GVM 21.x Integration

First, verify that GVM is running and configured properly by running gvm-start. If no errors are displayed, ensure that you can login to the web UI at https://127.0.0.1:9390. If there are any errors displayed, Sn1per may not be able to communicate with GVM properly. Run gvm-check-setup to check your setup again.

NOTE: This integration requires GVM 21.x and a valid Sn1per Professional v10.0 or higher to work properly.

To integrate GVM 21.x vulnerability scans into Sn1per Professional v10.0 or higher, create a copy of the default Sn1per configuration template (cp -vf /sniper/conf/default /sniper/conf/gvm_vulnerability_scan.conf) and enter the appropriate values for the following:

# OPENVAS CONFIG
OPENVAS="1"
OPENVAS_USERNAME="admin"
OPENVAS_PASSWORD='mypasswordhere!'
OPENVAS_HOST="127.0.0.1"
OPENVAS_PORT="9390"
OPENVAS_RUNAS_USER="kali"

NOTE: You will need to specify a local (non-root) Linux account to initiate GVM 21.x scans using Sn1per by updating the "OPENVAS_RUNAS_USER" setting in your Sn1per configuration file.

After the settings have been updated to match your environment, you can initiate an OpenVAS scan automatically by running a "normal" or "vulnscan" mode in Sn1per Professional and specifying the new configuration template you just created (ie. /sniper/conf/gvm_vulnerability_scan.conf). This can also be done from the command line by running the following:

Example Usage:

sniper -t 127.0.0.1 -c /sniper/conf/gvm_vulnerability_scan.conf -m vulnscan -w 127.0.0.1

Demo: https://www.youtube.com/watch?v=aoTlT6U6Phk