up to 12 parameters and bpf_trace_run13() does not exist. To reduce the number of parameters in trace_balance_dirty_pages(), we can make it accept a pointer to struct dirty_throttle_control as a parameter. To achieve this, we need to move the definition of struct dirty_throttle_control from mm/page-writeback.c to include/linux/writeback.h. Link: https://lkml.kernel.org/r/20250304110318.159567-1-yizhou.tang@shopee.com Link: https://lkml.kernel.org/r/20250304110318.159567-2-yizhou.tang@shopee.com Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Tang Yizhou <yizhou.tang@shopee.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: 6cc4c3a ("writeback: fix calculations in trace_balance_dirty_pages() for cgwb") Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 053f3ff ] v2: - Created a single error handling unlock and exit in veth_pool_store - Greatly expanded commit message with previous explanatory-only text Summary: Use rtnl_mutex to synchronize veth_pool_store with itself, ibmveth_close and ibmveth_open, preventing multiple calls in a row to napi_disable. Background: Two (or more) threads could call veth_pool_store through writing to /sys/devices/vio/30000002/pool*/*. You can do this easily with a little shell script. This causes a hang. I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new kernel. I ran this test again and saw: Setting pool0/active to 0 Setting pool1/active to 1 [ 73.911067][ T4365] ibmveth 30000002 eth0: close starting Setting pool1/active to 1 Setting pool1/active to 0 [ 73.911367][ T4366] ibmveth 30000002 eth0: close starting [ 73.916056][ T4365] ibmveth 30000002 eth0: close complete [ 73.916064][ T4365] ibmveth 30000002 eth0: open starting [ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds. [ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8 [ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000 [ 243.683852][ T123] Call Trace: [ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable) [ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0 [ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0 [ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210 [ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50 [ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0 [ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60 [ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc [ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270 [ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0 [ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0 [ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650 [ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150 [ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340 [ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec ... [ 243.684087][ T123] Showing all locks held in the system: [ 243.684095][ T123] 1 lock held by khungtaskd/123: [ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248 [ 243.684114][ T123] 4 locks held by stress.sh/4365: [ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60 [ 243.684166][ T123] 5 locks held by stress.sh/4366: [ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684183][ T123] #1: c00000000aee2288 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684194][ T123] #2: c0000000366f4ba8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684205][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_disable+0x30/0x60 [ 243.684216][ T123] #4: c0000003ff9bbf18 (&rq->__lock){-.-.}-{2:2}, at: __schedule+0x138/0x12a0 From the ibmveth debug, two threads are calling veth_pool_store, which calls ibmveth_close and ibmveth_open. Here's the sequence: T4365 T4366 ----------------- ----------------- --------- veth_pool_store veth_pool_store ibmveth_close ibmveth_close napi_disable napi_disable ibmveth_open napi_enable <- HANG ibmveth_close calls napi_disable at the top and ibmveth_open calls napi_enable at the top. https://docs.kernel.org/networking/napi.html]] says The control APIs are not idempotent. Control API calls are safe against concurrent use of datapath APIs but an incorrect sequence of control API calls may result in crashes, deadlocks, or race conditions. For example, calling napi_disable() multiple times in a row will deadlock. In the normal open and close paths, rtnl_mutex is acquired to prevent other callers. This is missing from veth_pool_store. Use rtnl_mutex in veth_pool_store fixes these hangs. Signed-off-by: Dave Marquardt <davemarq@linux.ibm.com> Fixes: 860f242 ("[PATCH] ibmveth change buffer pools dynamically") Reviewed-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250402154403.386744-1-davemarq@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

Two fixes from the recent logging changes: bch2_inconsistent(), bch2_fs_inconsistent() be called from interrupt context, or with rcu_read_lock() held. The one syzbot found is in bch2_bkey_pick_read_device bch2_dev_rcu bch2_fs_inconsistent We're starting to switch to lift the printbufs up to higher levels so we can emit better log messages and print them all in one go (avoid garbling), so that conversion will help with spotting these in the future; when we declare a printbuf it must be flagged if we're in an atomic context. Secondly, in btree_node_write_endio: 00085 BUG: sleeping function called from invalid context at include/linux/sched/mm.h:321 00085 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 618, name: bch-reclaim/fa6 00085 preempt_count: 10001, expected: 0 00085 RCU nest depth: 0, expected: 0 00085 4 locks held by bch-reclaim/fa6/618: 00085 #0: ffffff80d7ccad68 (&j->reclaim_lock){+.+.}-{4:4}, at: bch2_journal_reclaim_thread+0x84/0x198 00085 #1: ffffff80d7c84218 (&c->btree_trans_barrier){.+.+}-{0:0}, at: __bch2_trans_get+0x1c0/0x440 00085 #2: ffffff80cd3f8140 (bcachefs_btree){+.+.}-{0:0}, at: __bch2_trans_get+0x22c/0x440 00085 #3: ffffff80c3823c20 (&vblk->vqs[i].lock){-.-.}-{3:3}, at: virtblk_done+0x58/0x130 00085 irq event stamp: 328 00085 hardirqs last enabled at (327): [<ffffffc080073a14>] finish_task_switch.isra.0+0xbc/0x2a0 00085 hardirqs last disabled at (328): [<ffffffc080971a10>] el1_interrupt+0x20/0x60 00085 softirqs last enabled at (0): [<ffffffc08002f920>] copy_process+0x7c8/0x2118 00085 softirqs last disabled at (0): [<0000000000000000>] 0x0 00085 Preemption disabled at: 00085 [<ffffffc08003ada0>] irq_enter_rcu+0x18/0x90 00085 CPU: 8 UID: 0 PID: 618 Comm: bch-reclaim/fa6 Not tainted 6.14.0-rc6-ktest-g04630bde23e8 #18798 00085 Hardware name: linux,dummy-virt (DT) 00085 Call trace: 00085 show_stack+0x1c/0x30 (C) 00085 dump_stack_lvl+0x84/0xc0 00085 dump_stack+0x14/0x20 00085 __might_resched+0x180/0x288 00085 __might_sleep+0x4c/0x88 00085 __kmalloc_node_track_caller_noprof+0x34c/0x3e0 00085 krealloc_noprof+0x1a0/0x2d8 00085 bch2_printbuf_make_room+0x9c/0x120 00085 bch2_prt_printf+0x60/0x1b8 00085 btree_node_write_endio+0x1b0/0x2d8 00085 bio_endio+0x138/0x1f0 00085 btree_node_write_endio+0xe8/0x2d8 00085 bio_endio+0x138/0x1f0 00085 blk_update_request+0x220/0x4c0 00085 blk_mq_end_request+0x28/0x148 00085 virtblk_request_done+0x64/0xe8 00085 blk_mq_complete_request+0x34/0x40 00085 virtblk_done+0x78/0x130 00085 vring_interrupt+0x6c/0xb0 00085 __handle_irq_event_percpu+0x8c/0x2e0 00085 handle_irq_event+0x50/0xb0 00085 handle_fasteoi_irq+0xc4/0x250 00085 handle_irq_desc+0x44/0x60 00085 generic_handle_domain_irq+0x20/0x30 00085 gic_handle_irq+0x54/0xc8 00085 call_on_irq_stack+0x24/0x40 Reported-by: syzbot+c82cd2906e2f192410bb@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

v2: - Created a single error handling unlock and exit in veth_pool_store - Greatly expanded commit message with previous explanatory-only text Summary: Use rtnl_mutex to synchronize veth_pool_store with itself, ibmveth_close and ibmveth_open, preventing multiple calls in a row to napi_disable. Background: Two (or more) threads could call veth_pool_store through writing to /sys/devices/vio/30000002/pool*/*. You can do this easily with a little shell script. This causes a hang. I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new kernel. I ran this test again and saw: Setting pool0/active to 0 Setting pool1/active to 1 [ 73.911067][ T4365] ibmveth 30000002 eth0: close starting Setting pool1/active to 1 Setting pool1/active to 0 [ 73.911367][ T4366] ibmveth 30000002 eth0: close starting [ 73.916056][ T4365] ibmveth 30000002 eth0: close complete [ 73.916064][ T4365] ibmveth 30000002 eth0: open starting [ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds. [ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8 [ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000 [ 243.683852][ T123] Call Trace: [ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable) [ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0 [ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0 [ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210 [ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50 [ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0 [ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60 [ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc [ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270 [ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0 [ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0 [ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650 [ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150 [ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340 [ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec ... [ 243.684087][ T123] Showing all locks held in the system: [ 243.684095][ T123] 1 lock held by khungtaskd/123: [ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248 [ 243.684114][ T123] 4 locks held by stress.sh/4365: [ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60 [ 243.684166][ T123] 5 locks held by stress.sh/4366: [ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684183][ T123] #1: c00000000aee2288 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684194][ T123] #2: c0000000366f4ba8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684205][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_disable+0x30/0x60 [ 243.684216][ T123] #4: c0000003ff9bbf18 (&rq->__lock){-.-.}-{2:2}, at: __schedule+0x138/0x12a0 From the ibmveth debug, two threads are calling veth_pool_store, which calls ibmveth_close and ibmveth_open. Here's the sequence: T4365 T4366 ----------------- ----------------- --------- veth_pool_store veth_pool_store ibmveth_close ibmveth_close napi_disable napi_disable ibmveth_open napi_enable <- HANG ibmveth_close calls napi_disable at the top and ibmveth_open calls napi_enable at the top. https://docs.kernel.org/networking/napi.html]] says The control APIs are not idempotent. Control API calls are safe against concurrent use of datapath APIs but an incorrect sequence of control API calls may result in crashes, deadlocks, or race conditions. For example, calling napi_disable() multiple times in a row will deadlock. In the normal open and close paths, rtnl_mutex is acquired to prevent other callers. This is missing from veth_pool_store. Use rtnl_mutex in veth_pool_store fixes these hangs. Signed-off-by: Dave Marquardt <davemarq@linux.ibm.com> Fixes: 860f242 ("[PATCH] ibmveth change buffer pools dynamically") Reviewed-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250402154403.386744-1-davemarq@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 52323ed ] syzbot reported a deadlock in lock_system_sleep() (see below). The write operation to "/sys/module/hibernate/parameters/compressor" conflicts with the registration of ieee80211 device, resulting in a deadlock when attempting to acquire system_transition_mutex under param_lock. To avoid this deadlock, change hibernate_compressor_param_set() to use mutex_trylock() for attempting to acquire system_transition_mutex and return -EBUSY when it fails. Task flags need not be saved or adjusted before calling mutex_trylock(&system_transition_mutex) because the caller is not going to end up waiting for this mutex and if it runs concurrently with system suspend in progress, it will be frozen properly when it returns to user space. syzbot report: syz-executor895/5833 is trying to acquire lock: ffffffff8e0828c8 (system_transition_mutex){+.+.}-{4:4}, at: lock_system_sleep+0x87/0xa0 kernel/power/main.c:56 but task is already holding lock: ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: kernel_param_lock kernel/params.c:607 [inline] ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: param_attr_store+0xe6/0x300 kernel/params.c:586 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (param_lock){+.+.}-{4:4}: __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 ieee80211_rate_control_ops_get net/mac80211/rate.c:220 [inline] rate_control_alloc net/mac80211/rate.c:266 [inline] ieee80211_init_rate_ctrl_alg+0x18d/0x6b0 net/mac80211/rate.c:1015 ieee80211_register_hw+0x20cd/0x4060 net/mac80211/main.c:1531 mac80211_hwsim_new_radio+0x304e/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5558 init_mac80211_hwsim+0x432/0x8c0 drivers/net/wireless/virtual/mac80211_hwsim.c:6910 do_one_initcall+0x128/0x700 init/main.c:1257 do_initcall_level init/main.c:1319 [inline] do_initcalls init/main.c:1335 [inline] do_basic_setup init/main.c:1354 [inline] kernel_init_freeable+0x5c7/0x900 init/main.c:1568 kernel_init+0x1c/0x2b0 init/main.c:1457 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #2 (rtnl_mutex){+.+.}-{4:4}: __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 wg_pm_notification drivers/net/wireguard/device.c:80 [inline] wg_pm_notification+0x49/0x180 drivers/net/wireguard/device.c:64 notifier_call_chain+0xb7/0x410 kernel/notifier.c:85 notifier_call_chain_robust kernel/notifier.c:120 [inline] blocking_notifier_call_chain_robust kernel/notifier.c:345 [inline] blocking_notifier_call_chain_robust+0xc9/0x170 kernel/notifier.c:333 pm_notifier_call_chain_robust+0x27/0x60 kernel/power/main.c:102 snapshot_open+0x189/0x2b0 kernel/power/user.c:77 misc_open+0x35a/0x420 drivers/char/misc.c:179 chrdev_open+0x237/0x6a0 fs/char_dev.c:414 do_dentry_open+0x735/0x1c40 fs/open.c:956 vfs_open+0x82/0x3f0 fs/open.c:1086 do_open fs/namei.c:3830 [inline] path_openat+0x1e88/0x2d80 fs/namei.c:3989 do_filp_open+0x20c/0x470 fs/namei.c:4016 do_sys_openat2+0x17a/0x1e0 fs/open.c:1428 do_sys_open fs/open.c:1443 [inline] __do_sys_openat fs/open.c:1459 [inline] __se_sys_openat fs/open.c:1454 [inline] __x64_sys_openat+0x175/0x210 fs/open.c:1454 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 ((pm_chain_head).rwsem){++++}-{4:4}: down_read+0x9a/0x330 kernel/locking/rwsem.c:1524 blocking_notifier_call_chain_robust kernel/notifier.c:344 [inline] blocking_notifier_call_chain_robust+0xa9/0x170 kernel/notifier.c:333 pm_notifier_call_chain_robust+0x27/0x60 kernel/power/main.c:102 snapshot_open+0x189/0x2b0 kernel/power/user.c:77 misc_open+0x35a/0x420 drivers/char/misc.c:179 chrdev_open+0x237/0x6a0 fs/char_dev.c:414 do_dentry_open+0x735/0x1c40 fs/open.c:956 vfs_open+0x82/0x3f0 fs/open.c:1086 do_open fs/namei.c:3830 [inline] path_openat+0x1e88/0x2d80 fs/namei.c:3989 do_filp_open+0x20c/0x470 fs/namei.c:4016 do_sys_openat2+0x17a/0x1e0 fs/open.c:1428 do_sys_open fs/open.c:1443 [inline] __do_sys_openat fs/open.c:1459 [inline] __se_sys_openat fs/open.c:1454 [inline] __x64_sys_openat+0x175/0x210 fs/open.c:1454 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (system_transition_mutex){+.+.}-{4:4}: check_prev_add kernel/locking/lockdep.c:3163 [inline] check_prevs_add kernel/locking/lockdep.c:3282 [inline] validate_chain kernel/locking/lockdep.c:3906 [inline] __lock_acquire+0x249e/0x3c40 kernel/locking/lockdep.c:5228 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 lock_system_sleep+0x87/0xa0 kernel/power/main.c:56 hibernate_compressor_param_set+0x1c/0x210 kernel/power/hibernate.c:1452 param_attr_store+0x18f/0x300 kernel/params.c:588 module_attr_store+0x55/0x80 kernel/params.c:924 sysfs_kf_write+0x117/0x170 fs/sysfs/file.c:139 kernfs_fop_write_iter+0x33d/0x500 fs/kernfs/file.c:334 new_sync_write fs/read_write.c:586 [inline] vfs_write+0x5ae/0x1150 fs/read_write.c:679 ksys_write+0x12b/0x250 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: system_transition_mutex --> rtnl_mutex --> param_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(param_lock); lock(rtnl_mutex); lock(param_lock); lock(system_transition_mutex); *** DEADLOCK *** Reported-by: syzbot+ace60642828c074eb913@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ace60642828c074eb913 Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com> Link: https://patch.msgid.link/20250224013139.3994500-1-lizhi.xu@windriver.com [ rjw: New subject matching the code changes, changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b61e69b ] syzbot report a deadlock in diFree. [1] When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4, which does not match the mounted loop device, causing the mapping of the mounted loop device to be invalidated. When creating the directory and creating the inode of iag in diReadSpecial(), read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the metapage data it returns is corrupted, which causes the nlink value of 0 to be assigned to the iag inode when executing copy_from_dinode(), which ultimately causes a deadlock when entering diFree(). To avoid this, first check the nlink value of dinode before setting iag inode. [1] WARNING: possible recursive locking detected 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted -------------------------------------------- syz-executor301/5309 is trying to acquire lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 but task is already holding lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(imap->im_aglock[index])); lock(&(imap->im_aglock[index])); *** DEADLOCK *** May be due to missing lock nesting notation 5 locks held by syz-executor301/5309: #0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline] #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026 #2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669 stack backtrace: CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037 check_deadlock kernel/locking/lockdep.c:3089 [inline] validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891 __lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156 evict+0x4e8/0x9b0 fs/inode.c:725 diFreeSpecial fs/jfs/jfs_imap.c:552 [inline] duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022 diNewIAG fs/jfs/jfs_imap.c:2597 [inline] diAllocExt fs/jfs/jfs_imap.c:1905 [inline] diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669 diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56 jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdirat fs/namei.c:4295 [inline] __se_sys_mkdirat fs/namei.c:4293 [inline] __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-by: syzbot+355da3b3a74881008e8f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=355da3b3a74881008e8f Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 93ae6e6 upstream. We have recently seen report of lockdep circular lock dependency warnings on platforms like Skylake and Kabylake: ====================================================== WARNING: possible circular locking dependency detected 6.14.0-rc6-CI_DRM_16276-gca2c04fe76e8+ #1 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: ffffffff8360ee48 (iommu_probe_device_lock){+.+.}-{3:3}, at: iommu_probe_device+0x1d/0x70 but task is already holding lock: ffff888102c7efa8 (&device->physical_node_lock){+.+.}-{3:3}, at: intel_iommu_init+0xe75/0x11f0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&device->physical_node_lock){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 intel_iommu_init+0xe75/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #5 (dmar_global_lock){++++}-{3:3}: down_read+0x43/0x1d0 enable_drhd_fault_handling+0x21/0x110 cpuhp_invoke_callback+0x4c6/0x870 cpuhp_issue_call+0xbf/0x1f0 __cpuhp_setup_state_cpuslocked+0x111/0x320 __cpuhp_setup_state+0xb0/0x220 irq_remap_enable_fault_handling+0x3f/0xa0 apic_intr_mode_init+0x5c/0x110 x86_late_time_init+0x24/0x40 start_kernel+0x895/0xbd0 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xbf/0x110 common_startup_64+0x13e/0x141 -> #4 (cpuhp_state_mutex){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 __cpuhp_setup_state_cpuslocked+0x67/0x320 __cpuhp_setup_state+0xb0/0x220 page_alloc_init_cpuhp+0x2d/0x60 mm_core_init+0x18/0x2c0 start_kernel+0x576/0xbd0 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xbf/0x110 common_startup_64+0x13e/0x141 -> #3 (cpu_hotplug_lock){++++}-{0:0}: __cpuhp_state_add_instance+0x4f/0x220 iova_domain_init_rcaches+0x214/0x280 iommu_setup_dma_ops+0x1a4/0x710 iommu_device_register+0x17d/0x260 intel_iommu_init+0xda4/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #2 (&domain->iova_cookie->mutex){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 iommu_setup_dma_ops+0x16b/0x710 iommu_device_register+0x17d/0x260 intel_iommu_init+0xda4/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #1 (&group->mutex){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 __iommu_probe_device+0x24c/0x4e0 probe_iommu_group+0x2b/0x50 bus_for_each_dev+0x7d/0xe0 iommu_device_register+0xe1/0x260 intel_iommu_init+0xda4/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #0 (iommu_probe_device_lock){+.+.}-{3:3}: __lock_acquire+0x1637/0x2810 lock_acquire+0xc9/0x300 __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 iommu_probe_device+0x1d/0x70 intel_iommu_init+0xe90/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 other info that might help us debug this: Chain exists of: iommu_probe_device_lock --> dmar_global_lock --> &device->physical_node_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&device->physical_node_lock); lock(dmar_global_lock); lock(&device->physical_node_lock); lock(iommu_probe_device_lock); *** DEADLOCK *** This driver uses a global lock to protect the list of enumerated DMA remapping units. It is necessary due to the driver's support for dynamic addition and removal of remapping units at runtime. Two distinct code paths require iteration over this remapping unit list: - Device registration and probing: the driver iterates the list to register each remapping unit with the upper layer IOMMU framework and subsequently probe the devices managed by that unit. - Global configuration: Upper layer components may also iterate the list to apply configuration changes. The lock acquisition order between these two code paths was reversed. This caused lockdep warnings, indicating a risk of deadlock. Fix this warning by releasing the global lock before invoking upper layer interfaces for device registration. Fixes: b150654 ("iommu/vt-d: Fix suspicious RCU usage") Closes: https://lore.kernel.org/linux-iommu/SJ1PR11MB612953431F94F18C954C4A9CB9D32@SJ1PR11MB6129.namprd11.prod.outlook.com/ Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20250317035714.1041549-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…cesses commit ef01cac upstream. Acquire a lock on kvm->srcu when userspace is getting MP state to handle a rather extreme edge case where "accepting" APIC events, i.e. processing pending INIT or SIPI, can trigger accesses to guest memory. If the vCPU is in L2 with INIT *and* a TRIPLE_FAULT request pending, then getting MP state will trigger a nested VM-Exit by way of ->check_nested_events(), and emuating the nested VM-Exit can access guest memory. The splat was originally hit by syzkaller on a Google-internal kernel, and reproduced on an upstream kernel by hacking the triple_fault_event_test selftest to stuff a pending INIT, store an MSR on VM-Exit (to generate a memory access on VMX), and do vcpu_mp_state_get() to trigger the scenario. ============================= WARNING: suspicious RCU usage 6.14.0-rc3-b112d356288b-vmx/pi_lockdep_false_pos-lock #3 Not tainted ----------------------------- include/linux/kvm_host.h:1058 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by triple_fault_ev/1256: #0: ffff88810df5a330 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x8b/0x9a0 [kvm] stack backtrace: CPU: 11 UID: 1000 PID: 1256 Comm: triple_fault_ev Not tainted 6.14.0-rc3-b112d356288b-vmx #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x7f/0x90 lockdep_rcu_suspicious+0x144/0x190 kvm_vcpu_gfn_to_memslot+0x156/0x180 [kvm] kvm_vcpu_read_guest+0x3e/0x90 [kvm] read_and_check_msr_entry+0x2e/0x180 [kvm_intel] __nested_vmx_vmexit+0x550/0xde0 [kvm_intel] kvm_check_nested_events+0x1b/0x30 [kvm] kvm_apic_accept_events+0x33/0x100 [kvm] kvm_arch_vcpu_ioctl_get_mpstate+0x30/0x1d0 [kvm] kvm_vcpu_ioctl+0x33e/0x9a0 [kvm] __x64_sys_ioctl+0x8b/0xb0 do_syscall_64+0x6c/0x170 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20250401150504.829812-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…cesses Acquire a lock on kvm->srcu when userspace is getting MP state to handle a rather extreme edge case where "accepting" APIC events, i.e. processing pending INIT or SIPI, can trigger accesses to guest memory. If the vCPU is in L2 with INIT *and* a TRIPLE_FAULT request pending, then getting MP state will trigger a nested VM-Exit by way of ->check_nested_events(), and emuating the nested VM-Exit can access guest memory. The splat was originally hit by syzkaller on a Google-internal kernel, and reproduced on an upstream kernel by hacking the triple_fault_event_test selftest to stuff a pending INIT, store an MSR on VM-Exit (to generate a memory access on VMX), and do vcpu_mp_state_get() to trigger the scenario. ============================= WARNING: suspicious RCU usage 6.14.0-rc3-b112d356288b-vmx/pi_lockdep_false_pos-lock #3 Not tainted ----------------------------- include/linux/kvm_host.h:1058 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by triple_fault_ev/1256: #0: ffff88810df5a330 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x8b/0x9a0 [kvm] stack backtrace: CPU: 11 UID: 1000 PID: 1256 Comm: triple_fault_ev Not tainted 6.14.0-rc3-b112d356288b-vmx #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x7f/0x90 lockdep_rcu_suspicious+0x144/0x190 kvm_vcpu_gfn_to_memslot+0x156/0x180 [kvm] kvm_vcpu_read_guest+0x3e/0x90 [kvm] read_and_check_msr_entry+0x2e/0x180 [kvm_intel] __nested_vmx_vmexit+0x550/0xde0 [kvm_intel] kvm_check_nested_events+0x1b/0x30 [kvm] kvm_apic_accept_events+0x33/0x100 [kvm] kvm_arch_vcpu_ioctl_get_mpstate+0x30/0x1d0 [kvm] kvm_vcpu_ioctl+0x33e/0x9a0 [kvm] __x64_sys_ioctl+0x8b/0xb0 do_syscall_64+0x6c/0x170 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20250401150504.829812-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

There is a potential deadlock if we do report zones in an IO context, detailed in below lockdep report. When one process do a report zones and another process freezes the block device, the report zones side cannot allocate a tag because the freeze is already started. This can thus result in new block group creation to hang forever, blocking the write path. Thankfully, a new block group should be created on empty zones. So, reporting the zones is not necessary and we can set the write pointer = 0 and load the zone capacity from the block layer using bdev_zone_capacity() helper. ====================================================== WARNING: possible circular locking dependency detected 6.14.0-rc1 AsahiLinux#252 Not tainted ------------------------------------------------------ modprobe/1110 is trying to acquire lock: ffff888100ac83e0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0x38f/0xb60 but task is already holding lock: ffff8881205b6f20 (&q->q_usage_counter(queue)AsahiLinux#16){++++}-{0:0}, at: sd_remove+0x85/0x130 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> AsahiLinux#3 (&q->q_usage_counter(queue)AsahiLinux#16){++++}-{0:0}: blk_queue_enter+0x3d9/0x500 blk_mq_alloc_request+0x47d/0x8e0 scsi_execute_cmd+0x14f/0xb80 sd_zbc_do_report_zones+0x1c1/0x470 sd_zbc_report_zones+0x362/0xd60 blkdev_report_zones+0x1b1/0x2e0 btrfs_get_dev_zones+0x215/0x7e0 [btrfs] btrfs_load_block_group_zone_info+0x6d2/0x2c10 [btrfs] btrfs_make_block_group+0x36b/0x870 [btrfs] btrfs_create_chunk+0x147d/0x2320 [btrfs] btrfs_chunk_alloc+0x2ce/0xcf0 [btrfs] start_transaction+0xce6/0x1620 [btrfs] btrfs_uuid_scan_kthread+0x4ee/0x5b0 [btrfs] kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> AsahiLinux#2 (&fs_info->dev_replace.rwsem){++++}-{4:4}: down_read+0x9b/0x470 btrfs_map_block+0x2ce/0x2ce0 [btrfs] btrfs_submit_chunk+0x2d4/0x16c0 [btrfs] btrfs_submit_bbio+0x16/0x30 [btrfs] btree_write_cache_pages+0xb5a/0xf90 [btrfs] do_writepages+0x17f/0x7b0 __writeback_single_inode+0x114/0xb00 writeback_sb_inodes+0x52b/0xe00 wb_writeback+0x1a7/0x800 wb_workfn+0x12a/0xbd0 process_one_work+0x85a/0x1460 worker_thread+0x5e2/0xfc0 kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> AsahiLinux#1 (&fs_info->zoned_meta_io_lock){+.+.}-{4:4}: __mutex_lock+0x1aa/0x1360 btree_write_cache_pages+0x252/0xf90 [btrfs] do_writepages+0x17f/0x7b0 __writeback_single_inode+0x114/0xb00 writeback_sb_inodes+0x52b/0xe00 wb_writeback+0x1a7/0x800 wb_workfn+0x12a/0xbd0 process_one_work+0x85a/0x1460 worker_thread+0x5e2/0xfc0 kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> #0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}: __lock_acquire+0x2f52/0x5ea0 lock_acquire+0x1b1/0x540 __flush_work+0x3ac/0xb60 wb_shutdown+0x15b/0x1f0 bdi_unregister+0x172/0x5b0 del_gendisk+0x841/0xa20 sd_remove+0x85/0x130 device_release_driver_internal+0x368/0x520 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 __scsi_remove_device+0x272/0x340 scsi_forget_host+0xf7/0x170 scsi_remove_host+0xd2/0x2a0 sdebug_driver_remove+0x52/0x2f0 [scsi_debug] device_release_driver_internal+0x368/0x520 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 device_unregister+0x13/0xa0 sdebug_do_remove_host+0x1fb/0x290 [scsi_debug] scsi_debug_exit+0x17/0x70 [scsi_debug] __do_sys_delete_module.isra.0+0x321/0x520 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: (work_completion)(&(&wb->dwork)->work) --> &fs_info->dev_replace.rwsem --> &q->q_usage_counter(queue)AsahiLinux#16 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->q_usage_counter(queue)AsahiLinux#16); lock(&fs_info->dev_replace.rwsem); lock(&q->q_usage_counter(queue)AsahiLinux#16); lock((work_completion)(&(&wb->dwork)->work)); *** DEADLOCK *** 5 locks held by modprobe/1110: #0: ffff88811f7bc108 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520 AsahiLinux#1: ffff8881022ee0e0 (&shost->scan_mutex){+.+.}-{4:4}, at: scsi_remove_host+0x20/0x2a0 AsahiLinux#2: ffff88811b4c4378 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520 AsahiLinux#3: ffff8881205b6f20 (&q->q_usage_counter(queue)AsahiLinux#16){++++}-{0:0}, at: sd_remove+0x85/0x130 AsahiLinux#4: ffffffffa3284360 (rcu_read_lock){....}-{1:3}, at: __flush_work+0xda/0xb60 stack backtrace: CPU: 0 UID: 0 PID: 1110 Comm: modprobe Not tainted 6.14.0-rc1 AsahiLinux#252 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_circular_bug.cold+0x1e0/0x274 check_noncircular+0x306/0x3f0 ? __pfx_check_noncircular+0x10/0x10 ? mark_lock+0xf5/0x1650 ? __pfx_check_irq_usage+0x10/0x10 ? lockdep_lock+0xca/0x1c0 ? __pfx_lockdep_lock+0x10/0x10 __lock_acquire+0x2f52/0x5ea0 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_mark_lock+0x10/0x10 lock_acquire+0x1b1/0x540 ? __flush_work+0x38f/0xb60 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x94/0xe0 ? __flush_work+0x38f/0xb60 __flush_work+0x3ac/0xb60 ? __flush_work+0x38f/0xb60 ? __pfx_mark_lock+0x10/0x10 ? __pfx___flush_work+0x10/0x10 ? __pfx_wq_barrier_func+0x10/0x10 ? __pfx___might_resched+0x10/0x10 ? mark_held_locks+0x94/0xe0 wb_shutdown+0x15b/0x1f0 bdi_unregister+0x172/0x5b0 ? __pfx_bdi_unregister+0x10/0x10 ? up_write+0x1ba/0x510 del_gendisk+0x841/0xa20 ? __pfx_del_gendisk+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x35/0x60 ? __pm_runtime_resume+0x79/0x110 sd_remove+0x85/0x130 device_release_driver_internal+0x368/0x520 ? kobject_put+0x5d/0x4a0 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 ? __pfx_device_del+0x10/0x10 __scsi_remove_device+0x272/0x340 scsi_forget_host+0xf7/0x170 scsi_remove_host+0xd2/0x2a0 sdebug_driver_remove+0x52/0x2f0 [scsi_debug] ? kernfs_remove_by_name_ns+0xc0/0xf0 device_release_driver_internal+0x368/0x520 ? kobject_put+0x5d/0x4a0 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 ? __pfx_device_del+0x10/0x10 ? __pfx___mutex_unlock_slowpath+0x10/0x10 device_unregister+0x13/0xa0 sdebug_do_remove_host+0x1fb/0x290 [scsi_debug] scsi_debug_exit+0x17/0x70 [scsi_debug] __do_sys_delete_module.isra.0+0x321/0x520 ? __pfx___do_sys_delete_module.isra.0+0x10/0x10 ? __pfx_slab_free_after_rcu_debug+0x10/0x10 ? kasan_save_stack+0x2c/0x50 ? kasan_record_aux_stack+0xa3/0xb0 ? __call_rcu_common.constprop.0+0xc4/0xfb0 ? kmem_cache_free+0x3a0/0x590 ? __x64_sys_close+0x78/0xd0 do_syscall_64+0x93/0x180 ? lock_is_held_type+0xd5/0x130 ? __call_rcu_common.constprop.0+0x3c0/0xfb0 ? lockdep_hardirqs_on+0x78/0x100 ? __call_rcu_common.constprop.0+0x3c0/0xfb0 ? __pfx___call_rcu_common.constprop.0+0x10/0x10 ? kmem_cache_free+0x3a0/0x590 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? __pfx___x64_sys_openat+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f436712b68b RSP: 002b:00007ffe9f1a8658 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00005559b367fd80 RCX: 00007f436712b68b RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00005559b367fde8 RBP: 00007ffe9f1a8680 R08: 1999999999999999 R09: 0000000000000000 R10: 00007f43671a5fe0 R11: 0000000000000206 R12: 0000000000000000 R13: 00007ffe9f1a86b0 R14: 0000000000000000 R15: 0000000000000000 </TASK> Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> CC: <stable@vger.kernel.org> # 6.13+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>

[ Upstream commit 1b04495 ] Syzkaller reports a bug as follows: Injecting memory failure for pfn 0x18b00e at process virtual address 0x20ffd000 Memory failure: 0x18b00e: dirty swapcache page still referenced by 2 users Memory failure: 0x18b00e: recovery action for dirty swapcache page: Failed page: refcount:2 mapcount:0 mapping:0000000000000000 index:0x20ffd pfn:0x18b00e memcg:ffff0000dd6d9000 anon flags: 0x5ffffe00482011(locked|dirty|arch_1|swapbacked|hwpoison|node=0|zone=2|lastcpupid=0xfffff) raw: 005ffffe00482011 dead000000000100 dead000000000122 ffff0000e232a7c9 raw: 0000000000020ffd 0000000000000000 00000002ffffffff ffff0000dd6d9000 page dumped because: VM_BUG_ON_FOLIO(!folio_test_uptodate(folio)) ------------[ cut here ]------------ kernel BUG at mm/swap_state.c:184! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Modules linked in: CPU: 0 PID: 60 Comm: kswapd0 Not tainted 6.6.0-gcb097e7de84e #3 Hardware name: linux,dummy-virt (DT) pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : add_to_swap+0xbc/0x158 lr : add_to_swap+0xbc/0x158 sp : ffff800087f37340 x29: ffff800087f37340 x28: fffffc00052c0380 x27: ffff800087f37780 x26: ffff800087f37490 x25: ffff800087f37c78 x24: ffff800087f377a0 x23: ffff800087f37c50 x22: 0000000000000000 x21: fffffc00052c03b4 x20: 0000000000000000 x19: fffffc00052c0380 x18: 0000000000000000 x17: 296f696c6f662865 x16: 7461646f7470755f x15: 747365745f6f696c x14: 6f6621284f494c4f x13: 0000000000000001 x12: ffff600036d8b97b x11: 1fffe00036d8b97a x10: ffff600036d8b97a x9 : dfff800000000000 x8 : 00009fffc9274686 x7 : ffff0001b6c5cbd3 x6 : 0000000000000001 x5 : ffff0000c25896c0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff0000c25896c0 x0 : 0000000000000000 Call trace: add_to_swap+0xbc/0x158 shrink_folio_list+0x12ac/0x2648 shrink_inactive_list+0x318/0x948 shrink_lruvec+0x450/0x720 shrink_node_memcgs+0x280/0x4a8 shrink_node+0x128/0x978 balance_pgdat+0x4f0/0xb20 kswapd+0x228/0x438 kthread+0x214/0x230 ret_from_fork+0x10/0x20 I can reproduce this issue with the following steps: 1) When a dirty swapcache page is isolated by reclaim process and the page isn't locked, inject memory failure for the page. me_swapcache_dirty() clears uptodate flag and tries to delete from lru, but fails. Reclaim process will put the hwpoisoned page back to lru. 2) The process that maps the hwpoisoned page exits, the page is deleted the page will never be freed and will be in the lru forever. 3) If we trigger a reclaim again and tries to reclaim the page, add_to_swap() will trigger VM_BUG_ON_FOLIO due to the uptodate flag is cleared. To fix it, skip the hwpoisoned page in shrink_folio_list(). Besides, the hwpoison folio may not be unmapped by hwpoison_user_mappings() yet, unmap it in shrink_folio_list(), otherwise the folio will fail to be unmaped by hwpoison_user_mappings() since the folio isn't in lru list. Link: https://lkml.kernel.org/r/20250318083939.987651-3-tujinjiang@huawei.com Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com> Acked-by: Miaohe Lin <linmiaohe@huawei.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Nanyong Sun <sunnanyong@huawei.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: <stable@vger,kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 866bafa ] There is a potential deadlock if we do report zones in an IO context, detailed in below lockdep report. When one process do a report zones and another process freezes the block device, the report zones side cannot allocate a tag because the freeze is already started. This can thus result in new block group creation to hang forever, blocking the write path. Thankfully, a new block group should be created on empty zones. So, reporting the zones is not necessary and we can set the write pointer = 0 and load the zone capacity from the block layer using bdev_zone_capacity() helper. ====================================================== WARNING: possible circular locking dependency detected 6.14.0-rc1 #252 Not tainted ------------------------------------------------------ modprobe/1110 is trying to acquire lock: ffff888100ac83e0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0x38f/0xb60 but task is already holding lock: ffff8881205b6f20 (&q->q_usage_counter(queue)#16){++++}-{0:0}, at: sd_remove+0x85/0x130 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&q->q_usage_counter(queue)#16){++++}-{0:0}: blk_queue_enter+0x3d9/0x500 blk_mq_alloc_request+0x47d/0x8e0 scsi_execute_cmd+0x14f/0xb80 sd_zbc_do_report_zones+0x1c1/0x470 sd_zbc_report_zones+0x362/0xd60 blkdev_report_zones+0x1b1/0x2e0 btrfs_get_dev_zones+0x215/0x7e0 [btrfs] btrfs_load_block_group_zone_info+0x6d2/0x2c10 [btrfs] btrfs_make_block_group+0x36b/0x870 [btrfs] btrfs_create_chunk+0x147d/0x2320 [btrfs] btrfs_chunk_alloc+0x2ce/0xcf0 [btrfs] start_transaction+0xce6/0x1620 [btrfs] btrfs_uuid_scan_kthread+0x4ee/0x5b0 [btrfs] kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> #2 (&fs_info->dev_replace.rwsem){++++}-{4:4}: down_read+0x9b/0x470 btrfs_map_block+0x2ce/0x2ce0 [btrfs] btrfs_submit_chunk+0x2d4/0x16c0 [btrfs] btrfs_submit_bbio+0x16/0x30 [btrfs] btree_write_cache_pages+0xb5a/0xf90 [btrfs] do_writepages+0x17f/0x7b0 __writeback_single_inode+0x114/0xb00 writeback_sb_inodes+0x52b/0xe00 wb_writeback+0x1a7/0x800 wb_workfn+0x12a/0xbd0 process_one_work+0x85a/0x1460 worker_thread+0x5e2/0xfc0 kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> #1 (&fs_info->zoned_meta_io_lock){+.+.}-{4:4}: __mutex_lock+0x1aa/0x1360 btree_write_cache_pages+0x252/0xf90 [btrfs] do_writepages+0x17f/0x7b0 __writeback_single_inode+0x114/0xb00 writeback_sb_inodes+0x52b/0xe00 wb_writeback+0x1a7/0x800 wb_workfn+0x12a/0xbd0 process_one_work+0x85a/0x1460 worker_thread+0x5e2/0xfc0 kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> #0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}: __lock_acquire+0x2f52/0x5ea0 lock_acquire+0x1b1/0x540 __flush_work+0x3ac/0xb60 wb_shutdown+0x15b/0x1f0 bdi_unregister+0x172/0x5b0 del_gendisk+0x841/0xa20 sd_remove+0x85/0x130 device_release_driver_internal+0x368/0x520 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 __scsi_remove_device+0x272/0x340 scsi_forget_host+0xf7/0x170 scsi_remove_host+0xd2/0x2a0 sdebug_driver_remove+0x52/0x2f0 [scsi_debug] device_release_driver_internal+0x368/0x520 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 device_unregister+0x13/0xa0 sdebug_do_remove_host+0x1fb/0x290 [scsi_debug] scsi_debug_exit+0x17/0x70 [scsi_debug] __do_sys_delete_module.isra.0+0x321/0x520 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: (work_completion)(&(&wb->dwork)->work) --> &fs_info->dev_replace.rwsem --> &q->q_usage_counter(queue)#16 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->q_usage_counter(queue)#16); lock(&fs_info->dev_replace.rwsem); lock(&q->q_usage_counter(queue)#16); lock((work_completion)(&(&wb->dwork)->work)); *** DEADLOCK *** 5 locks held by modprobe/1110: #0: ffff88811f7bc108 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520 #1: ffff8881022ee0e0 (&shost->scan_mutex){+.+.}-{4:4}, at: scsi_remove_host+0x20/0x2a0 #2: ffff88811b4c4378 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520 #3: ffff8881205b6f20 (&q->q_usage_counter(queue)#16){++++}-{0:0}, at: sd_remove+0x85/0x130 #4: ffffffffa3284360 (rcu_read_lock){....}-{1:3}, at: __flush_work+0xda/0xb60 stack backtrace: CPU: 0 UID: 0 PID: 1110 Comm: modprobe Not tainted 6.14.0-rc1 #252 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_circular_bug.cold+0x1e0/0x274 check_noncircular+0x306/0x3f0 ? __pfx_check_noncircular+0x10/0x10 ? mark_lock+0xf5/0x1650 ? __pfx_check_irq_usage+0x10/0x10 ? lockdep_lock+0xca/0x1c0 ? __pfx_lockdep_lock+0x10/0x10 __lock_acquire+0x2f52/0x5ea0 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_mark_lock+0x10/0x10 lock_acquire+0x1b1/0x540 ? __flush_work+0x38f/0xb60 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x94/0xe0 ? __flush_work+0x38f/0xb60 __flush_work+0x3ac/0xb60 ? __flush_work+0x38f/0xb60 ? __pfx_mark_lock+0x10/0x10 ? __pfx___flush_work+0x10/0x10 ? __pfx_wq_barrier_func+0x10/0x10 ? __pfx___might_resched+0x10/0x10 ? mark_held_locks+0x94/0xe0 wb_shutdown+0x15b/0x1f0 bdi_unregister+0x172/0x5b0 ? __pfx_bdi_unregister+0x10/0x10 ? up_write+0x1ba/0x510 del_gendisk+0x841/0xa20 ? __pfx_del_gendisk+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x35/0x60 ? __pm_runtime_resume+0x79/0x110 sd_remove+0x85/0x130 device_release_driver_internal+0x368/0x520 ? kobject_put+0x5d/0x4a0 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 ? __pfx_device_del+0x10/0x10 __scsi_remove_device+0x272/0x340 scsi_forget_host+0xf7/0x170 scsi_remove_host+0xd2/0x2a0 sdebug_driver_remove+0x52/0x2f0 [scsi_debug] ? kernfs_remove_by_name_ns+0xc0/0xf0 device_release_driver_internal+0x368/0x520 ? kobject_put+0x5d/0x4a0 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 ? __pfx_device_del+0x10/0x10 ? __pfx___mutex_unlock_slowpath+0x10/0x10 device_unregister+0x13/0xa0 sdebug_do_remove_host+0x1fb/0x290 [scsi_debug] scsi_debug_exit+0x17/0x70 [scsi_debug] __do_sys_delete_module.isra.0+0x321/0x520 ? __pfx___do_sys_delete_module.isra.0+0x10/0x10 ? __pfx_slab_free_after_rcu_debug+0x10/0x10 ? kasan_save_stack+0x2c/0x50 ? kasan_record_aux_stack+0xa3/0xb0 ? __call_rcu_common.constprop.0+0xc4/0xfb0 ? kmem_cache_free+0x3a0/0x590 ? __x64_sys_close+0x78/0xd0 do_syscall_64+0x93/0x180 ? lock_is_held_type+0xd5/0x130 ? __call_rcu_common.constprop.0+0x3c0/0xfb0 ? lockdep_hardirqs_on+0x78/0x100 ? __call_rcu_common.constprop.0+0x3c0/0xfb0 ? __pfx___call_rcu_common.constprop.0+0x10/0x10 ? kmem_cache_free+0x3a0/0x590 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? __pfx___x64_sys_openat+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f436712b68b RSP: 002b:00007ffe9f1a8658 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00005559b367fd80 RCX: 00007f436712b68b RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00005559b367fde8 RBP: 00007ffe9f1a8680 R08: 1999999999999999 R09: 0000000000000000 R10: 00007f43671a5fe0 R11: 0000000000000206 R12: 0000000000000000 R13: 00007ffe9f1a86b0 R14: 0000000000000000 R15: 0000000000000000 </TASK> Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> CC: <stable@vger.kernel.org> # 6.13+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.15, round AsahiLinux#3 - Avoid use of uninitialized memcache pointer in user_mem_abort() - Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts to be taken while TGE=0 and fixing an ugly bug on AmpereOne that occurs when taking an interrupt while clearing the xMO bits (AC03_CPU_36) - Prevent VMMs from hiding support for AArch64 at any EL virtualized by KVM - Save/restore the host value for HCRX_EL2 instead of restoring an incorrect fixed value - Make host_stage2_set_owner_locked() check that the entire requested range is memory rather than just the first page

This patch enables support for DYNAMIC_FTRACE_WITH_CALL_OPS on RISC-V. This allows each ftrace callsite to provide an ftrace_ops to the common ftrace trampoline, allowing each callsite to invoke distinct tracer functions without the need to fall back to list processing or to allocate custom trampolines for each callsite. This significantly speeds up cases where multiple distinct trace functions are used and callsites are mostly traced by a single tracer. The idea and most of the implementation is taken from the ARM64's implementation of the same feature. The idea is to place a pointer to the ftrace_ops as a literal at a fixed offset from the function entry point, which can be recovered by the common ftrace trampoline. We use -fpatchable-function-entry to reserve 8 bytes above the function entry by emitting 2 4 byte or 4 2 byte nops depending on the presence of CONFIG_RISCV_ISA_C. These 8 bytes are patched at runtime with a pointer to the associated ftrace_ops for that callsite. Functions are aligned to 8 bytes to make sure that the accesses to this literal are atomic. This approach allows for directly invoking ftrace_ops::func even for ftrace_ops which are dynamically-allocated (or part of a module), without going via ftrace_ops_list_func. We've benchamrked this with the ftrace_ops sample module on Spacemit K1 Jupiter: Without this patch: baseline (Linux rivos 6.14.0-09584-g7d06015d936c AsahiLinux#3 SMP Sat Mar 29 +-----------------------+-----------------+----------------------------+ | Number of tracers | Total time (ns) | Per-call average time | |-----------------------+-----------------+----------------------------| | Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) | |----------+------------+-----------------+------------+---------------| | 0 | 0 | 1357958 | 13 | - | | 0 | 1 | 1302375 | 13 | - | | 0 | 2 | 1302375 | 13 | - | | 0 | 10 | 1379084 | 13 | - | | 0 | 100 | 1302458 | 13 | - | | 0 | 200 | 1302333 | 13 | - | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 13677833 | 136 | 123 | | 1 | 1 | 18500916 | 185 | 172 | | 1 | 2 | 2285645 | 228 | 215 | | 1 | 10 | 58824709 | 588 | 575 | | 1 | 100 | 505141584 | 5051 | 5038 | | 1 | 200 | 1580473126 | 15804 | 15791 | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 13561000 | 135 | 122 | | 2 | 0 | 19707292 | 197 | 184 | | 10 | 0 | 67774750 | 677 | 664 | | 100 | 0 | 714123125 | 7141 | 7128 | | 200 | 0 | 1918065668 | 19180 | 19167 | +----------+------------+-----------------+------------+---------------+ Note: per-call overhead is estimated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. With this patch: v4-rc4 (Linux rivos 6.14.0-09598-gd75747611c93 AsahiLinux#4 SMP Sat Mar 29 +-----------------------+-----------------+----------------------------+ | Number of tracers | Total time (ns) | Per-call average time | |-----------------------+-----------------+----------------------------| | Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) | |----------+------------+-----------------+------------+---------------| | 0 | 0 | 1459917 | 14 | - | | 0 | 1 | 1408000 | 14 | - | | 0 | 2 | 1383792 | 13 | - | | 0 | 10 | 1430709 | 14 | - | | 0 | 100 | 1383791 | 13 | - | | 0 | 200 | 1383750 | 13 | - | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 5238041 | 52 | 38 | | 1 | 1 | 5228542 | 52 | 38 | | 1 | 2 | 5325917 | 53 | 40 | | 1 | 10 | 5299667 | 52 | 38 | | 1 | 100 | 5245250 | 52 | 39 | | 1 | 200 | 5238459 | 52 | 39 | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 5239083 | 52 | 38 | | 2 | 0 | 19449417 | 194 | 181 | | 10 | 0 | 67718584 | 677 | 663 | | 100 | 0 | 709840708 | 7098 | 7085 | | 200 | 0 | 2203580626 | 22035 | 22022 | +----------+------------+-----------------+------------+---------------+ Note: per-call overhead is estimated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. As can be seen from the above: a) Whenever there is a single relevant tracer function associated with a tracee, the overhead of invoking the tracer is constant, and does not scale with the number of tracers which are *not* associated with that tracee. b) The overhead for a single relevant tracer has dropped to ~1/3 of the overhead prior to this series (from 122ns to 38ns). This is largely due to permitting calls to dynamically-allocated ftrace_ops without going through ftrace_ops_list_func. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> [update kconfig, asm, refactor] Signed-off-by: Andy Chiu <andybnac@gmail.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20250407180838.42877-10-andybnac@gmail.com Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>

Isaac J. Manjarres and others added 19 commits August 8, 2021 17:49

arm64: apple: add dwc3 controller and DART nodes

5a8cd2b

Signed-off-by: Sven Peter <sven@svenpeter.dev>

svenpeter42 merged commit e3866e3 into AsahiLinux:devel Aug 8, 2021

svenpeter42 deleted the dart-pr branch September 7, 2021 15:01

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

DART v5 + iommu/next dependencies #3

DART v5 + iommu/next dependencies #3

Uh oh!

svenpeter42 commented Aug 8, 2021

Uh oh!

Uh oh!

DART v5 + iommu/next dependencies #3

DART v5 + iommu/next dependencies #3

Uh oh!

Conversation

svenpeter42 commented Aug 8, 2021

Uh oh!

Uh oh!