Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Multifunction use, long range omni diversity (passive antenna tracker) #61

Open
Dropsleutel opened this issue Apr 25, 2019 · 4 comments

Comments

@Dropsleutel
Copy link

If the software could set all 6 modules, to the same Rx frequency and select the strongest output, via a video switch f.i. 2x CD4066, the unit could be also used as a long range multi diversity basestation with several hi gain antenna.

As here:
https://hobbyking.com/en_us/quanum-overlord-5-8ghz-40ch-6-antenna-diversity-receiver-w-raceband.html
Fi combined with these:
https://www.maartenbaert.be/quadcopters/antennas/triple-feed-patch-array-antenna/

@mike-levenick
Copy link
Contributor

I've looked into doing this as a separate project, but the hardware would be a fair bit different. You would need some sort of switching mosfet or relay to flip between the video signals based off RSSI.

Definitely a project worth looking into, but I'm not sure if it's within the scope of Chorus32. Others may have other opinions tho.

@Dropsleutel
Copy link
Author

The analog video and audio switching there are simple solutions, it is far from complicated!
The easy way would be to use an 8 channel analog video switch (Mux) MAX4312, which is controlled via 3pins in BCD, see example here:

http://www.vwlowen.co.uk/radio/videoswitch3/index.htm
You could use 2 more of these switches for audio left and right.

@AlessandroAU
Copy link
Owner

AlessandroAU commented Apr 25, 2019

Its a good idea, and very doable. You can cut out 90% of the code and just have a simple loop to selecte the best signal. However, modern receivers have some 'other' fancy tricks like vsync reconstruction we can't currently do.

I'm working on something to blow traditional RSSI switching RX's out of the water anyway.

http://www.eevblog.com/forum/projects/image-synthesizing-dsp-receiver-for-analog-fpv-video/

@Dropsleutel
Copy link
Author

Dropsleutel commented Apr 25, 2019

hmm very interesting indeed :) Maybe this circuitry can be also of interest written in Dutch though:)
Called SyncSmurf, it is basically a PLL circuitry, mainly used for receiving weak and noisy ATV signals.
It keeps, generates a strong sync even when signal is bad. No idea if anyone tried for FPV

https://www.pe1rqm.nl/syncsmurf2/

I hope project gets some more attention, because seriously nicejob!

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

3 participants