updated documentation

Author: Johannes S. (joh.raspi)

Breakout Adapter v2/README.md

@@ -54,9 +54,9 @@ V2.0B - OSH Park renderings<br />
 \* **or** 0Ohm resistor/solderbridge if pin is not needed<br /> 
 \** if the led is connected to GPIO13 the led current must be lower then 12mA, calculate the resister value accordingly!
 
-Note:
-Pullup and Pulldown resistors(R1, R2, R3, R4) can range from 4.7K to 10K.
-Pullup and Pulldown resistor for the LDO enable pin(R5, R8) should be 10K or higher (100K max).
+Note:  
+Pullup and Pulldown resistors(R1, R2, R3, R4) can range from 4.7K to 10K.  
+Pullup and Pulldown resistor for the LDO enable pin(R5, R8) should be 10K or higher (100K max).  
 Input and output capacitors for the voltage regualtor(C1, C2) are LOW ESR ceramic types. (I'm using: SAMSUNG CL21A106KOQNNNG) 
 
 Pinheader