Mention sdcard size limit

[razzeee]

Hey,

it seems, like trying to flash the kobra go firmware from a big sdcard (in my case 32gb) will not work. I've read online (https://www.reddit.com/r/anycubickobra/comments/128mwjy/comment/jekum8n/) that it should be below 16gb. And I con confirm, that it works with 4GB - would be nice to mention that somewhere.

Cheers

[1coderookie]

Thanks, I actually have a section about it: https://1coderookie.github.io/KobraGoNeoInsights/hardware/other/#microsd-card
users reported to me that 32GB also worked, AC suggests to stay =/<8GB. I just added a link to a blog article from AC in the section.

[razzeee]

That doesn't seem to reflect what happened to me. I used a 32gb, that I previously used for sliced files. It worked fine for that.

If I placed the firmware.bin, the printer started up normally, without flashing.

[1coderookie]

Well, what should I say - as described there, it also doesn't reflect what happened to me, but still I had users reporting flashing worked fine for them with a bigger card as well/instead, just like that random user you posted the link of who reported 16GB working (btw, he talks about the cardreader at the screen of the Kobra and flashing the screen fw, which doesn't apply for the Kobra Go/Neo). So it's nothing 'official', it's just someone who claimed that a bigger card than 8GB worked for him. And as mentioned, AC suggests to not go bigger than 8GB - which apparently also didn't work for you and for me tho since we both ended up using 4GB cards.
So I'm afraid I can't present it better/more 'definitive' than what's written at that section right now, cus in the end it seems that one has to try different cards until one works.. :(

[razzeee]

It's fine, at least it's documented here now. I ended up using a 4gb mostly cause it was the first card I found :)

[1coderookie]

It was documented all the time.. ;)